Shop By Product Matching "280"
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - INFINITI M45 |
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - INFINITI M45 |
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 2003 - INFINITI M45 | Fr:07-00-02 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - INFINITI M45 |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 15208-31U00 Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.685
- Burst Pressure: 363
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
102867, 27356, 3323, 37356, 47356, 57356, 57356XP, 618-57356, 67356, 67356BP, 67356X, 7356, 763, 8-57356, 84356, C-1614, C-1821XPL, DG7317...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2003 - INFINITI M45 | V | 4500 | Canada | 8 Cyl 4.5L | - |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 15208-31U00 Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.685
- Burst Pressure: 363
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
102867, 27356, 3323, 37356, 47356, 57356, 57356XP, 618-57356, 67356, 67356BP, 67356X, 7356, 763, 8-57356, 84356, C-1614, C-1821XPL, DG7317...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2003 - INFINITI M45 | V | 4500 | Canada | 8 Cyl 4.5L | - |
- Dark Tint
- Sunroof Wind Deflector; Dark Tint;
- Sunroof Wind Deflector
- Product Attributes:
- Sunroof Type: Fits Oem
- WARNING CA Proposition 65: No
-
Features:
- Excellent Reduction Of In-Cabin Wind Noise
- 4mm Thick Tinted Cast Acrylic
- Fits Sunroof Opening Precisely
- Held In Place With MagiClip Fastening System
- AirCushion Gasket Seals Edge
- Sleek/Sophisticated Look
- Fits Factory Installed Sunroofs
- Lets The Fresh Air In
- The WeatherTech Sunroof Wind Deflector gives you an excellent reduction of in cabin wind noise and air turbulence. It is crafted in Germany from the finest 4mm thick, tinted cast acrylic. Our sunroof deflector fits the sunroof opening precisely, and is held securely in place with the MagiClip vehicle specific fastening system. To protect your vehicles finish, the unique AirCushion gasket seals the edge of the deflector. WeatherTech Sunroof Wind Deflectors sleek and sophisticated look is a great addition to any vehicle. Let the fresh air in. The WeatherTech Sunroof Wind Deflector is manufactured to fit factory installed sunroofs and is not intended nor guaranteed to fit aftermarket installations. WeatherTech(R) Sunroof Wind Deflector are guaranteed against faulty materials and workmanship for a period of three years.
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - INFINITI M45 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 15208-31U00 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.685
- Burst Pressure: 363
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0151855, 0FE00380, 102867, 1150105980, 1502006, 15208-31U00, 15208-31U01, 15208-7B000, 1520831U00L, 1520831U0A, 1520831U0B, 1520831U1B, 152089E01A, 15208HC400, 15208HC401, 15400-PLC-003, 15400-PLC-004, 15400-PLM-A01...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2003 - INFINITI M45 | V | 4500 | Canada | 8 Cyl 4.5L | - |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - INFINITI M45 | V | 4500 | Upper | 8 Cyl 4.5L | - |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - INFINITI M45 | V | 4500 | Lower | 8 Cyl 4.5L | - |
Showing 1 - 10 of 19 products
Loading...