Image
Product
Price
- Air-Fuel Ratio Sensor 4 Wire, Direct Fit, Heated, Wire Length: 20.47
- DENSO is the O.E. Manufacturer / Direct Fit Air Fuel Ratio Sensor OE
- Air / Fuel Ratio Sensor - OE Style
- Product Attributes:
- Sensor Type: Wide-band
- Connector Gender: Female
- Grade Type: Standard Replacement
- Wiring Harness Length: 20.47
- Thread Diameter: 0.711
- Wire Quantity: 4
- DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement… and a first time fit.; DENSO gives you the right part and the right fit… the first time.
This Part Fits the Following OEM/Substitute Numbers:
15501, 213-2850, 22641AA140, 22641AA280, 2349015, 24664, 250-54011, 350-64022, 75-3250, ES10936, OS1940, SG1858
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Subaru Baja | Upstream |
- When replacing a CV Axle, it is recommended that the intermediate shaft be inspected for damage and replaced if necessary Standard Duty Replacement
- AAR CV Axle Shaft
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
193N, 22200, 28021AC280, 28021FC090, 28321AE02B, 28321AE050, 28321AE060, 28321AE07B, 28321FE040, 28321FE081, 28321FE090, 28321FE110, 28321SA030, 28321SA050, 299011, 410808, 4157, 60-7259...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Subaru Baja | Front |
- Ignition Knock (Detonation) Sensor For Subaru Impreza Forester Outback Legacy
- Mpulse Ignition Knock (Detonation) Sensor SEN-2KNC0135 For Subaru Impreza Forester Outback Legacy Baja Saab 9-2X
- Mpulse
- Product Attributes:
- WebNameEbay4: For Subaru Impreza Forester Baja Ignition Knock (detonation) Sensor Sen-2knc0135
- ComponentsSummaryRegularWithBrands: Mpulse Ignition Knock (detonation) Sensor
- ComponentsSummaryShort: Ignition Knock (detonation) Sensor
- ComponentsSummaryLongWithBrands: 1x Mpulse Ignition Knock (detonation) Sensor
- WebNamePlain: Mpulse Ignition Knock (detonation) Sensor Sen-2knc0135
- ComponentsSummaryShortWithBrands: Mpulse Ignition Knock (detonation) Sensor
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Ignition Knock (detonation) Sensor
- WebNameLong: Mpulse Ignition Knock (detonation) Sensor Sen-2knc0135 For Subaru Impreza Forester Outback Legacy Baja Saab 9-2x
- WebNameShort: Ignition Knock (detonation) Sensor Sen-2knc0135 For Subaru Impreza Forester Outback Legacy Baja Saab
- ComponentsSummaryRegular: Ignition Knock (detonation) Sensor
- WebNameRegular: Mpulse Ignition Knock (detonation) Sensor Sen-2knc0135 For Subaru Impreza Forester Outback Legacy Baja Saab 9-2x
- WebNameEbay2: Ignition Knock (detonation) Sensor Sen-2knc0135 For Subaru Impreza Forester
- WebNameEbay3: Ignition Knock (detonation) Sensor Sen-2knc0135 For Subaru Impreza Forester Baja
- WebNameEbay: Ignition Knock (detonation) Sensor For Subaru Impreza Forester Outback Legacy
-
Features:
- mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
- Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
- Made with corrosion-free coating for highest durability on the market
- Direct plug-in OE replacement for proper fit and function for an unmatched experience
- mPulse offers an extensive range of sensors that restores your vehicle to factory levels of performance
- Part Reference Numbers : 5S2334 S8880 2KNC0135 DKS720 ID0224 22060-AA100 KS280
- Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
22060-AA100, 2KNC0135, 5S2334, DKS720, ID0224, KS280, N/A, S8880
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Subaru Baja | H | 2458 | 4 Cyl 2.5L | - |
- Multi-Purpose O-Ring
- FEL-PRO 35524 Multi-Purpose O-Ring for Subaru Outback
- Product Attributes:
- : O-ring
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
112251, 21236-AA000, 21236-AA010, 21236AA000, 21236AA010, 21236AA050, 21236AA100, 33661, 635493, 711110600, 74-0204, 740204, C31197, C31748, C31766, C32711, MD158570, MD170031...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Subaru Baja | H | 2458 | 4 Cyl 2.5L | - |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
052-3586, 052-4062, 22026, 28015-AA021, 28015-AA040, 28015-AA080, 32006249, 417.47006, 710464
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Subaru Baja | Front Inner |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-4012, 28016-AA011, 28016-AA011NT, 28316-AE000, 28316-FE000, 32006324, 38-01308, 38-01316, 38-09800, 40210-01E00, 40210-16E00, 43210-01E00, 43210-16E00, 513015, 517008, 64-02273, 906000006, CR7016...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Subaru Baja | Front |
- FRAM, XG9688, Oil Filter
- Spin-on Oil Filter Supersedes XG3593A (Consolidation)
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.130
- Non Slip Grip: Yes
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Ultimate
- Gasket Outside Diameter: 2.420
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 1719859...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Subaru Baja |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Subaru Baja
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 20 Minutes
- CURT 11280 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Subaru Baja
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 20 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Subaru Baja (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Subaru Baja | H | 2458 | Rear | 4 Cyl 2.5L | - |
- Class 1 Trailer Hitch; 1-1/4in. Ball Mount; Select Subaru Baja
- Includes Std Ball Mount/Pin/Clip; 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 20 Minutes
- CURT 112803 Class 1 Trailer Hitch with Ball Mount; 1-1/4-In Receiver; Fits Select Subaru Baja
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 20 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- 1 1/4 In. X 1 1/4 In. Ball Mount Features A 3/4 In. Hole
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Subaru Baja (see application info to verify fitment). The hitch integrates with the vehicles frame and provides a useful and dependable 1-1/4 in. x 1-1/4 in. receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 350 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4 in. trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid Bonderite for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where youre headed or which season of the year you're towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Subaru Baja | H | 2458 | Rear | 4 Cyl 2.5L | - |
Showing 1 - 10 of 29 products
Loading...