Shop By Product Matching "280"

Choose your Submodel for your 2004 Ford F-250 Super Duty


Showing 1 - 10 of 89 products
Image
SKU
Product
Rating
Price

Genuine
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Block CC Engine CID
2004 - Ford F-250 Super Duty V - 10 Cyl 6.8L 415

Mile Marker
  • For Truck/SUV; 18000 lb. Capacity
  • SEC18 ES Premium Winch; For Truck/SUV; 18000 lb. Capacity;
  • SEC18 ES Premium Winch
  • Product Attributes:
    • Voltage: Na
    • Rated Single Line Pull (lbs.): 18000
    • WARNING CA Proposition 65: No
  • Features:
    • Planetary Gear System For Fast Line Speed
    • Automatic Load-Holding Brake
    • Free Spooling
    • Power In And Out
    • Low Electric Current
    • Waterproof - Fully Submersible
  • Mile Marker's most powerful electric w in. to date: the SEC18(es). With 18,000 pounds of pulling and recovery power, this electric w in. can be utilized in many applications from tow trucks to industrial DC; due to its relatively light weight and wide range of accommodations. The SEC18(es) features fast line speed, is completely sealed, and meets SAE J706 Standards.

Additional Fitment Information:
Vehicle
2004 - Ford F-250 Super Duty

Mile Marker
  • For Truck/SUV; 18000 lb. Capacity
  • SEC18 ES Premium Winch; For Truck/SUV; 18000 lb. Capacity;
  • SEC18 ES Premium Winch
  • Product Attributes:
    • Voltage: Na
    • Rated Single Line Pull (lbs.): 18000
    • WARNING CA Proposition 65: No
  • Features:
    • Planetary Gear System For Fast Line Speed
    • Automatic Load-Holding Brake
    • Free Spooling
    • Power In And Out
    • Low Electric Current
    • Waterproof - Fully Submersible
  • Mile Marker's most powerful electric w in. to date: the SEC18(es). With 18,000 pounds of pulling and recovery power, this electric w in. can be utilized in many applications from tow trucks to industrial DC; due to its relatively light weight and wide range of accommodations. The SEC18(es) features fast line speed, is completely sealed, and meets SAE J706 Standards.

Additional Fitment Information:
Vehicle
2004 - Ford F-250 Super Duty

Delphi
  • Fuel Pump and Strainer Set
  • Used to Service Modules With Ford OEM Module Style Connector with Midship Tank
  • Product Attributes:
    • Connector Gender: Female
    • Voltage: 12.0
    • Grade Type: Premium
    • Fuel Type: Gas
    • Connector Shape: Square
    • Fuel Tank Pressure Sensor Included: No
    • Minimum Pressure: 44
    • Strainer Color: White
    • Outlet Quantity: 1
    • Pump Placement: In Tank
    • Average Flow Rating: 36.0
    • Average Current Draw: 7.0
    • Maximum Pressure: 85.0
    • Pump Type: Electric
    • Fuel Pump Type: Electrical
    • Outlet Outside Diameter: 0.313
    • Terminal Quantity: 2
    • Gasket Or Seal Included: Yes
    • Internal Or External Strainer: External
    • Wiring Harness Included: No
    • Terminal Type: Blade
    • Terminal Gender: Male
    • Regulator Included: No
    • Strainer Included: Yes
  • Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

This Part Fits the Following OEM/Substitute Numbers:
1F1Z 9H307-A, 1F1Z9H307A, 3C3Z 9H307-EC, 3C3Z 9H307-FC, 3C3Z 9H307-GD, 3C3Z 9H307-KB, 3C3Z9H307EC, 3C3Z9H307FC, 3C3Z9H307GD, 3C3Z9H307KB, 3C7Z 9H307-NB, 3C7Z 9H307-PB, 3C7Z9H307NB, 3C7Z9H307PB, 5211000, 67122, 67136, 67158...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2004 - Ford F-250 Super Duty V - 8 Cyl 5.4L 330

CURT
  • Replacement USCAR Socket with 24in. Wires (Vehicle Side)
  • 24 in. Bonded Wire For Models w/Factory Tow Package
  • CURT 56229 Replacement USCAR Connector Wiring Harness; 24-Inch Wires; 7 Pin Trailer Wiring
  • 7-Way USCAR Electrical Connector
  • Features:
    • Replaces Damaged Or Missing Uscar Vehicle Harnesses
    • Includes 24 In. Color-Coded Bonded Wires For Easy Installation
    • Made In USA
  • Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24 in. of bonded wire for easy splicing into your vehicles wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.

Additional Fitment Information:
Vehicle
2004 - Ford F-250 Super Duty

Husky Towing
  • 7 Way Blade and 4 Way Flat
  • With Factory Tow Package
  • 7 Way Blade and 4 Way Flat Plug-In Style
  • Endurance ™
  • Product Attributes:
    • End Type: 7-way Rv Blade And 4-way Flat
    • Vehicle End or Trailer End: Vehicle End
    • Prop 65 Y/N: Y
  • Features:
    • Connects To Your Vehicle?s OEM Tow Package Connector
    • Easy-Open, Weatherproof Lid With Rugged, Oversized Hinge Allows Lid To Open 180 Degrees
    • Impact And Corrosion Resistant
    • Plug-In Simple(R) : No Cutting, No Splicing, Saves Time
    • Limited 3 Year Warranty
  • Husky Towing Products offers innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.

Additional Fitment Information:
Vehicle
2004 - Ford F-250 Super Duty

Husky Towing
  • 7 Way Blade and 4 Way Flat
  • 7 Way Blade and 4 Way Flat; Plug-In Style; With Factory Tow Package
  • 7 Way Blade and 4 Way Flat Plug-In Style
  • Endurance
  • Product Attributes:
    • End Type: 7-way Rv Blade And 4-way Flat
    • Vehicle End or Trailer End: Vehicle End
    • Prop 65 Y/N: Y
  • Features:
    • Connects To Your Vehicle?s OEM Tow Package Connector
    • Easy-Open, Weatherproof Lid With Rugged, Oversized Hinge Allows Lid To Open 180 Degrees
    • Impact And Corrosion Resistant
    • Plug-In Simple(R) : No Cutting, No Splicing, Saves Time
    • Limited 3 Year Warranty
  • Husky Towing Products offers innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.

Additional Fitment Information:
Vehicle
2004 - Ford F-250 Super Duty

Husky Liners
  • Front Floor Liners
  • Tech Info: Front Floor Liner Set -- Fits Rear Wheel Drive and Four Wheel Drive models. Does not fit trucks with a manual transfer case shifter. Manual Transfer Case Shifter: Vehicle not equipped with a Manual Transfer Case Shifter
  • X-act Contour - Front Floor Liners
  • Product Attributes:
    • CA Prop 65 Type: Cancer And Reproductive
    • Location: Front Row
    • CA Prop 65: Y
    • Category: X-act Contour Series
    • Requires Drilling: No
  • Features:
    • Thinner plastic floor mats warp and curl over time. X-act Contour® is engineered to stay true to the shape of your floorboards for life. It's strong yet pliable material is easy to remove and clean no matter what comes down.
    • Our FormFit Design™ process perfectly forms each liner to the detailed contours of your specific ride. How? Well… our Nerds use lasers and computers to precisely measure each individual make and model’s floorboard to create the perfect fit.
    • With the perfect balance of strength and softness, our rubberized DuraGrip™ material delivers no-slip, no-slide, driving confidence no matter what the road brings.
    • Our patented FormFit Edge™ features a raised ridge that runs along the door jam, protecting your truck, van, or SUV from all manner of muck.
    • Over vinyl or carpet, our StayPut™ Cleats firmly lock to your factory anchors. It's rock-steady stability underfoot, only by Husky.
    • When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem with this or any Husky product, we’ll replace it.
    • Folds and molds for easy installation, removal and cleanup. Just yank it out, spray it down, and carry on.
    • Proudly made in the USA.
  • Line your floorboards with laser-fit toughness. X-Act Contour® mats are super-rugged wherever adventure takes you, soft and pliable where it counts. Our no-slip rubberized DuraGrip™ material stands up to whatever you're laying down with legendary Husky durability---guaranteed for life.

Additional Fitment Information:
Vehicle Position Region Body
2004 - Ford F-250 Super Duty Front United States Standard Cab Pickup

CURT
  • Xtra Duty Class 5 Trailer Hitch; 2in. Receiver; Select Ford F250; F350; F450
  • 17000lbs. Gross Trailer Weight; 1700lbs. Tongue Weight; 17000lbs. Weight Distributing; 1700lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
  • CURT 15410 Xtra Duty Class 5 Trailer Hitch; 2-In Receiver; Compatible with Select Ford F-250; F-350; F-450 Super Duty
  • Class V 2 in. Xtra Duty Hitch
  • Product Attributes:
    • Gross Trailer Weight: 17000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 17000
    • Body Shape: Square
    • WD Tongue Weight: 2550
    • Install Time: 30 Minutes
    • WC Tongue Weight: 2550
    • Weight Distribution: 17000
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Large Powerful Main Body
    • Protected By A Highly Durable Carbide Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Features Wide Safety Chain Openings For Heavy-Duty Hooks
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • When we came to the limits of towing capacity, we wanted to know what else was out there. What could we discover off the beaten path? So, we kept going. CURT class 5 Xtra Duty hitches begin a class of their own, beyond class 4 and beyond anything the standards dictate. They are designed for the hard road where only full-size pickup trucks, vans and SUVs dare to tread. They are capable of pulling almost any heavy-duty trailer, including toy haulers, dump trailers, logging trailers, small yacht trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component). This particular Xtra Duty class 5 trailer hitch offers a gross trailer weight capacity of 17,000 lbs. and an extra-high tongue weight capacity of 2,550 lbs. It features a 2 in. x 2 in. receiver tube opening to accept a ball mount or hitch-mounted accessory, such as a cargo carrier or w in. mount. It is designed to be a custom-fit trailer hitch for certain years of the Ford F250 Super Duty, F350 Super Duty and F450 Super Duty (to verify compatibility with your vehicle, see application info). For a little extra towing power and stability, this class 5 hitch can also be used in combination with a weight distributing hitch. It is rated for 17,000 lbs. WD and 2,550 lbs. WDTW. In our drive to create a more powerful hitch, CURT has not neglected the finer details. Our class 5 trailer hitches are welded with precision and go through multiple stages of cleaning to create a smooth surface that is ready to accept our co-cured finish. To protect them from corrosion, chipping and UV damage, these hitches are immersed in a liquid Bonderite and then finished in a high-quality black carbide powder coat. They come with grade-8 mounting hardware for solid installation.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Ford F-250 Super Duty V - Rear 8 Cyl 6.0L 363

Putco
  • Bulb Type H10 Pair
  • ProLux Zero Space; Bulb Type H10 Pair;
  • ProLux Zero Space
  • Product Attributes:
    • Industry/OE Number: H10
    • WARNING CA Proposition 65: Yes
  • Features:
    • Same Great Features As Silver Lux Pro
    • Custom Aluminum Tower Design
    • Bright White Light Rated At 6000K
    • Made In USA
    • 3 Year Warranty
  • Equal in size to factory halogen bulb and 30% smaller heat sink than standard silver-lux pro. Same great features as silver-lux pro increases light visibility dramatically. Custom aluminum tower designed to correctly position the led behind in the lens. Each lamp includes a cree xhp70 led - with 180 degree beam angle and 6000 lumen output per kit. Bright white light rated at 6000k. Made in usa. 3 year warranty.

Additional Fitment Information:
Vehicle
2004 - Ford F-250 Super Duty
Showing 1 - 10 of 89 products

Loading...