Shop By Product Matching "280"
Image
Product
Price
- with 1st Design
(w/o Pump Casting Metal- Gasket Material)
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Pontiac Grand Prix |
- Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Impala Buic
- TOR Front Suspension Control Arm Assembly And Tie Rod End Kit For Chevrolet Impala Buick LaCrosse Pontiac Grand Prix Century Allure Monte Carlo Regal Oldsmobile Intrigue Limited Left Right KTR-102807
- TOR
- Product Attributes:
- WebNameEbay4: For Chevrolet Impala Buick Front Suspension Control Arm Assembly Tie Rod End Kit
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Control Arm And Ball Joint Assembly, 2x Tor Steering Tie Rod End
- ComponentsSummaryShort: 2x Control Arm W/ Ball Joint 2x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Lower Tor Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Tor Steering Tie Rod End (both Side)
- WebNamePlain: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit Ktr-102807
- ComponentsSummaryShortWithBrands: 2x Tor Control Arm W/ Ball Joint 2x Tor Tie Rod End
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Lower Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Steering Tie Rod End (both Side)
- WebNameLong: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Century Allure Monte Carlo Regal Oldsmobile Intrigue Limited - Left Right Side (driver Passenger) Ktr-102807
- WebNameShort: Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Impala Buick Lacrosse Ktr-102807
- ComponentsSummaryRegular: 2x Suspension Control Arm And Ball Joint Assembly, 2x Steering Tie Rod End
- WebNameRegular: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Century Allure Monte Carlo Regal Oldsmobile Intrigue Limited Left Right Ktr-102807
- WebNameEbay2: [front] Suspension Control Arm Assembly And Tie Rod End Kit For Chevrolet Impala
- WebNameEbay3: Suspension Control Arm Assembly Tie Rod End Front Kit For Chevrolet Impala Buick
- WebNameEbay: Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Impala Buick
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
- Kit Variations: KTR-102926
- Part Reference Numbers : BK80539 CB90023PR CB92063PR CB90023 CB92063 MS20329 GS20329 CMS20329 CK620675 CK80539 K620675 K80539 RK620675 RK80539 192302 2605586 TK620675 TK80539 BK80538 CB90024PR CB92064PR CB90024 CB92064 MS20328 GS20328 CMS2
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
182302, 192302, 21100023, 21100024, 2605586, 2605587, 2693045, 401-1707, 507-1358, 507-1359, 520-145, 520-146, 520-155, 520-156, 520-165, 520-166, 534-605, 89100034...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Pontiac Grand Prix | Front |
- Rear Strut And Spring Kit For Chevrolet Impala Buick LaCrosse Pontiac Grand Pri
- Excludes 17" and 18" Wheels, Police and Taxi
- Transit Auto Rear Complete Suspension Shocks Strut And Coil Spring Mount Assemblies Kit For Chevrolet Impala Buick LaCrosse Pontiac Grand Prix Allure Excludes 17" 18" Wheels Police Taxi - K78A-100280
- Transit Auto
- Product Attributes:
- WebNameEbay4: For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Rear Strut And Spring Kit
- ComponentsSummaryRegularWithBrands: 2x Unity Automotive Suspension Strut And Coil Spring Assembly
- ComponentsSummaryShort: 2x Complete Strut
- ComponentsSummaryLongWithBrands: 2x Rear Unity Automotive Suspension Strut And Coil Spring Assembly (both Side)
- WebNamePlain: Transit Auto Rear Complete Suspension Shocks Strut And Coil Spring Mount Assemblies Kit K78a-100280
- ComponentsSummaryShortWithBrands: 2x Unity Complete Strut
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Rear Suspension Strut And Coil Spring Assembly (both Side)
- WebNameLong: Transit Auto Rear Complete Suspension Shocks Strut And Coil Spring Mount Assemblies Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Allure Excludes 17" 18" Wheels Police Taxi - Left Right Side (driver Passenger) K78a-100280
- WebNameShort: Rear Strut Coil Spring Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Allure K78a-100280
- ComponentsSummaryRegular: 2x Suspension Strut And Coil Spring Assembly
- WebNameRegular: Transit Auto Rear Complete Suspension Shocks Strut And Coil Spring Mount Assemblies Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Allure Excludes 17" 18" Wheels Police Taxi - K78a-100280
- WebNameEbay2: [rear] Strut & Spring Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix
- WebNameEbay3: Strut And Spring Rear Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix
- WebNameEbay: Rear Strut And Spring Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix
-
Features:
- Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle's weight
- Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- Premium upper strut mount helps ensure smooth, "like-new" steering precision and prevents noise, vibration, harshness and memory steer
- Kit Includes: 2x Rear Unity Automotive Suspension Strut and Coil Spring Assembly (Both Side)
- Kit Variations: KSS-104207 KSS-104256
- Part Reference Numbers : 1332347L 2332304L 3332304L G56924 810215 SR4093 271662 281662 371662 381662 471662 481662 271662L 281662L 371662L 381662L 471662L 481662L 90101079L 811282 V271662L 15311 W1332347L 1332347R 2332304R 3332304R G56925
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
1332347, 1332347L, 1332347R, 15311, 15312, 2332304, 2332304L, 2332304R, 271662, 271662L, 271662R, 281662, 281662L, 281662R, 3332304, 3332304L, 3332304R, 371662...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Pontiac Grand Prix | Rear |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2004 - Pontiac Grand Prix | Canada |
- 1 Piece Bushing Original Design
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10260991, 12800, 1403005, 45G9298, 602.66050, FB718, GK6715, JBU736, K6715, MK6715, TD4106W
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Pontiac Grand Prix | Front Lower Rearward |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Pontiac Grand Prix | V | 3800 | 6 Cyl 3.8L | 231 |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Pontiac Grand Prix | V | 3800 | 6 Cyl 3.8L | 231 |
- Front Floor Mats
- Heavy Duty Floor Mats - Front Floor Mats
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- Location: Front Row
- CA Prop 65: Y
- Category: Heavy Duty Floor Mats
- Fitment: Semi-universal Fit
- Requires Drilling: No
- Driver Position: Left Hand Drive Only
-
Features:
- Easily cleaned with patented Nibs on the reverse side to keep mat from shifting.
- The perimeter edge is raised to help keep all manner of mess contained, right where you want it.
- Our raised ridges help to keep your feet out of the mud, water, and dirt you just tracked in. You’re welcome.
- With the perfect balance of strength and softness, our rubberized DuraGrip™ material delivers no-slip, no-slide, driving confidence no matter what the road brings.
- UniEdge™ creates a wall around the center channel that funnels mud, snow and other liquids into the recessed ribs—containing the mess, until you can yank, dump, wash and repeat.
- Our exclusive StayPut Cleats™ help keep your liner from shifting around underfoot like lesser liners.
- When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem, we’ll replace it.
- Proudly made in the USA.
- It's unbeatable Husky durability, custom fit to your vehicle, built for a lifetime of abuse. Its DuraGrip™ material stands up to harsh chemicals, while its UniEdge™ and center channel keep mud, snow and liquids contained, until you're ready to remove, wash and hit the road. Its StayPut Cleats™ keep it firmly anchored underfoot, and all Husky Heavy Duty floor mats mats are guaranteed for life. Found on the floors of the toughest trucks, vans and SUVs on earth.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2004 - Pontiac Grand Prix | Front | United States |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2004 - Pontiac Grand Prix | V | 3800 | 6 Cyl 3.8L | 4 | Supercharged | 231 |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Pontiac Grand Prix | V | 3800 | Upper | 6 Cyl 3.8L | 2 | Naturally Aspirated | 231 |
Showing 1 - 10 of 19 products
Loading...