Shop By Product Matching "280"
Image
Product
Price
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Chevrolet Uplander |
- Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Uplander AW
- TOR Front Suspension Control Arm Assembly And Tie Rod End Kit For 2005-2006 Chevrolet Uplander Buick Terraza Saturn Relay AWD - Left Right Side (Driver Passenger) KTR-102806
- TOR
- Product Attributes:
- WebNameEbay4: For Chevrolet Uplander Awd Front Suspension Control Arm Assembly Tie Rod End Kit
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Control Arm And Ball Joint Assembly, 2x Tor Steering Tie Rod End
- ComponentsSummaryShort: 2x Control Arm W/ Ball Joint 2x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Lower Tor Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Tor Steering Tie Rod End (both Side)
- WebNamePlain: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit Ktr-102806
- ComponentsSummaryShortWithBrands: 2x Tor Control Arm W/ Ball Joint 2x Tor Tie Rod End
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Lower Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Steering Tie Rod End (both Side)
- WebNameLong: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For 2005-2006 Chevrolet Uplander Buick Terraza Saturn Relay Awd - Left Right Side (driver Passenger) Ktr-102806
- WebNameShort: Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Uplander Buick Saturn Ktr-102806
- ComponentsSummaryRegular: 2x Suspension Control Arm And Ball Joint Assembly, 2x Steering Tie Rod End
- WebNameRegular: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For 2005-2006 Chevrolet Uplander Buick Terraza Saturn Relay Awd - Left Right Side (driver Passenger) Ktr-102806
- WebNameEbay2: [front] Suspension Control Arm Assembly & Tie Rod End Kit For Chevrolet Uplander
- WebNameEbay3: Suspension Control Arm Assembly Tie Rod End Front Kit For Chevrolet Uplander Awd
- WebNameEbay: Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Uplander Awd
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
- Kit Variations: KTR-100447 KTR-102925
- Part Reference Numbers : BK80539 CB90023PR CB92063PR CB90023 CB92063 MS20329 GS20329 CMS20329 CK620675 CK80539 K620675 K80539 RK620675 RK80539 192302 2605586 TK620675 TK80539 BK80538 CB90024PR CB92064PR CB90024 CB92064 MS20328 GS20328 CMS2
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
182302, 192302, 21100023, 21100024, 2605586, 2605587, 2693043, 2693121, 401-1705, 401-1784, 507-1358, 507-1359, 520-145, 520-146, 520-155, 520-156, 520-165, 520-166...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Chevrolet Uplander | Front | AWD |
- Front Bearing Lower Ball Joint Link Kit For Chevrolet Impala Buick Pontiac Gran
- Transit Auto Front Bearing Lower Ball Joint Link Kit For Chevrolet Impala Buick Pontiac LaCrosse Montana Century Allure Rendezvous Grand Prix Venture Monte Carlo Regal Oldsmobile Uplander - K7T-109280
- Transit Auto Both Side
- Product Attributes:
- WebNameEbay4: For Chevrolet Impala Buick Pontiac Grand Front Bearing Lower Ball Joint Link Kit
- ComponentsSummaryRegularWithBrands: 2x Kugel Wheel Bearing And Hub Assembly, 2x Tor Suspension Ball Joint, 2x Tor Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: 2x Bearing Hub Assembly 2x Suspension Ball Joint 2x Link Kit
- ComponentsSummaryLongWithBrands: 2x Front Kugel Wheel Bearing And Hub Assembly (both Side) + 2x Front Lower Tor Suspension Ball Joint (both Side) + 2x Front Tor Suspension Stabilizer Bar Link Kit (both Side)
- WebNamePlain: Transit Auto Front Hub Bearing Assembly Suspension Lower Ball Joint And Sway Bar Stabilizer Link Kit K7t-109280
- ComponentsSummaryShortWithBrands: 2x Kugel Bearing Hub Assembly 2x Tor Suspension Ball Joint 2x Tor Link Kit
- NumberOfPieces: 6
- ComponentsSummaryLong: 2x Front Wheel Bearing And Hub Assembly (both Side) + 2x Front Lower Suspension Ball Joint (both Side) + 2x Front Suspension Stabilizer Bar Link Kit (both Side)
- WebNameShort: Front Bearing Lower Ball Joint Link Kit For Chevrolet Impala Buick Pontiac Lacrosse Grand K7t-109280
- ComponentsSummaryRegular: 2x Wheel Bearing And Hub Assembly, 2x Suspension Ball Joint, 2x Suspension Stabilizer Bar Link Kit
- WebNameRegular: Transit Auto Front Bearing Lower Ball Joint Link Kit For Chevrolet Impala Buick Pontiac Lacrosse Montana Century Allure Rendezvous Grand Prix Venture Monte Carlo Regal Oldsmobile Uplander - K7t-109280
- WebNameEbay2: [front] Hub Bearing Lower Ball Joint Link Kit For Chevrolet Impala Buick Pontiac
- WebNameEbay3: Bearing Lower Ball Joint Link Front Kit For Chevrolet Impala Buick Pontiac Grand
- WebNameEbay: Front Bearing Lower Ball Joint Link Kit For Chevrolet Impala Buick Pontiac Grand
-
Features:
- Core made of High-Carbon AISI 52100 Chromium Alloy Steel features higher wear resistance, fatigue strength and steel hardness
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium quality MolyPro™ NLGI Grade 2 Molybdenum Grease (MoS2) to minimize wear and reduce friction providing longer lasting performance
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- Exclusive multi-lip seals are made with ProSeal™ Nitrile Rubber (NBR) which can successfully function at high delta of temperatures while retaining its flexibility and sealing performance
- Kit Includes: 2x Front Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Lower TOR Suspension Ball Joint (Both Side) + 2x Front TOR Suspension Stabilizer Bar Link Kit (Both Side)
- Kit Variations: K77-100945 K77-102183 K7T-102098
- Part Reference Numbers : WE60702 WH513121 WH513121N WH513179 104121 H513187 H513121 H513179 513187 513199 513121 513179 BR930148 BR930548 BR930548K 513121S TRB-513121 BK5331 BJ90815XL BJ92105PR BJ90815PR BJ92105XL B5331 BJ90815 BJ92105 GK5
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Chevrolet Uplander | Front | AWD |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Chevrolet Uplander |
- 1 Piece Bushing Original Design
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10260991, 12800, 1403005, 45G9298, 602.66050, FB718, GK6715, JBU736, K6715, MK6715, TD4106W
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Chevrolet Uplander | Front Lower Rearward |
- W/Aux. Heater; Cut to Length, 15"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Chevrolet Uplander | V | - | Tee-1 To Pipe-1 | GAS | 6 Cyl 3.5L | 213 |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Chevrolet Uplander | V | - | 6 Cyl 3.5L | 213 |
- W/Rear A.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2301
- 90.595
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2287
- 90.03
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0019931796, 0089978892, 0129971092, 0129971192, 06E903137AA, 078903137C, 10185656, 10187656, 1060900, 12587999, 14-0599-4, 1854733, 207383, 25-060900, 276908, 2906629000, 3239595, 406-0900...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Chevrolet Uplander | V | - | GAS | 6 Cyl 3.5L | 213 |
- 24" TRICO NeoForm Beam Blade
- Upgrade Option from Conventional Blade to Beam Blade this is a 24'' 9 x 3 Hook Beam Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4 Side Lock
- TRICO NeoForm Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Blade Material: Natural Rubber
- AAP_UDA_121: Y
- AAP_UDA_4: 110
- AAP_UDA_122: Y
- AAP_UDA_123: N
- Engine Specific: N
- AAP_UDA_124: N
- ASIN Parent: B07gxctd52
- AAP_UDA_120: Y
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- Blade Design: Memory Curve Steel Beam
- AAP_UDA_126: N
- AAP_UDA_127: N
- AAP_UDA_128: N
- Adapter Type: Pre-attached Adapter
- AAP_UDA_33: 05070176
- Adapters Required: Yes
- Snowmobile: N
- AAP_UDA_32: Tne
- AAP_UDA_31: 326
- Shipping Exclusions: N
- High Performance: Y
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Non-Vehicle Specific: N
- Aggric Equipment: N
- Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: No
- Small Engine: N
- AAP_UDA_22: 1
- Wiper Element Formulation: All-weather Rubber
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Marine: N
- Is Item A Chemical: No
- Blade Type: Beam
- AAP_UDA_12: Ea
- Car or Light Truck: Y
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- ASIN Child: B001baeth8
- Attached Spoiler/Aerofoil: Yes
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Motorcycle ATV: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Industrial Off Highway Equip: N
-
Features:
- Premium Performance Beam Blade
- Your Vehicle-Specific Adaptor Already Pre-Attached For Easy Installation
- Extreme, all weather durability
- All-Weather, premium beam blade with Memory Curve Steel for uniform pressure and greater performance.
- Exclusive Dual-Point coupler helps eliminate streaking
- There is no wiper blade with such high-quality that is easier to install than a TRICO NeoForm blade. No extra adaptors, no guessing, way less hassle and still a superior premium beam blade. Designed with the DIY person in mind.
This Part Fits the Following OEM/Substitute Numbers:
16-240, 161-1324, 19162962, 24A, 5079280-2, 62443, 8-9924, 900-24-1B, 900-24-2B, WW-2401-PF
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Chevrolet Uplander | Front Left |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Chevrolet Uplander | V | - | Upper | 6 Cyl 3.5L | 213 |
Showing 1 - 10 of 23 products
Loading...