Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Straight Connection
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2007 - Audi A4 Quattro | Avant |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Audi A4 Quattro | V | 3123 | 6 Cyl 3.2L | - |
- From Pressure Regulator Valve to Oil Filter Bracket
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Audi A4 Quattro | L | 1984 | 4 Cyl 2.0L | 121 |
- From Pressure Regulator Valve to Oil Filter Bracket
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Audi A4 Quattro | L | 1984 | 4 Cyl 2.0L | 121 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Trunk Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2007 - Audi A4 Quattro | Avant |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with 23 Bolt Pan
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Audi A4 Quattro |
- OE MFR of Oxygen Sensors
- Actual OE Oxygen Sensor
- Product Attributes:
- Prop 65 Warning Label Required?: No
- Connector Gender: Male
- Grade Type: Regular
- Wiring Harness Length: 45.2755905511811
- Automotive Item Weight (lbs): 0.423288 Lb
- Heated: Yes
- Connector Shape: Oblong
- Hex Size (Oxygen Sensor): 22 Mm
- Terminal Quantity: 6
- Sensor Type: Heated
- Oxygen Sensor Type: Wide Band
- Wiring Harness Included: Yes
- Terminal Type: Blade
- Thread Diameter: 18
- Terminal Gender: Male
- Automotive Color / Finish: Steel
- Mounting Type: Threaded
- Length (Sealing Surface To End Of Connector): 47.4409448818898 In
- Wire Quantity: 5
-
Features:
- Advanced Wideband sensing element for exact air/fuel measurement
- Robust sensor design increases sensor longevity
- Seared protection tube due to 100% functional quality test
- True Direct-fit OE connectors and harness
- Recommend to use OTC 6500 Flexihead O2 Sensor Wrench
- Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
This Part Fits the Following OEM/Substitute Numbers:
06A906262BK, 07C906262CF, 07C906262CG, 1K0998262N
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Audi A4 Quattro | L | 1984 | Upstream | 4 Cyl 2.0L | 121 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Audi A4 Quattro |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 17171 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2r
- Average Rated Life: 200
- Voltage: 12.000
- Wattage: 5.000
- Filament Quantity: 1
- Amperage Rating: 0.420
- Brightness: 4.000
- Bulb Base Type: Ba15s
- Bulb Type: Miniature Lamp B-6
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
12821, 12821CP, 13505779, 13505782, 1620798, 17171, 181747, 3303848, 3313508, 33310594601, 34905965003, 34910504003, 5007, 5007L, 5GJ847440000, 600000000004, 60777130, 63218372577...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Audi A4 Quattro |
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- 90 Degree Swivel Fitting Kit Included
- Product Attributes:
- BTU's Per Hour: 20000
- Mounting: 12-1/4 X 2-7/8
- Depth: 2
-
Features:
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- With our top of the line 10 Row Stack Plate cooler, 90 Degree Swivel Fitting, this highly efficient kit extends transmission life by preventing heat-related transmission failures while also improving shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Audi A4 Quattro | V | 3123 | Automatic | United States | 6 Cyl 3.2L | - |
Showing 1 - 10 of 22 products
Loading...