Shop By Product Matching "280"
Choose your Submodel for your 2007 BMW Z4
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 22.2 X 27mm
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - BMW Z4 | L | 2996 | 6 Cyl 3.0L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Bellows Set of 2
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - BMW Z4 | Front | Coupe 3.0si |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - BMW Z4 |
- Premium Remanufactured
- Product Attributes:
- New or Remanufactured: Remanufactured
- Power Rating: 1.2
- Prop 65 Y/N: Y
- Nose Cone Type: Closed Nose
- Prop 65 Warning: Warning: Cancer And Reproductive Harm
- Rotation Direction: Clockwise
This Part Fits the Following OEM/Substitute Numbers:
0-001-107-423, 0-001-107-424, 12-41-2-354-701, 12-41-7-521-116, 12-41-7-521-122, 12-41-7-521-123, 12-41-7-526-236, 428000-1760
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - BMW Z4 | L | 2996 | 6 Cyl 3.0L | - |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 921 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2r
- Average Rated Life: 1000
- Voltage: 12.800
- Wattage: 17.920
- Filament Quantity: 1
- Amperage Rating: 1.400
- Brightness: 21.000
- Bulb Base Type: Wedge
- Bulb Type: T-5 Bulb 5/8 (16mm) Dia
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
12450313, 2150951, 26717-7Z000, 267177Z000, 90981-11059, 9098111059, 921, 921CP, C2D12972, E6DZ13466B, L000921E
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - BMW Z4 |
- Autolite 4162 Copper Spark Plug
- OE Style; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.106
- 2.69
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.25
- 6.35
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.028
- 0.71
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 11/16
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.418
- 10.62
- Manufacturer Heat Range: 15
- Resistance: 5000
- Insulator Height:
- 2.082
- 52.88
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - BMW Z4 | L | 3246 | 6 Cyl 3.2L | - |
- Autolite 4162 Copper Spark Plug
- Gap .040 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.106
- 2.69
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.25
- 6.35
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.028
- 0.71
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 11/16
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.418
- 10.62
- Manufacturer Heat Range: 15
- Resistance: 5000
- Insulator Height:
- 2.082
- 52.88
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
10R12, 10R12A, 12 12 0 022 902, 12-12-7-690-603, 1230, 4108, 8809, 905, B7EB-11, D9EA, DCPR8E, DCPR8E SOLID, DCPR8EKP, DCPR8EVX, DCPR9E, DP9EA-9, DP9EVX-9, DPR9EA-9...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - BMW Z4 | L | 3246 | 6 Cyl 3.2L | - |
- Dorman Multi-Fit (Dual Freq) Programmable Tire Pressure Monitoring System Sensor
- Sensor Only; 433 MHz Requires MULTi-FIT Programming Tool
- Product Attributes:
- Attachment Type:
- Clamp-in
- Con Grampa
- Valve Length: 2.21
- Frequency:
- 315 Mhz
- 315 Mhz Y 433 Mhz
- 433 Mhz
- Contenidos del paquete: 1 Sensor Del Monitor De Presión Para Neumáticos
- Valve Color:
- Plateado
- Silver
- Power Source:
- Batería
- Battery
- Attachment Type:
-
Features:
- Versatile replacement - this dual-frequency programmable TPMS sensor can replace a failed sensor on vehicles with tire pressure monitoring systems that operate on both 315 MHz and 433MHz frequencies
- Programming required - easily calibrate this sensor with a Dorman MULTi-FIT II tool (sold separately, part number 974-505) by vehicle specifications or by cloning it to match the sensor it's replacing
- Direct replacement - this sensor is engineered to match the fit and function of original equipment wheels and tires, and many, but not all aftermarket wheels and tires
- check fit before installing
- Premium quality - communicating proper tire pressure is critical, and this sensor is backed by a brand with more than a century of engineering excellence and quality, with a warranty you can trust
- This dual-frequency Dorman MULTi-FIT TPMS sensor covers 95% of the vehicles on the road today, including European models not covered in many competitors' TPMS programs. Using our 974-505 MULTi-FIT II tool, the sensor can be programmed for both 315MHz and 433MHz applications on specified vehicles. The MULTi-FIT II tool can precisely and rapidly calibrate this sensor by vehicle specifications or clone it to match the sensor it's replacing. The versatility, ease of installation and unrivaled range of vehicle coverage makes this sensor the perfect single-source repair solution. Manufactured by a brand known for more than a century for engineering excellence and quality assurance, you can install it with confidence, knowing it's backed by a warranty you can trust. (MULTi-FIT II tool sold separately; part number 974-505).
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0008223306, 0008223406, 0009057200, 0025400217, 0025407917, 0025408017, 0025409517, 0035400217, 06421S3VA00, 06421S3VA04, 06421S9VA00, 06421S9VA01, 06421S9VA02, 06421S9VA03, 06421SCV305, 06421SCVA00, 10394110, 10438853...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - BMW Z4 |
- Dorman MULTi-FIT (433) Programmable Tire Pressure Monitoring System Sensor
- Sensor Only; 433 MHz Requires MULTi-FIT Programming Tool Sell Until Depleted
- Product Attributes:
- Frequency:
- 433 Mhz
- 433mhz
- Contenidos del paquete:
- 1 Sensor Del Sistema De Monitoreo De Presión De La Llanta Programable
- 1 Tornillo De Montaje
- 1 Válvula De Sujeción Completa
- Frequency:
-
Features:
- Versatile replacement - this programmable TPMS sensor can replace the factory sensor on vehicles with tire pressure monitoring systems that operate on 433 MHz frequency
- Programming required - this sensor must be cloned to match the original sensor or calibrated to vehicle specification using the MULTi-FIT II programming tool (sold separately
- part number 974-505)
- Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This programmable 433 MHz TPMS sensor matches the function of the original sensor on a variety of specified vehicles. Using the Dorman MULTi-FIT II programming tool, it can be calibrated by vehicle specification or can be cloned to match the sensor it's replacing. Each one is made of quality materials and engineered for durability. (MULTi-FIT II tool sold separately; part number 974-505)
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0008223306, 0009057200, 0025400217, 0025408017, 0025409517, 0035400217, 13172567, 13227143, 24437708, 31280296, 31280297, 31302096, 31341893, 31445474, 36106790054, 36106856227, 36106874829, 36118378682...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - BMW Z4 |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 70
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 26
- Material: Thermoplastic
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
This Part Fits the Following OEM/Substitute Numbers:
04854089A, 06A903315D, 06A903315E, 06A903315F, 11281439062, 11287503427, 11287515866, 11287515867, 166200V010, 1662036030, 19189978, 1F2015980, 1L5Q 6A228 AB, 1L5Z 6B209 A, 1L5Z 6B209 AA, 231033, 231144, 23770AA05A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - BMW Z4 | L | 2996 | GAS | 6 Cyl 3.0L | - |
Showing 1 - 10 of 23 products
Loading...