Image
Product
Price
- Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Impala Buic
- TOR Front Suspension Control Arm Assembly And Tie Rod End Kit For Chevrolet Impala Buick LaCrosse Pontiac Grand Prix Century Allure Monte Carlo Regal Oldsmobile Intrigue Limited Left Right KTR-102807
- TOR
- Product Attributes:
- WebNameEbay4: For Chevrolet Impala Buick Front Suspension Control Arm Assembly Tie Rod End Kit
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Control Arm And Ball Joint Assembly, 2x Tor Steering Tie Rod End
- ComponentsSummaryShort: 2x Control Arm W/ Ball Joint 2x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Lower Tor Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Tor Steering Tie Rod End (both Side)
- WebNamePlain: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit Ktr-102807
- ComponentsSummaryShortWithBrands: 2x Tor Control Arm W/ Ball Joint 2x Tor Tie Rod End
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Lower Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Outer Steering Tie Rod End (both Side)
- WebNameLong: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Century Allure Monte Carlo Regal Oldsmobile Intrigue Limited - Left Right Side (driver Passenger) Ktr-102807
- WebNameShort: Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Impala Buick Lacrosse Ktr-102807
- ComponentsSummaryRegular: 2x Suspension Control Arm And Ball Joint Assembly, 2x Steering Tie Rod End
- WebNameRegular: Tor Front Suspension Control Arm Assembly And Tie Rod End Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Century Allure Monte Carlo Regal Oldsmobile Intrigue Limited Left Right Ktr-102807
- WebNameEbay2: [front] Suspension Control Arm Assembly And Tie Rod End Kit For Chevrolet Impala
- WebNameEbay3: Suspension Control Arm Assembly Tie Rod End Front Kit For Chevrolet Impala Buick
- WebNameEbay: Front Suspension Control Arm Assembly Tie Rod End Kit For Chevrolet Impala Buick
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
- Kit Variations: KTR-102926
- Part Reference Numbers : BK80539 CB90023PR CB92063PR CB90023 CB92063 MS20329 GS20329 CMS20329 CK620675 CK80539 K620675 K80539 RK620675 RK80539 192302 2605586 TK620675 TK80539 BK80538 CB90024PR CB92064PR CB90024 CB92064 MS20328 GS20328 CMS2
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
182302, 192302, 21100023, 21100024, 2605586, 2605587, 2693045, 401-1707, 507-1358, 507-1359, 520-145, 520-146, 520-155, 520-156, 520-165, 520-166, 534-605, 89100034...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Pontiac Grand Prix | Front |
- Rear Strut And Spring Kit For Chevrolet Impala Buick LaCrosse Pontiac Grand Pri
- Excludes 17" and 18" Wheels, Police and Taxi
- Transit Auto Rear Complete Suspension Shocks Strut And Coil Spring Mount Assemblies Kit For Chevrolet Impala Buick LaCrosse Pontiac Grand Prix Allure Excludes 17" 18" Wheels Police Taxi - K78A-100280
- Transit Auto
- Product Attributes:
- WebNameEbay4: For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Rear Strut And Spring Kit
- ComponentsSummaryRegularWithBrands: 2x Unity Automotive Suspension Strut And Coil Spring Assembly
- ComponentsSummaryShort: 2x Complete Strut
- ComponentsSummaryLongWithBrands: 2x Rear Unity Automotive Suspension Strut And Coil Spring Assembly (both Side)
- WebNamePlain: Transit Auto Rear Complete Suspension Shocks Strut And Coil Spring Mount Assemblies Kit K78a-100280
- ComponentsSummaryShortWithBrands: 2x Unity Complete Strut
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Rear Suspension Strut And Coil Spring Assembly (both Side)
- WebNameLong: Transit Auto Rear Complete Suspension Shocks Strut And Coil Spring Mount Assemblies Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Allure Excludes 17" 18" Wheels Police Taxi - Left Right Side (driver Passenger) K78a-100280
- WebNameShort: Rear Strut Coil Spring Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Allure K78a-100280
- ComponentsSummaryRegular: 2x Suspension Strut And Coil Spring Assembly
- WebNameRegular: Transit Auto Rear Complete Suspension Shocks Strut And Coil Spring Mount Assemblies Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix Allure Excludes 17" 18" Wheels Police Taxi - K78a-100280
- WebNameEbay2: [rear] Strut & Spring Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix
- WebNameEbay3: Strut And Spring Rear Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix
- WebNameEbay: Rear Strut And Spring Kit For Chevrolet Impala Buick Lacrosse Pontiac Grand Prix
-
Features:
- Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle's weight
- Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- Premium upper strut mount helps ensure smooth, "like-new" steering precision and prevents noise, vibration, harshness and memory steer
- Kit Includes: 2x Rear Unity Automotive Suspension Strut and Coil Spring Assembly (Both Side)
- Kit Variations: KSS-104207 KSS-104256
- Part Reference Numbers : 1332347L 2332304L 3332304L G56924 810215 SR4093 271662 281662 371662 381662 471662 481662 271662L 281662L 371662L 381662L 471662L 481662L 90101079L 811282 V271662L 15311 W1332347L 1332347R 2332304R 3332304R G56925
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
1332347, 1332347L, 1332347R, 15311, 15312, 2332304, 2332304L, 2332304R, 271662, 271662L, 271662R, 281662, 281662L, 281662R, 3332304, 3332304L, 3332304R, 371662...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Pontiac Grand Prix | Rear |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Pontiac Grand Prix |
- FRAM, TG10060, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Premium
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Silicone anti-drain back valve helps ensure safe engine start up
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-0841, 041-0852, 04892339AA, 10060, 12626224, 16510-78J00, 16510-78J01, 19303975, 1AMFL00008, 2-94561-109-0, 27060, 28004, 3334, 37060, 47060, 47060T, 4884900AB, 4892339AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Pontiac Grand Prix | V | 5328 | 8 Cyl 5.3L | 325 |
- Engine Oil Pressure Sensor With Filter
- Packaging Type: Box
- Product Attributes:
- Color/Finish:
- Black
- Negro
- Plata
- Silver
- Connector Gender:
- Macho
- Male
- Wire Harness Included:
- No
- Non
- Connector Color:
- Black
- Negro
- Noir
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Contenidos del paquete: 1 Sensor De Presión Del Aceite Del Motor
- Connector Shape:
- Redondo
- Round
- Terminal Gender:
- Macho
- Male
- Terminal Quantity: 3
- Cable Material:
- Metal
- Plastic
- Cableado incluido: No
- Color/Finish:
-
Features:
- Direct replacement - this engine oil pressure sensor is designed to match the fit and function of an original sensor on specified vehicles
- Ideal solution - engineered to help accurately monitor oil pressure when an original sensor has failed from heat or internal component damage
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil pressure sensor is designed to match the function of an original sensor on specified vehicles. It is engineered to help accurately monitor oil pressure when an original sensor has failed from heat or internal component damage.
This Part Fits the Following OEM/Substitute Numbers:
12556117, 12559780, 12562230, 12573107, 12585328, 12614969, 12616646, 12677836, 1S6713, 2-80014, 2OPS0031, 6T6, D1846A, OP6196, OP6196SB, PS308, PS308T, PS340...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Pontiac Grand Prix | V | 5328 | 8 Cyl 5.3L | 325 |
- 1 Piece Bushing Original Design
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10260991, 12800, 1403005, 45G9298, 602.66050, FB718, GK6715, JBU736, K6715, MK6715, TD4106W
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Pontiac Grand Prix | Front Lower Rearward |
- Smooth Pulley
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 90
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 30
- Material: Steel
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04536154, 04536154AB, 06003045, 06004123, 06004127, 10000400, 10042806, 10044970, 10069964, 10070000, 10078911, 10114908, 10115478, 10115874, 10124631, 10129518, 10129558, 10129559...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Pontiac Grand Prix | V | 3800 | Supercharger | GAS | 6 Cyl 3.8L | 231 |
- Product Attributes:
- :
- 28.3
- 70
- Groove Quantity: 6
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Number of Bearings: 1
- Flat: N
- Material: Polymer
- Belt Type: Serpentine
- :
This Part Fits the Following OEM/Substitute Numbers:
10239930, 12555423, 12555424, 12556612, 12559325, 12569301, 12580772, 12580774, 17530-54L10, 231015, 2N1Q-19A216-BD, 2N1Z-8678-BA, 2N1Z-8678-BD, 36326, 38008, 3M4E-6C348-CB, 3M4Z-6C348-CA, 419-604...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Pontiac Grand Prix | V | 5328 | 8 Cyl 5.3L | 325 |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2007 - Pontiac Grand Prix | V | 3800 | 6 Cyl 3.8L | 4 | Supercharged | 231 |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2007 - Pontiac Grand Prix | V | 3800 | Upper | 6 Cyl 3.8L | 2 | Naturally Aspirated | 231 |
Showing 1 - 10 of 25 products
Loading...