Shop By Product Matching "280"
Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Chrysler Crossfire |
- 9005/90006/9012/H10;Fix Canbus and PWM Error
- All in one harness to fix CANBus and PWM errors for any LED headlight and fog light conversion
- Product Attributes:
- IP Rating: Ip67
- Prop 65 Warning Label:
- Warning - Both Cancer And Reproduction.jpg
- Warning - Both Cancer And Reproduction.tif
- Power: 6.5w
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
- Current: 0.5a At 13v
-
Features:
- Error cancelling wiring harness for vehicles equipped with CANBus and PWM system.
- Eliminates flickering, on and off flash, and dashboard warning lights and other vehicle electrical system complications.
- For use with LED headlight bulbs. Developed for upgrading LED headlight bulbs into the headlight and fog light of vehicles that operate with CANBUS / PWM technology. Simply plug and play installation to prevent bulb out warnings or flickering.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler Crossfire | Front |
- Front Left Upper Suspension Control Arm Ball Joint Assembly For Mercedes-Benz
- TOR Front Left (Driver Side) Upper Suspension Control Arm Ball Joint Assembly TOR-CK90423 For Mercedes-Benz Chrysler Crossfire E320 CLK320 C230 CLK430 SLK320 SLK230 C280 C220 E430 CLK55 AMG E55 SLK32
- TOR
- Product Attributes:
- WebNameEbay4: For E320 Front Left Upper Suspension Control Arm Ball Joint Assembly Tor-ck90423
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryShort: Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryLongWithBrands: 1x Front Left Upper Tor Suspension Control Arm And Ball Joint Assembly
- WebNamePlain: Tor Front Left (driver Side) Upper Suspension Control Arm Ball Joint Assembly Tor-ck90423
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm And Ball Joint Assembly
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Left Upper Suspension Control Arm And Ball Joint Assembly
- WebNameLong: Tor Front Left (driver Side) Upper Suspension Control Arm Ball Joint Assembly Tor-ck90423 For Mercedes-benz Chrysler Crossfire E320 Clk320 C230 Clk430 Slk320 Slk230 C280 C220 E430 Clk55 Amg E55 Slk32 E420 C43 C36
- WebNameShort: Front Left Upper Suspension Control Arm Ball Joint Assembly Tor-ck90423 For Mercedes-benz Chrysler
- ComponentsSummaryRegular: Suspension Control Arm And Ball Joint Assembly
- WebNameRegular: Tor Front Left (driver Side) Upper Suspension Control Arm Ball Joint Assembly Tor-ck90423 For Mercedes-benz Chrysler Crossfire E320 Clk320 C230 Clk430 Slk320 Slk230 C280 C220 E430 Clk55 Amg E55 Slk32
- WebNameEbay2: [front Left Upper] Suspension Control Arm Ball Joint Assembly Tor-ck90423 For
- WebNameEbay3: Suspension Control Arm Ball Joint Assembly Front Left Upper Tor-ck90423 For E320
- WebNameEbay: Front Left Upper Suspension Control Arm Ball Joint Assembly For Mercedes-benz
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK90423 CB28017PR CB28017 MK90423 GK90423 CMK90423 CK90423 K90423 RK90423 32409 2605271 TK90423
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
10936, 2023304807, 21540001, 2605271, 32409, 502-1096, 521-295, CB28017, CB28017PR, CK90423, CMK90423, GK90423, JTC983, K90423, MK90423, RK90423, TK90423
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler Crossfire | Front Left Upper |
- Front Upper Control Arm Lower Ball Joint Kit For Mercedes-Benz Chrysler E320 AM
- TOR Front Suspension Upper Control Arms And Lower Ball Joints Kit For Mercedes-Benz Chrysler Crossfire E320 CLK320 C230 CLK430 SLK320 SLK230 C280 C220 E430 CLK55 AMG E55 SLK32 E420 C43 C36 KTR-103406
- TOR
- Product Attributes:
- WebNameEbay4: For Mercedes-benz Chrysler E320 Amg Front Upper Control Arm Lower Ball Joint Kit
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Control Arm And Ball Joint Assembly, 2x Tor Suspension Ball Joint
- ComponentsSummaryShort: 2x Control Arm W/ Ball Joint 2x Suspension Ball Joint
- ComponentsSummaryLongWithBrands: 2x Front Upper Tor Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Lower Tor Suspension Ball Joint (both Side)
- WebNamePlain: Tor Front Suspension Upper Control Arms And Lower Ball Joints Kit Ktr-103406
- ComponentsSummaryShortWithBrands: 2x Tor Control Arm W/ Ball Joint 2x Tor Suspension Ball Joint
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Upper Suspension Control Arm And Ball Joint Assembly (both Side) + 2x Front Lower Suspension Ball Joint (both Side)
- WebNameLong: Tor Front Suspension Upper Control Arms And Lower Ball Joints Kit For Mercedes-benz Chrysler Crossfire E320 Clk320 C230 Clk430 Slk320 Slk230 C280 C220 E430 Clk55 Amg E55 Slk32 E420 C43 C36 - Left Right Side (driver Passenger) Ktr-103406
- WebNameShort: Front Upper Control Arm & Lower Ball Joints Kit For Mercedes-benz Chrysler Crossfire E320 Ktr-103406
- ComponentsSummaryRegular: 2x Suspension Control Arm And Ball Joint Assembly, 2x Suspension Ball Joint
- WebNameRegular: Tor Front Suspension Upper Control Arms And Lower Ball Joints Kit For Mercedes-benz Chrysler Crossfire E320 Clk320 C230 Clk430 Slk320 Slk230 C280 C220 E430 Clk55 Amg E55 Slk32 E420 C43 C36 Ktr-103406
- WebNameEbay2: [front] Upper Control Arm & Lower Ball Joint Kit For Mercedes-benz Chrysler E320
- WebNameEbay3: Upper Control Arm Lower Ball Joint Front Kit For Mercedes-benz Chrysler E320 Amg
- WebNameEbay: Front Upper Control Arm Lower Ball Joint Kit For Mercedes-benz Chrysler E320 Amg
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Kit Includes: 2x Front Upper Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Lower Suspension Ball Joint (Both Side)
- Kit Variations: KTR-101531
- Part Reference Numbers : BK90423 CB28017PR CB28017 MK90423 GK90423 CMK90423 CK90423 K90423 RK90423 32409 2605271 TK90423 BK90422 CB28018PR CB28018 MK90422 GK90422 CMK90422 CK90422 K90422 RK90422 122409 2605270 TK90422 BK9918 B9918PR B9918X
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
104209, 10935, 10936, 122409, 2023304807, 2023304907, 2103300035, 21540001, 21540002, 2601496, 2605270, 2605271, 32409, 502-1095, 502-1096, 505-1250, 521-295, 521-296...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler Crossfire | Front |
- Front Suspension Control Arm Ball Joint Kit For Mercedes-Benz Chrysler Crossfir
- TOR Front Suspension Control Arm And Ball Joint Assembly Kit For Mercedes-Benz Chrysler Crossfire E320 CLK320 C230 CLK430 SLK320 SLK230 C280 C220 E430 CLK55 AMG E55 SLK32 E420 C43 C36 - KTR-101531
- TOR
- Product Attributes:
- WebNameEbay4: For Mercedes-benz Chrysler Crossfire Front Suspension Control Arm Ball Joint Kit
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryShort: 2x Control Arm W/ Ball Joint
- ComponentsSummaryLongWithBrands: 2x Front Upper Tor Suspension Control Arm And Ball Joint Assembly (both Side)
- WebNamePlain: Tor Front Suspension Control Arm And Ball Joint Assembly Kit Ktr-101531
- ComponentsSummaryShortWithBrands: 2x Tor Control Arm W/ Ball Joint
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Front Upper Suspension Control Arm And Ball Joint Assembly (both Side)
- WebNameLong: Tor Front Suspension Control Arm And Ball Joint Assembly Kit For Mercedes-benz Chrysler Crossfire E320 Clk320 C230 Clk430 Slk320 Slk230 C280 C220 E430 Clk55 Amg E55 Slk32 E420 C43 C36 - Left Right Side (driver Passenger) Ktr-101531
- WebNameShort: Front Suspension Control Arm Ball Joint Kit For Mercedes-benz Chrysler Crossfire E320 Amg Ktr-101531
- ComponentsSummaryRegular: 2x Suspension Control Arm And Ball Joint Assembly
- WebNameRegular: Tor Front Suspension Control Arm And Ball Joint Assembly Kit For Mercedes-benz Chrysler Crossfire E320 Clk320 C230 Clk430 Slk320 Slk230 C280 C220 E430 Clk55 Amg E55 Slk32 E420 C43 C36 - Ktr-101531
- WebNameEbay2: [front] Suspension Control Arm & Ball Joint Kit For Mercedes-benz Chrysler E320
- WebNameEbay3: Suspension Control Arm Ball Joint Front Kit For Mercedes-benz Chrysler Crossfire
- WebNameEbay: Front Suspension Control Arm Ball Joint Kit For Mercedes-benz Chrysler Crossfire
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Kit Includes: 2x Front Upper Suspension Control Arm and Ball Joint Assembly (Both Side)
- Kit Variations: KTR-103406
- Part Reference Numbers : BK90423 CB28017PR CB28017 MK90423 GK90423 CMK90423 CK90423 K90423 RK90423 32409 2605271 TK90423 BK90422 CB28018PR CB28018 MK90422 GK90422 CMK90422 CK90422 K90422 RK90422 122409 2605270 TK90422
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
10935, 10936, 122409, 2023304807, 2023304907, 21540001, 21540002, 2605270, 2605271, 32409, 502-1095, 502-1096, 521-295, 521-296, CB28017, CB28018, CK90422, CK90423...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler Crossfire | Front |
- Front Right Upper Suspension Control Arm Ball Joint Assembly For Mercedes-Benz
- TOR Front Right (Passenger Side) Upper Suspension Control Arm Ball Joint Assembly TOR-CK90422 For Mercedes-Benz Chrysler Crossfire E320 CLK320 C230 CLK430 SLK320 SLK230 C280 C220 E430 CLK55 AMG E55
- TOR
- Product Attributes:
- WebNameEbay4: For Amg Front Right Upper Suspension Control Arm Ball Joint Assembly Tor-ck90422
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryShort: Suspension Control Arm And Ball Joint Assembly
- ComponentsSummaryLongWithBrands: 1x Front Right Upper Tor Suspension Control Arm And Ball Joint Assembly
- WebNamePlain: Tor Front Right (passenger Side) Upper Suspension Control Arm Ball Joint Assembly Tor-ck90422
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm And Ball Joint Assembly
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Right Upper Suspension Control Arm And Ball Joint Assembly
- WebNameLong: Tor Front Right (passenger Side) Upper Suspension Control Arm Ball Joint Assembly Tor-ck90422 For Mercedes-benz Chrysler Crossfire E320 Clk320 C230 Clk430 Slk320 Slk230 C280 C220 E430 Clk55 Amg E55 Slk32 E420 C43 C36
- WebNameShort: Front Right Upper Suspension Control Arm Ball Joint Assembly Tor-ck90422 For Mercedes-benz Chrysler
- ComponentsSummaryRegular: Suspension Control Arm And Ball Joint Assembly
- WebNameRegular: Tor Front Right (passenger Side) Upper Suspension Control Arm Ball Joint Assembly Tor-ck90422 For Mercedes-benz Chrysler Crossfire E320 Clk320 C230 Clk430 Slk320 Slk230 C280 C220 E430 Clk55 Amg E55
- WebNameEbay2: [front Right Upper] Suspension Control Arm Ball Joint Assembly Tor-ck90422 For
- WebNameEbay3: Suspension Control Arm Ball Joint Assembly Front Right Upper Tor-ck90422 For Amg
- WebNameEbay: Front Right Upper Suspension Control Arm Ball Joint Assembly For Mercedes-benz
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK90422 CB28018PR CB28018 MK90422 GK90422 CMK90422 CK90422 K90422 RK90422 122409 2605270 TK90422
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
10935, 122409, 2023304907, 21540002, 2605270, 502-1095, 521-296, CB28018, CB28018PR, CK90422, CMK90422, GK90422, JTC982, K90422, MK90422, RK90422, TK90422
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler Crossfire | Front Right Upper |
Showing 1 - 6 of 6 products
Loading...