Shop By Product Matching "280"
Choose your Submodel for your 2008 Dodge Caliber
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Low Note
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Caliber |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Caliber |
- FRAM, TG10060, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Premium
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Silicone anti-drain back valve helps ensure safe engine start up
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-0841, 041-0852, 04892339AA, 10060, 12626224, 16510-78J00, 16510-78J01, 19303975, 1AMFL00008, 2-94561-109-0, 27060, 28004, 3334, 37060, 47060, 47060T, 4884900AB, 4892339AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2008 - Dodge Caliber | L | 2360 | 4 Cyl 2.4L | Naturally Aspirated | 144 |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Caliber | L | 2360 | 4 Cyl 2.4L | 144 |
- with Brake Code BR1
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 15.40
- Grade Type: Premium
- Outer Pad Overall Thickness: 15.40
- Brake System: Akebono
- Brake Lubricant Included: Yes
- Inner Pad Width: 111.50
- Outer Pad Height: 44.90
- Outer Pad Width: 91.10
- Pad Shims Included: Yes
- Inner Pad Height: 44.90
- FMSI Number: 7743-d868
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 1.05
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986424717, 13046058552, 1606294580, 1617265280, 2358202, 425390, 425391, 425448, 4605A265, 4605A487, 68020 256AA, 68020256AA, 68028 671AA, 68028671AA, 68033 078AA, ACT868, ATD868C, D1343 7743...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Dodge Caliber | Rear |
- Uses Stock Bulbs; Pair; w/Switch; w/o Washer; Smoke
- Projector Fog Lights; Uses Stock Bulbs; Pair; w/Switch; w/o Washer; Smoke;
- Projector Fog Lights
- Product Attributes:
- Beam Style: Projection
- Housing Color: Oem
- WARNING CA Proposition 65: Yes
- Application: Automotive
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Chromium (hexavalent Compounds); Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warning.ca.gov
- Quantity Sold: 2
- Bulb Technology: Halogen
- Housing Shape: Oe
-
Features:
- OEM Specific Quality
- Made For Direct Plug-And-Play Fitment
- High Quality Bulbs Included
- These fog lights increase visibility during heavy rain, snow, fog and night time driving. They are designed as direct bolt-on replacement parts and are made by an OE approved and ISO certified manufacturers
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2008 - Dodge Caliber | SRT-4 |
- Uses Stock Bulbs; Pair; w/Switch; w/o Washer; Smoke
- Projector Fog Lights; Uses Stock Bulbs; Pair; w/Switch; w/o Washer; Smoke;
- Projector Fog Lights
- Product Attributes:
- Beam Style: Projection
- Housing Color: Oem
- WARNING CA Proposition 65: Yes
- Application: Automotive
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Chromium (hexavalent Compounds); Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warning.ca.gov
- Quantity Sold: 2
- Bulb Technology: Halogen
- Housing Shape: Oe
-
Features:
- OEM Specific Quality
- Made For Direct Plug-And-Play Fitment
- High Quality Bulbs Included
- These fog lights increase visibility during heavy rain, snow, fog and night time driving. They are designed as direct bolt-on replacement parts and are made by an OE approved and ISO certified manufacturers
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2008 - Dodge Caliber | SRT-4 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2008 - Dodge Caliber | L | 2360 | Converter (Inlet) | 4 Cyl 2.4L | FWD | 144 |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 921 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2r
- Average Rated Life: 1000
- Voltage: 12.800
- Wattage: 17.920
- Filament Quantity: 1
- Amperage Rating: 1.400
- Brightness: 21.000
- Bulb Base Type: Wedge
- Bulb Type: T-5 Bulb 5/8 (16mm) Dia
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
12450313, 2150951, 26717-7Z000, 267177Z000, 90981-11059, 9098111059, 921, 921CP, C2D12972, E6DZ13466B, L000921E
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Caliber |
- Bulb Type H10 Pair
- ProLux Zero Space; Bulb Type H10 Pair;
- ProLux Zero Space
- Product Attributes:
- Industry/OE Number: H10
- WARNING CA Proposition 65: Yes
-
Features:
- Same Great Features As Silver Lux Pro
- Custom Aluminum Tower Design
- Bright White Light Rated At 6000K
- Made In USA
- 3 Year Warranty
- Equal in size to factory halogen bulb and 30% smaller heat sink than standard silver-lux pro. Same great features as silver-lux pro increases light visibility dramatically. Custom aluminum tower designed to correctly position the led behind in the lens. Each lamp includes a cree xhp70 led - with 180 degree beam angle and 6000 lumen output per kit. Bright white light rated at 6000k. Made in usa. 3 year warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Caliber |
Showing 1 - 10 of 21 products
Loading...