Image
Product
Price
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2008 - Dodge Viper | SRT-10 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Viper |
- with 8.5 (in) Ring Gear with Spicer 44 Axle with Independent Carrier Assembly
This Part Fits the Following OEM/Substitute Numbers:
02800484, 0927090, 1160037, 1314773, 153835, 15665236, 15665281, 18435, 2140285, 231340, 2800484, 3172563, 455387C1, 455387C91, 4723145, 566000, 597570C91, 62AX460...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Dodge Viper | Rear Inner |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Viper | V | 8448 | 10 Cyl 8.4L | 515 |
- Autolite XP5263 Iridium XP Spark Plug
- Gap .035 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1119A-78J00-000, 1119A7-8J00, 12597464, 12598004, 12607280, 12611882, 12617309, 12620540, 12622561, 12625058, 12625661, 12681660, 19185438, 41-102, 41-103, 41-105, 41-107, 41-108...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Viper | V | 8448 | 10 Cyl 8.4L | 515 |
- Autolite AI5263 Iridium Ultra Spark Plug
- Gap .035 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12597464, 12598004, 12607280, 12611882, 12622561, 12681660, 19185438, 41-102, 41-103, 41-105, 41-107, 41-108, 41-109, 41-118, 41-990, 6509, 6728, 9300...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Viper | V | 8448 | 10 Cyl 8.4L | 515 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head M14 x 1.50 Thread Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Método de drenaje: Tradicional
- Threads Per Inch: 0
- SAE or Metric:
- Metric
- Métrico
- Magnetic:
- No
- Non
- Thread Pitch: 1.5
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 5.8
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- Gasket
- Junta
- Color:
- Plateado
- Silver
- Socket Points: M6 -1.0
- Head Tool Size: 16 Mm
- Thread Diameter: 14
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Viper | V | 8448 | 10 Cyl 8.4L | 515 |
- Dorman MULTi-FIT (433) Programmable Tire Pressure Monitoring System Sensor
- Sensor Only; 433 MHz Requires MULTi-FIT Programming Tool Sell Until Depleted
- Product Attributes:
- Frequency:
- 433 Mhz
- 433mhz
- Contenidos del paquete:
- 1 Sensor Del Sistema De Monitoreo De Presión De La Llanta Programable
- 1 Tornillo De Montaje
- 1 Válvula De Sujeción Completa
- Frequency:
-
Features:
- Versatile replacement - this programmable TPMS sensor can replace the factory sensor on vehicles with tire pressure monitoring systems that operate on 433 MHz frequency
- Programming required - this sensor must be cloned to match the original sensor or calibrated to vehicle specification using the MULTi-FIT II programming tool (sold separately
- part number 974-505)
- Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This programmable 433 MHz TPMS sensor matches the function of the original sensor on a variety of specified vehicles. Using the Dorman MULTi-FIT II programming tool, it can be calibrated by vehicle specification or can be cloned to match the sensor it's replacing. Each one is made of quality materials and engineered for durability. (MULTi-FIT II tool sold separately; part number 974-505)
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0008223306, 0009057200, 0025400217, 0025408017, 0025409517, 0035400217, 13172567, 13227143, 24437708, 31280296, 31280297, 31302096, 31341893, 31445474, 36106790054, 36106856227, 36106874829, 36118378682...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Viper |
- with 8.5 (in) Ring Gear with Spicer 44 Axle with Independent Carrier Assembly
This Part Fits the Following OEM/Substitute Numbers:
0009808402, 02800485, 04626725, 04746979, 05086780AA, 05086780AB, 05086789AB, 05583609, 0927091, 09418356, 10117880, 1100036, 12479221, 1314774, 15286375, 153834, 15635197, 15665237...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Dodge Viper | Rear Inner |
- Bulb Type H10 Pair
- ProLux Zero Space; Bulb Type H10 Pair;
- ProLux Zero Space
- Product Attributes:
- Industry/OE Number: H10
- WARNING CA Proposition 65: Yes
-
Features:
- Same Great Features As Silver Lux Pro
- Custom Aluminum Tower Design
- Bright White Light Rated At 6000K
- Made In USA
- 3 Year Warranty
- Equal in size to factory halogen bulb and 30% smaller heat sink than standard silver-lux pro. Same great features as silver-lux pro increases light visibility dramatically. Custom aluminum tower designed to correctly position the led behind in the lens. Each lamp includes a cree xhp70 led - with 180 degree beam angle and 6000 lumen output per kit. Bright white light rated at 6000k. Made in usa. 3 year warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Viper |
Showing 1 - 10 of 16 products
Loading...