Shop By Product Matching "280"
Choose your Submodel for your 2008 Land Rover Range Rover Sport
Image
Product
Price
- with Double Locking System
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Land Rover Range Rover Sport | Rear Right |
- with Double Locking System
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Land Rover Range Rover Sport | Rear Right |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Double Locking System
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Land Rover Range Rover Sport | Rear Left |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Double Locking System
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Land Rover Range Rover Sport | Rear Left |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Land Rover Range Rover Sport | V | 4196 | 8 Cyl 4.2L | 256 |
- with Magna Steyr DD295 Transfer Case 2 Speed with Outer Race Width 17mm
This Part Fits the Following OEM/Substitute Numbers:
0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2008 - Land Rover Range Rover Sport | Front Rearward | 4WD |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Land Rover Range Rover Sport |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head M14 x 1.50 Thread Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Método de drenaje: Tradicional
- Threads Per Inch: 0
- SAE or Metric:
- Metric
- Métrico
- Magnetic:
- No
- Non
- Thread Pitch: 1.5
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 5.8
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- Gasket
- Junta
- Color:
- Plateado
- Silver
- Socket Points: M6 -1.0
- Head Tool Size: 16 Mm
- Thread Diameter: 14
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Land Rover Range Rover Sport | V | 4196 | 8 Cyl 4.2L | 256 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Land Rover LR3; LR4; Range Rover
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 8000lbs. Weight Distributing; 800lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13456 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Land Rover LR3; LR4; Range Rover
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 6000
- WD Tongue Weight: 800
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 8000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Land Rover LR3, LR4 and Range Rover (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - Land Rover Range Rover Sport | V | 4394 | Rear | 8 Cyl 4.4L | HSE | - |
- Supersession (ACES) Replaces 20090 Mounting Method: Clamp-in Torque: Nut torque = 71in-lbs, 8Nm; Valve core torque = 3.5 in-lbs, 0.4Nm Max Speed Rating: 130 Max Pressure Rating: 102 Frequency: 433.0 MHz Housing Material: Plastic Without Mounting Hardware Pre-Programmed Not Programmable Valve Not Included Valve Cap Not Included Valve Core Material: Nickel Plated Valve Material: Aluminum Valve Color: Silver Valve Stem Not Included Washer Not Included Includes 1 TPMS sensor with nut Quantity Included: 1
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1044, 312802970, 31302096, 31341171, 31341893, 31414189, 31445473, 31445474, 921190, 974-302, C2D47173, RDE203V21, SE51003, SE51004, SE53000, TPM138
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Land Rover Range Rover Sport |
Showing 1 - 10 of 17 products
Loading...