Shop By Product Matching "280"

Choose your Engine for your 2008 Volvo S60


Showing 1 - 10 of 20 products
Image
SKU
Product
Rating
Price

Victor Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Eng: 2979611-
  • with Valve Seals

Additional Fitment Information:
Vehicle Block CC Engine Range Engine CID
2008 - Volvo S60 L 2521 2979611 and up 5 Cyl 2.5L -
Additional Fitment Information:
Vehicle Position
2008 - Volvo S60 Front Inner

Genuine
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Left

Additional Fitment Information:
Vehicle Position Drive Type
2008 - Volvo S60 Rear Upper AWD

Genuine
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Right

Additional Fitment Information:
Vehicle Position Drive Type
2008 - Volvo S60 Rear Upper AWD

Schrader
  • Schrader EZ-sensor Snap-in
  • Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
  • Programmable for 314.9, 315 and 433MHz Applications
  • Product Attributes:
    • Washer Included: No
    • Mounting Hardware Included: Yes
    • Grommets Included: No
    • Manufacturer Warranty: 2 Years
    • California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
    • Recommended Torque (in/Lbs): 11.5 Inch/lbs.
    • Valve Stem Included: Yes
    • Monitor Type: Direct
    • Real Time Pressure Signal Transmission: Yes
    • Attachment Type:
      • Snap-fit
      • Snap-in
    • Mounting Location: Wheel
    • Valve Stem Material: Rubber
    • Programmed/Programmable: Programmable
    • Frequency: 315 / 314.9 / 433
    • Activation Type: Not Programmed, Programmable
    • Core Material: Nickel-coated
    • Recommended Torque (N-m): 1.3 N-m
    • Valve Cap Included: Yes
    • Valve Color: Black
    • Material: Rubber
    • Power Source: Battery
  • Features:
    • Easy to program and covers the majority of vehicles on the road in North America
    • Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
    • Engineered and manufactured to OEM design and quality specifcations
    • Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
    • Compatible with the majority of independent TPMS programming and diagnostic tools on the market
    • Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
    • Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
    • Sensor comes fully assembled and ready to program and install
    • Future-proofed OE quality TPMS product supports new and pending OE technologies
  • Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Additional Fitment Information:
Vehicle
2008 - Volvo S60

Champion
  • Champion Copper Plus- Boxed - RC9YC
  • Gap 0.030in; Plug Type RC9YC
  • Champion Copper Plus 344 Spark Plug (Carton of 4)
  • Copper Plus
  • Product Attributes:
    • Hex Size:
      • 0.625
      • 15.880
    • Reach: 0.75
    • Center Electrode Tip Material: Nickel
    • Seat Type: Flat
    • Electrical Terminal Type: Removable Nut
    • Pre-Gap Size:
      • 0.035
      • 0.89
    • Classification: Champion Copper Plus
    • Ground Electrode Core Material: Nickel
    • Insulator Height: 0.06
    • Plug Type: Rc9yc
  • Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
4671057, BR7EF, BR7EFS, RC9YC, T22EPU

Additional Fitment Information:
Vehicle Block CC Engine CID
2008 - Volvo S60 L 2521 5 Cyl 2.5L -

Magnaflow
  • OEM Grade Universal Catalytic Converter - 2.50in.
  • Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
  • Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 4.25
    • Body Height: 4.375
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Finish: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • Body Length: 11
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: Midbed
    • Series: Oem Grade
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.5
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2.5
    • Prop 65 Y/N: No
    • Sensor Port Count: 1
    • Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51356
  • Features:
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Durable 308 stainless steel MIG welds
  • MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:
Vehicle Block CC Engine CID
2008 - Volvo S60 L 2435 5 Cyl 2.4L -

Wagner Lighting
  • Standard Multi-Purpose Light Bulb Box of 10
  • Boxed Product; Miniature Lamp
  • Wagner Standard 17171 Standard Multi-Purpose Light Bulb Box of 10
  • Product Attributes:
    • Bulb Color: Clear
    • Filament Type: C-2r
    • Average Rated Life: 200
    • Voltage: 12.000
    • Wattage: 5.000
    • Filament Quantity: 1
    • Amperage Rating: 0.420
    • Brightness: 4.000
    • Bulb Base Type: Ba15s
    • Bulb Type: Miniature Lamp B-6
  • Features:
    • MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
    • BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
    • HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
    • DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
    • COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
  • Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
  • This item must be purchased in quantities of 10

This Part Fits the Following OEM/Substitute Numbers:
12821, 12821CP, 13505779, 13505782, 1620798, 17171, 181747, 3303848, 3313508, 33310594601, 34905965003, 34910504003, 5007, 5007L, 5GJ847440000, 600000000004, 60777130, 63218372577...VIEW MORE

Additional Fitment Information:
Vehicle
2008 - Volvo S60

MagnaFlow Performance Exhaust
  • OEM Grade Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required
  • Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
  • Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 4.25
    • Body Height: 4.375
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: Midbed
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.5
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2.5
    • Sensor Port Count: 1
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:
Vehicle Block CC Engine CID
2008 - Volvo S60 L 2435 5 Cyl 2.4L -

Bosch
  • Bosch ICON Wiper Blade
  • ICON
  • Product Attributes:
    • Adapters Required: Yes
    • Prop 65 Warning Label Required?: No
    • Winter Blade: No
    • Automotive Item Weight (lbs): 1.212542 Lb
    • Private Brand?: No
    • Heated (Wiper Blade): No
    • Wiping Edges: 1
    • Pressure Point Quantity: Infinite
    • Adapters Included: No
    • Quick Connect Hardware Included: Yes
    • Frame Color: Black
    • Wiper Blade Connection Type: Male
    • Wiper Blade Material: Epdm
    • Wiper Blade Design: All-season
    • Attached Spoiler / Aerofoil: Yes
    • Blade Type: Beam
    • Refillable: No
  • Features:
    • ClearMax 365™ rubber technologyThis technology combines a soft rubbercore with a powder-coated shell which
    • Protects the wiping edge from ozonedeterioration, snow, sleet, rain, androad debris for longer life*
    • Reduces wiping friction forquieter performance
    • Resists contaminants such as fluids,salts, insects and other road debrisfor streak free visibility
    • Superior performance at all speedsAsymmetrical spoiler maintains consistentblade contact with the windshield
    • DynamicFit™ technologyOptimized beam bending technologyadapts to the entire curve of thewindshield
    • Easy installationOriginal equipment quality adapter
    • Extreme All Weather Performance. Tested to Perform Up to 40% Longer*
  • Bosch ICON Wiper Blade

Additional Fitment Information:
Vehicle Position
2008 - Volvo S60 Front Left
Showing 1 - 10 of 20 products

Loading...