Image
Product
Price
- 160 Amps
- Premium Remanufactured
- Product Attributes:
- New or Remanufactured: Remanufactured
- Prop 65 Y/N: Y
- Pulley Included: Yes
- Fan Type: Internal
- Prop 65 Warning: Warning: Cancer And Reproductive Harm
- Amperage Rating: 160
- Regulator Type: External
- Rotation Direction: Clockwise
This Part Fits the Following OEM/Substitute Numbers:
04896805AD, 421000-0620, 421000-0621, 4896805AD, 4896805AE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Dodge Challenger | V | - | 8 Cyl 5.7L | 345 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Dodge Challenger |
- 9005/90006/9012/H10;Fix Canbus and PWM Error
- W/ HID HEADLAMPS
- All in one harness to fix CANBus and PWM errors for any LED headlight and fog light conversion
- Product Attributes:
- IP Rating: Ip67
- Power: 6.5w
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
- Current: 0.5a At 13v
-
Features:
- Error cancelling wiring harness for vehicles equipped with CANBus and PWM system.
- Eliminates flickering, on and off flash, and dashboard warning lights and other vehicle electrical system complications.
- For use with LED headlight bulbs. Developed for upgrading LED headlight bulbs into the headlight and fog light of vehicles that operate with CANBUS / PWM technology. Simply plug and play installation to prevent bulb out warnings or flickering.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Dodge Challenger | High Beam |
- 9005/90006/9012/H10;Fix Canbus and PWM Error
- with High Intensity Discharge Headlights
- All in one harness to fix CANBus and PWM errors for any LED headlight and fog light conversion
- Product Attributes:
- IP Rating: Ip67
- Prop 65 Warning Label:
- Warning - Both Cancer And Reproduction.jpg
- Warning - Both Cancer And Reproduction.tif
- Power: 6.5w
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
- Current: 0.5a At 13v
-
Features:
- Error cancelling wiring harness for vehicles equipped with CANBus and PWM system.
- Eliminates flickering, on and off flash, and dashboard warning lights and other vehicle electrical system complications.
- For use with LED headlight bulbs. Developed for upgrading LED headlight bulbs into the headlight and fog light of vehicles that operate with CANBUS / PWM technology. Simply plug and play installation to prevent bulb out warnings or flickering.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Dodge Challenger |
- FRAM, TG10060, Oil Filter
- Spin-on Oil Filter With oil cooler
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Premium
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Silicone anti-drain back valve helps ensure safe engine start up
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-0841, 041-0852, 04892339AA, 10060, 12626224, 16510-78J00, 16510-78J01, 19303975, 1AMFL00008, 2-94561-109-0, 27060, 28004, 3334, 37060, 47060, 47060T, 4884900AB, 4892339AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Dodge Challenger | V | 3497 | 6 Cyl 3.5L | 215 |
- with 226 (mm) Ring Gear with Getrag 648(H226) Axle
This Part Fits the Following OEM/Substitute Numbers:
02800484, 0927090, 1160037, 1314773, 153835, 15665236, 15665281, 18435, 2140285, 231340, 2800484, 3172563, 455387C1, 455387C91, 4723145, 566000, 597570C91, 62AX460...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Dodge Challenger | Rear Outer |
- with 226 (mm) Ring Gear with Getrag 648(H226) Axle
This Part Fits the Following OEM/Substitute Numbers:
0009808402, 02800485, 04626725, 04746979, 05086780AA, 05086780AB, 05086789AB, 05583609, 0927091, 09418356, 10117880, 1100036, 12479221, 1314774, 15286375, 153834, 15635197, 15665237...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Dodge Challenger | Rear Outer |
- Speedometer Calibrator Color
- Gears 2.82 - 3.07 - 3.21 - 3.42 - 3.55 - 3.73 - 3.92 - 4.10 - 4.56 - 4.88 & 5.13 Tire Sizes 22.5 - 44 inches 1/4 inch increments Return Back To Stock DTCs Read and Clear Internet Updateable Not for sale or use in California
- TThe Speedometer Calibrator can correct your computer readings for different tires and/or rear gear ratios.
- Product Attributes:
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2009 - Dodge Challenger | V | 6059 | GAS | 8 Cyl 6.1L | W | 370 |
- Engine Oil Pressure Sensor
- Packaging Type: Box
- Product Attributes:
- Color/Finish:
- Black
- Negro
- Noir
- Connector Gender:
- Macho
- Male
- Wire Harness Included:
- No
- Non
- Connector Color:
- Black
- Negro
- Noir
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Contenidos del paquete: 1 Sensor De Presión Del Aceite Del Motor
- Connector Shape: Rectangular
- Terminal Gender:
- Macho
- Male
- Terminal Quantity: 3
- Cable Material:
- Metal
- Plastic
- Plástico
- Cableado incluido: No
- Color/Finish:
-
Features:
- Direct replacement - this engine oil pressure sensor is designed to match the fit and function of an original sensor on specified vehicles
- Ideal solution - engineered to help accurately monitor oil pressure when an original sensor has failed from heat or internal component damage
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil pressure sensor is designed to match the function of an original sensor on specified vehicles. It is engineered to help accurately monitor oil pressure when an original sensor has failed from heat or internal component damage.
This Part Fits the Following OEM/Substitute Numbers:
1N2, 1S6755, 2-80002, 5149062AA, 5149062AB, 56044777AA, 68060337AA, OP6185, PS317, PS317T, PS401, S4191, S4191P, V33730025
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Dodge Challenger | V | 6059 | 8 Cyl 6.1L | 370 |
- Speedometer Calibrator Color California Edition
- Tire Sizes 22.5 - 44 inches 1/4 inch increments Gears 2.82 - 3.07 - 3.21 - 3.42 - 3.55 - 3.73 - 3.92 - 4.10 - 4.56 - 4.88 & 5.13 Return Back To Stock DTCs Read and Clear Internet Updateable CARB E.O. D-260-40
- The Speedometer Calibrator can correct your computer readings for different tires and/or rear gear ratios.
- Product Attributes:
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2009 - Dodge Challenger | V | 6059 | GAS | 8 Cyl 6.1L | W | 370 |
Showing 1 - 10 of 22 products
Loading...