Image
Product
Price
- with Double Locking System
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Land Rover LR3 | Rear Right |
- with Double Locking System
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Land Rover LR3 | Rear Right |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Double Locking System
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Land Rover LR3 | Rear Left |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Double Locking System
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Land Rover LR3 | Rear Left |
Additional Fitment Information:
| Vehicle | Position | Chassis Range |
|---|---|---|
| 2009 - Land Rover LR3 | Front Right Outer | up to 496359 |
Additional Fitment Information:
| Vehicle | Position | Chassis Range |
|---|---|---|
| 2009 - Land Rover LR3 | Front Left Outer | up to 496359 |
- with Magna Steyr DD295 Transfer Case 2 Speed with Outer Race Width 17mm
This Part Fits the Following OEM/Substitute Numbers:
0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2009 - Land Rover LR3 | Front Rearward | 4WD |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Land Rover LR3 |
- Gray; Behind 2nd Row Seating w/o Sliding Loadspace Floor
- Cargo Liner; Gray; Behind 2nd Row Seating;
- Cargo Liner
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Provides Complete Trunk/Cargo Area Protection
- Computer Designed To Fit Your Vehicle
- Raised Lip To Keep Spills/Dirt/Grease Off Interior
- Made From Proprietary Custom Blended TPO
- Flexible Under Extreme Temperatures
- Textured Finish Keeps Cargo From Shifting
- Easy Installation
- Quick And Easy Cleanup
- WeatherTech Cargo Liners provide complete trunk - cargo area protection. Our cargo liners are computer designed to fit your vehicle and have a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your carpeting from normal wear and tear. Made from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under temperature extremes. The WeatherTech Cargo Liner features a textured finish which helps to keep cargo from shifting, and is perfect for hauling just about anything. Available in three colors, Black, Tan or Grey. Available for car trunks, SUVs and minivans. WeatherTech Bumper Protector is a great addition to your Cargo Liner to help protect the surface of your vehicle's bumper from dings and scratches when loading or unloading personal items or pets. The Bumper Protector is made from highly durable vinyl fabric that easily snaps onto your Cargo Liner by stainless, rust resistant snaps. The WeatherTech Bumper Protector comes in two sizes: 30 in. long x 30 in. wide and 30 in. long x 40 in. wide. Bumper Protectors are vehicle specific so the correct size option will be shown for your vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2009 - Land Rover LR3 | V | 4394 | 8 Cyl 4.4L | HSE Lux | - |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Land Rover LR3 | V | - | 6 Cyl 4.0L | 245 |
Showing 1 - 10 of 20 products
Loading...