Image
Product
Price
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Chrysler 200 |
- Front Rear Brake Caliper Rotor & Ceramic Pad Kit (10Pc) For Jeep Patriot Compas
- With 262mm Diameter Rear Rotor With Casting # 3502
- CMX Front Rear Disc Brake Caliper Rotors And Ceramic Pads Kit (10Pc) For Jeep Patriot Compass Chrysler Dodge Sebring Avenger Caliber 200 KC8-101280C
- CMX
- Product Attributes:
- WebNameEbay4: For Jeep Patriot Compass Chrysler Front Rear Brake Caliper Rotor Ceramic Pad Kit
- ComponentsSummaryRegularWithBrands: 4x Cmx Disc Brake Caliper, 4x Cmx Disc Brake Rotor, 2x Cmx Brake Pad Set
- ComponentsSummaryShort: 4x Disc Brake Caliper 4x Disc Rotor 2x Brake Pad
- WebNamePlain: Cmx Front Rear Disc Brake Caliper Rotors And Ceramic Pads Kit (10pc) Kc8-101280c
- ComponentsSummaryShortWithBrands: 4x Cmx Disc Brake Caliper 4x Cmx Disc Rotor 2x Cmx Brake Pad
- ComponentsSummaryLong: 2x Front Disc Brake Caliper (both Side) + 2x Rear Disc Brake Caliper (both Side) + 2x Front Disc Brake Rotor (both Side) + 2x Rear Disc Brake Rotor (both Side) + 1x Front Ceramic Brake Pad Set (hardware Included) + 1x Rear Ceramic Brake Pad Set (hardware
- WebNameLong: Cmx Front Rear Disc Brake Caliper Rotors And Ceramic Pads Kit (10pc) For Jeep Patriot Compass Chrysler Dodge Sebring Avenger Caliber 200 Kc8-101280c
- WebNameShort: Front Rear Brake Caliper Rotors Ceramic Pad Kit (10pc) For Jeep Patriot Compass Chrysler Kc8-101280c
- ComponentsSummaryRegular: 4x Disc Brake Caliper, 4x Disc Brake Rotor, 2x Brake Pad Set
- WebNameRegular: Cmx Front Rear Disc Brake Caliper Rotors And Ceramic Pads Kit (10pc) For Jeep Patriot Compass Chrysler Dodge Sebring Avenger Caliber 200 Kc8-101280c
- WebNameEbay2: [front+rear] Brake Caliper Rotor Ceramic Pad Kit (10pc) For Jeep Patriot Compass
- WebNameEbay3: Brake Caliper Rotor & Ceramic Pad Front Rear Kit (10pc) For Jeep Patriot Compass
- WebNameEbay: Front Rear Brake Caliper Rotor & Ceramic Pad Kit (10pc) For Jeep Patriot Compass
-
Features:
- CMX new calipers are manufactured to exacting OE standards to ensure a perfect performance for the life of the vehicle
- Exclusive CeramiX™ High-Density Ceramic compound provides optimal braking performance (Stable Friction, High Temperature Stability, Extended Lifetime Durability) while maintaining low dust and noise
- Engineered with carbon-enhanced XCast™ (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance
- Rubberized Multi-Layer Stainless Steel Shim reduces noise, vibration, and harshness for complete quietness
- Industrial grade ZincShield™ caliper coating provides an unmatched protection against Rust, Moisture and Oxidation
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to increase durability
- Kit Includes: 2x Front Disc Brake Caliper (Both Side) + 2x Rear Disc Brake Caliper (Both Side) + 2x Front Disc Brake Rotor (Both Side) + 2x Rear Disc Brake Rotor (Both Side) + 1x Front Ceramic Brake Pad Set (Hardware Included) + 1x Rear Ce
- Kit Variations: KC8-100963T KC8-100999P KC8-101265S KC8-102004N KC8-102005N KC8-102006N KC8-102007N KCD-100252C KCD-100368T KCD-100414S KCD-100424P KCD-100553N KCD-100554N KCD-100555N KCD-100556N KCG-100764S KCG-100830C KCG-100834T KCG-100
- Part Reference Numbers : 18A5032 SLB2090 2C-5032 18-P5032 18-B5032 BC63078 SC0207-1 C63078 2626XA 99-17728A 11-22165A-1 FRC11953N FRC11953C FRC11953 CN4304 18A5033 SLB2091 2C-5033 18-P5033 18-B5033 BC63077 SC0208-1 C63077 2626XB 99-17728B
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chrysler 200 | Front and Rear |
Additional Fitment Information:
| Vehicle | Engine Designation | Sub Model |
|---|---|---|
| 2011 - Chrysler 200 | ED3 | LX |
- 160 Amps
- Premium Remanufactured
- Product Attributes:
- New or Remanufactured: Remanufactured
- Prop 65 Y/N: Y
- Pulley Included: Yes
- Fan Type: Internal
- Prop 65 Warning: Warning: Cancer And Reproductive Harm
- Amperage Rating: 160
- Regulator Type: External
- Rotation Direction: Clockwise
This Part Fits the Following OEM/Substitute Numbers:
04801624AD, 04801624AE, 421000-0770, 421000-0771, 4801624AD, 4801624AE, 68272108AA, 68272108AB, 68272108AC, 68272108AD, 7B0-903-015C, P04801624AD, P04801624AE, RL801624AD
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Chrysler 200 | V | 3604 | 6 Cyl 3.6L | 220 |
- FRAM, TG10060, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Premium
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Silicone anti-drain back valve helps ensure safe engine start up
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-0841, 041-0852, 04892339AA, 10060, 12626224, 16510-78J00, 16510-78J01, 19303975, 1AMFL00008, 2-94561-109-0, 27060, 28004, 3334, 37060, 47060, 47060T, 4884900AB, 4892339AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Chrysler 200 | L | 2360 | 4 Cyl 2.4L | 144 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Chrysler 200 |
- OEM Grade Universal Catalytic Converter - 2.50in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: Oem Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51356
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Chrysler 200 | L | 2360 | EDG | 4 Cyl 2.4L | 144 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Chrysler 200 | L | 2360 | Converter (Inlet) | ED3 | 4 Cyl 2.4L | 144 |
- Engine Oil Pressure Sensor
- Packaging Type: Box
- Product Attributes:
- Color/Finish:
- Black
- Negro
- Noir
- Connector Gender:
- Macho
- Male
- Wire Harness Included:
- No
- Non
- Connector Color:
- Black
- Negro
- Noir
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Contenidos del paquete: 1 Sensor De Presión Del Aceite Del Motor
- Connector Shape: Rectangular
- Terminal Gender:
- Macho
- Male
- Terminal Quantity: 3
- Cable Material:
- Metal
- Plastic
- Plástico
- Cableado incluido: No
- Color/Finish:
-
Features:
- Direct replacement - this engine oil pressure sensor is designed to match the fit and function of an original sensor on specified vehicles
- Ideal solution - engineered to help accurately monitor oil pressure when an original sensor has failed from heat or internal component damage
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil pressure sensor is designed to match the function of an original sensor on specified vehicles. It is engineered to help accurately monitor oil pressure when an original sensor has failed from heat or internal component damage.
This Part Fits the Following OEM/Substitute Numbers:
1N2, 1S6755, 2-80002, 5149062AA, 5149062AB, 56044777AA, 68060337AA, OP6185, PS317, PS317T, PS401, S4191, S4191P, V33730025
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Chrysler 200 | V | 3604 | 6 Cyl 3.6L | 220 |
- OEM Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Chrysler 200 | L | 2360 | EDG | 4 Cyl 2.4L | 144 |
Showing 1 - 10 of 36 products
Loading...