Shop By Product Matching "280"
Choose your Submodel for your 2011 Ford Crown Victoria
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Crown Victoria |
- Speedometer Calibrator Color
- Tire Sizes 24-54 inches 1/4 inch increments Gears 2.73 - 3.08 - 3.27 - 3.31 - 3.55 - 3.73 - 3.90 - 4.10 & 4.30 - 4.56 Return Back To Stock DTCs Read and Clear Internet Updateable Not for sale or use in California
- TThe Speedometer Calibrator can correct your computer readings for different tires and/or rear gear ratios.
- Product Attributes:
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2011 - Ford Crown Victoria | V | - | FLEX | 8 Cyl 4.6L | V | 281 |
- Greaseable Premium Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium with Spicer 1350
- MOOG 331 Greaseable Premium Universal Joint for Ford F-150
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Grade Type: Premium
- Length Axis 1:
- 3.62
- 91.95
- Length Axis 2:
- 3.62
- 91.95
- Greaseable: Yes
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Regular Lube Fitting In Cross
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
043710C082, 114-10HD, 114-10HP, 114-578, 114-578R, 114-578U, 11410HD, 11410HP, 114578, 114578R, 114578U, 12471503, 12476231, 12547189, 14067677, 15583283, 15634970, 178...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ford Crown Victoria | At Rear Axle |
- Greaseable Premium Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium with Spicer 1350
- MOOG 331 Greaseable Premium Universal Joint for Ford F-150
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Grade Type: Premium
- Length Axis 1:
- 3.62
- 91.95
- Length Axis 2:
- 3.62
- 91.95
- Greaseable: Yes
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Regular Lube Fitting In Cross
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ford Crown Victoria | At Transmission |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Crown Victoria |
- WIX Fuel (Complete In-Line) Filter
- Original Equipment Part Number 2M5Z9155CA If Shorter Clips Are Required - Order Part # WCK11 separately - Contains Ten "Duckbill" Clips Per Box
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.318
- Duty Type: Ld
- Micron: 10.00
- Media Material: Cellulose
- Class: A
- Outlet: 5/16
- Inlet: 5/16
- WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
0 450 905 939, 0431034, 1075138, 1271652GT, 1272019GT, 1465 018, 147082001, 23595, 25-0113, 2M519155AA, 2M5Z9155CA, 31.769.00, 33595, 3595, 3620901, 3964 918, 4244, 4724...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Ford Crown Victoria | V | - | Canada | FLEX | 8 Cyl 4.6L | 281 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 1S7Z6731DA Also Available In Master Pack Version with Police Package Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Ford Crown Victoria | V | - | Canada | FLEX | 8 Cyl 4.6L | 281 |
- with 8.8 (in) Ring Gear with Visteon Axle
This Part Fits the Following OEM/Substitute Numbers:
0009808402, 02800485, 04626725, 04746979, 05086780AA, 05086780AB, 05086789AB, 05583609, 0927091, 09418356, 10117880, 1100036, 12479221, 1314774, 15286375, 153834, 15635197, 15665237...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ford Crown Victoria | Rear Inner |
- with 8.8 (in) Ring Gear with Visteon Axle
This Part Fits the Following OEM/Substitute Numbers:
02800484, 0927090, 1160037, 1314773, 153835, 15665236, 15665281, 18435, 2140285, 231340, 2800484, 3172563, 455387C1, 455387C91, 4723145, 566000, 597570C91, 62AX460...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ford Crown Victoria | Rear Inner |
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- 90 Degree Swivel Fitting Kit Included
- Product Attributes:
- BTU's Per Hour: 20000
- Mounting: 12-1/4 X 2-7/8
- Depth: 2
-
Features:
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- With our top of the line 10 Row Stack Plate cooler, 90 Degree Swivel Fitting, this highly efficient kit extends transmission life by preventing heat-related transmission failures while also improving shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Ford Crown Victoria | V | - | Automatic | United States | 8 Cyl 4.6L | 281 |
Showing 1 - 10 of 31 products
Loading...