Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - INFINITI G25 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- The tank seal is serviced separately from the Aisan sending unit. The tank seal is included with the Dorman sending unit.
- w/o Tank Seal
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - INFINITI G25 | Right |
- with Outer Race Width 17mm
This Part Fits the Following OEM/Substitute Numbers:
0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - INFINITI G25 | Rear | AWD |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 15208-3J400 Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 265
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 11-14
- Flow Rate: 8-10 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 292, 0 451 104 068, 0 451 104 509, 0 986 452 061, 0 986 452 605, 0 986 452 614, 0 986 AF0 063, 0 986 AF0 203, 0 986 AF1 014, 0 986 AF1 039, 0 986 AF1 058, 0 986 AF1 070, 0 986 AF1 148, 0 986 AF1 189, 1358, 180, 21358, 31358...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2011 - INFINITI G25 | V | 2496 | Canada | 6 Cyl 2.5L | 152 |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 15208-3J400 Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 265
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 11-14
- Flow Rate: 8-10 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 292, 0 451 104 068, 0 451 104 509, 0 986 452 061, 0 986 452 605, 0 986 452 614, 0 986 AF0 063, 0 986 AF0 203, 0 986 AF1 014, 0 986 AF1 039, 0 986 AF1 058, 0 986 AF1 070, 0 986 AF1 148, 0 986 AF1 189, 1358, 180, 21358, 31358...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2011 - INFINITI G25 | V | 2496 | Canada | 6 Cyl 2.5L | 152 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - INFINITI G25 |
- Premium Remanufactured
- Product Attributes:
- New or Remanufactured: Remanufactured
- Power Rating: 1.6
- Prop 65 Y/N: Y
- Nose Cone Type: Closed Nose
- Prop 65 Warning: Warning: Cancer And Reproductive Harm
- Rotation Direction: Clockwise
This Part Fits the Following OEM/Substitute Numbers:
23300-4GB0A, 23300-EY00A, 23300-EY00C, 23300-EY00D, 23300-EY00E, S114-932, S114-932A, S114-932B, S114-932C, S114-967
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - INFINITI G25 | V | 2496 | 6 Cyl 2.5L | 152 |
- PRIME Low-Met
- Product Attributes:
- Inner Pad Overall Thickness: 14
- Grade Type: Premium
- Outer Pad Overall Thickness: 14
- Brake Lubricant Included: No
- Inner Pad Width: 105
- Outer Pad Height: 37
- Abutment Clips Included: No
- Outer Pad Width: 105
- Inner Pad Height: 37
- FMSI Number: D12888405, D13938501, D16268842, D9057784
- WVA Number: 23872, 24088, 23871
- Friction Material Composition: Low-metallic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 0.74
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0252387114PD, 0252387114W, 0252487113W, 040604BA0B, 05P1839, 05P1862, 087601, 087602, 087621, 087629, 087641, 0986494090, 0986494857, 0986494861, 0986495089, 0986AB1186, 0986AB1260, 0986AB1289...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2011 - INFINITI G25 | V | 2496 | Rear | 6 Cyl 2.5L | 152 |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - INFINITI G25 | V | 2496 | 6 Cyl 2.5L | 152 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 15208-3J400; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 265
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 11-14
- Flow Rate: 8-10 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- WIX HD Oil Filters provide superior engine protection with high quality, high capacity media for applications such as medium and heavy trucks, farm, construction, mining, and other equipment. WIX filters are recommended for OEM oil and filter change intervals. High strength, corrosion-resistant cans, center tubes, and end caps with superior sealing components ensure a leak resistant, long-lasting, high performing oil filter under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 292, 0 451 104 068, 0 451 104 509, 0 986 452 061, 0 986 452 605, 0 986 452 614, 0 986 AF0 063, 0 986 AF0 203, 0 986 AF1 014, 0 986 AF1 039, 0 986 AF1 058, 0 986 AF1 070, 0 986 AF1 148, 0 986 AF1 189, 0 B631 14 302, 0 FE3R 14 302, 0222-14300, 02971114...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2011 - INFINITI G25 | V | 2496 | Canada | 6 Cyl 2.5L | 152 |
Showing 1 - 10 of 25 products
Loading...