Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Saab 9-5 |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Saab 9-5 | V | 2792 | Upper | 6 Cyl 2.8L | 170 |
- FRAM, CH9018, Oil Filter
- Cartridge Oil Filter
- Extra Guard
- Product Attributes:
- O-Ring Inside Diameter: 2.677
- O-Ring Thickness: 0.118
- Outer Diameter Top: 2.441
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Washable: No
- Non Slip Grip: No
- Torque Nut: No
- Housing Color: Na
- O-Ring Outside Diameter: 2.795
- Grade: Advanced
- Outer Diameter Bottom: 2.441
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Inside Diameter Bottom: 1.971
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: No
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Engineered for conventional and synthetic motor oil, Extra Guard offers proven engine protection for up to 10,000 miles (16,000 kilometers)
This Part Fits the Following OEM/Substitute Numbers:
041-0810, 12579143, 12605565, 12605566, 1275811, 1394524, 182, 19260345, 1AMFL00009, 21018801, 22685727, 24460713, 27082, 46919K, 47082, 55082T, 5650336, 57082...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Saab 9-5 | L | 1998 | 4 Cyl 2.0L | 122 |
- Autolite XP5263 Iridium XP Spark Plug
- Gap .040 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Saab 9-5 | L | 1998 | 4 Cyl 2.0L | 122 |
- Autolite XP5263 Iridium XP Spark Plug
- OE Style
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1119A-78J00-000, 1119A7-8J00, 12597464, 12598004, 12607280, 12611882, 12617309, 12620540, 12622561, 12625058, 12625661, 12681660, 19185438, 41-102, 41-103, 41-105, 41-107, 41-108...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Saab 9-5 | L | 1998 | 4 Cyl 2.0L | 122 |
- Autolite AI5263 Iridium Ultra Spark Plug
- Gap .040 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Saab 9-5 | L | 1998 | 4 Cyl 2.0L | 122 |
- Autolite AI5263 Iridium Ultra Spark Plug
- OE Style
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12597464, 12598004, 12607280, 12611882, 12622561, 12681660, 19185438, 41-102, 41-103, 41-105, 41-107, 41-108, 41-109, 41-118, 41-990, 6509, 6728, 9300...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Saab 9-5 | L | 1998 | 4 Cyl 2.0L | 122 |
- Spark Plug Iridium Power
- Gap 0.044 Iridium Power - Performance Upgrade with World's Smallest Center Electrode (0.4 mm Dia.) & Tapered Tip Patented U-Groove Design & Patented Ir Alloy (90% Ir)
- Spark Plug Iridium Power
- Spark Plug - Iridium Power
- Product Attributes:
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Center Electrode Core Material: Copper
- Hex Size: 16
- Reach: 19.0
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Tapercut, U-groove
- Manufacturer Heat Range: 20
- Ground Configuration: Standard
- Pre-Gap Size: 1.1
- Resistance: 5000.0
- Ground Electrode Core Material: Nickel
- Thread Diameter: 14.0
- Increased performance with World's smallest Iridium Center Eletrode (0.4mm).
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP03, 003 159 75 03, 003 159 78 03, 004 159 14 03, 06H 905 601 A, 06H 905 611, 06H 905 621, 09146367, 09482-00427, 09482-00429, 09482-00494, 09482-00508, 09482-00510, 09482-00548, 09482-00550, 0K01C-18-110, 0K23A-18-110, 0K2AA-18-110...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Saab 9-5 |
- 24" TRICO NeoForm Beam Blade
- Upgrade Option from Hybrid Blade to Beam Blade this is a 24'' 9 x 3 Hook Beam Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4 Side Lock
- TRICO NeoForm Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Blade Material: Natural Rubber
- AAP_UDA_121: Y
- AAP_UDA_4: 110
- AAP_UDA_122: Y
- AAP_UDA_123: N
- Engine Specific: N
- AAP_UDA_124: N
- ASIN Parent: B07gxctd52
- AAP_UDA_120: Y
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- Blade Design: Memory Curve Steel Beam
- AAP_UDA_126: N
- AAP_UDA_127: N
- AAP_UDA_128: N
- Adapter Type: Pre-attached Adapter
- AAP_UDA_33: 05070176
- Adapters Required: Yes
- Snowmobile: N
- AAP_UDA_32: Tne
- AAP_UDA_31: 326
- Shipping Exclusions: N
- High Performance: Y
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Non-Vehicle Specific: N
- Aggric Equipment: N
- Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: No
- Small Engine: N
- AAP_UDA_22: 1
- Wiper Element Formulation: All-weather Rubber
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Marine: N
- Is Item A Chemical: No
- Blade Type: Beam
- AAP_UDA_12: Ea
- Car or Light Truck: Y
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- ASIN Child: B001baeth8
- Attached Spoiler/Aerofoil: Yes
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Motorcycle ATV: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Industrial Off Highway Equip: N
-
Features:
- Premium Performance Beam Blade
- Your Vehicle-Specific Adaptor Already Pre-Attached For Easy Installation
- Extreme, all weather durability
- All-Weather, premium beam blade with Memory Curve Steel for uniform pressure and greater performance.
- Exclusive Dual-Point coupler helps eliminate streaking
- There is no wiper blade with such high-quality that is easier to install than a TRICO NeoForm blade. No extra adaptors, no guessing, way less hassle and still a superior premium beam blade. Designed with the DIY person in mind.
This Part Fits the Following OEM/Substitute Numbers:
16-240, 161-1324, 19162962, 24A, 5079280-2, 62443, 8-9924, 900-24-1B, 900-24-2B, WW-2401-PF
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Saab 9-5 | Front Left |
- Bulb Type H10 Pair
- ProLux Zero Space; Bulb Type H10 Pair;
- ProLux Zero Space
- Product Attributes:
- Industry/OE Number: H10
- WARNING CA Proposition 65: Yes
-
Features:
- Same Great Features As Silver Lux Pro
- Custom Aluminum Tower Design
- Bright White Light Rated At 6000K
- Made In USA
- 3 Year Warranty
- Equal in size to factory halogen bulb and 30% smaller heat sink than standard silver-lux pro. Same great features as silver-lux pro increases light visibility dramatically. Custom aluminum tower designed to correctly position the led behind in the lens. Each lamp includes a cree xhp70 led - with 180 degree beam angle and 6000 lumen output per kit. Bright white light rated at 6000k. Made in usa. 3 year warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Saab 9-5 |
Showing 1 - 10 of 16 products
Loading...