Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Outer Timing Cover
- (Gasket with Eyelets for Bolts)
- Lower
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2011 - Subaru Forester | Lower | Turbocharged |
- Rear Shock Assembly TOR Link Kit For 09-13 Subaru Forester Excludes Turbocharge
- Excludes Turbocharged
- Transit Auto Rear Complete Shock Assembly And TOR Link Kit For 2009-2013 Subaru Forester Excludes Turbocharged - Left Right Side (Driver Passenger) KSS-105280
- Transit Auto 1 Side
- Product Attributes:
- WebNameEbay4: For 09-13 Subaru Forester Excludes Turbocharged Rear Shock Assembly Tor Link Kit
- ComponentsSummaryRegularWithBrands: 1x Unity Automotive Suspension Strut And Coil Spring Assembly, 1x Tor Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: 1x Complete Strut 1x Link Kit
- ComponentsSummaryLongWithBrands: 1x Rear Unity Automotive Suspension Strut And Coil Spring Assembly + 1x Rear Tor Suspension Stabilizer Bar Link Kit
- WebNamePlain: Transit Auto Rear Complete Shock Assembly And Tor Link Kit Kss-105280
- ComponentsSummaryShortWithBrands: 1x Unity Complete Strut 1x Tor Link Kit
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Rear Suspension Strut And Coil Spring Assembly + 1x Rear Suspension Stabilizer Bar Link Kit
- WebNameLong: Transit Auto Rear Complete Shock Assembly And Tor Link Kit For 2009-2013 Subaru Forester Excludes Turbocharged - Left Right Side (driver Passenger) Kss-105280
- WebNameShort: Rear Shock Assembly And Tor Link Kit For 2009-2013 Subaru Forester Excludes Turbocharged Kss-105280
- ComponentsSummaryRegular: 1x Suspension Strut And Coil Spring Assembly, 1x Suspension Stabilizer Bar Link Kit
- WebNameRegular: Transit Auto Rear Complete Shock Assembly And Tor Link Kit For 2009-2013 Subaru Forester Excludes Turbocharged - Left Right Side (driver Passenger) Kss-105280
- WebNameEbay2: [rear] Shock Assembly And Tor Link Kit For Subaru Forester Excludes Turbocharged
- WebNameEbay3: Shock Assembly Tor Link Rear Kit For 09-13 Subaru Forester Excludes Turbocharged
- WebNameEbay: Rear Shock Assembly Tor Link Kit For 09-13 Subaru Forester Excludes Turbocharged
-
Features:
- Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle's weight
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- Kit Includes: 1x Rear Unity Automotive Suspension Strut and Coil Spring Assembly + 1x Rear TOR Suspension Stabilizer Bar Link Kit
- Kit Variations: K78A-100387 KSS-105184 KSS-105206 KSS-105264
- Part Reference Numbers : 1345695 G57706 SR4484 182695 172695 90201409X 824520 V172695 15970 W1345695 BK750404 SL72525XL SL72525PR SL72525 GS80861 MS80861 K750404 2653158 TK750404
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
1345695, 15970, 172695, 182695, 2653158, 537-230, G57706, K750404, MS80861, SL72525, SR4484, TK750404
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Subaru Forester | Rear |
- Multi-Purpose O-Ring
- FEL-PRO 35524 Multi-Purpose O-Ring for Subaru Outback
- Product Attributes:
- : O-ring
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
112251, 21236-AA000, 21236-AA010, 21236AA000, 21236AA010, 21236AA050, 21236AA100, 33661, 635493, 711110600, 74-0204, 740204, C31197, C31748, C31766, C32711, MD158570, MD170031...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Subaru Forester | H | 2458 | 4 Cyl 2.5L | - |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Subaru Forester |
- FRAM, XG9688, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.130
- Non Slip Grip: Yes
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Ultimate
- Gasket Outside Diameter: 2.420
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 1719859...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Subaru Forester | H | 2458 | 4 Cyl 2.5L | - |
- Premium Remanufactured
- Product Attributes:
- New or Remanufactured: Remanufactured
- Power Rating: 1.2
- Prop 65 Y/N: Y
- Nose Cone Type: Closed Nose
- Prop 65 Warning: Warning: Cancer And Reproductive Harm
- Rotation Direction: Counterclockwise
This Part Fits the Following OEM/Substitute Numbers:
23300-AA450, 23300-AA560, 32-00-6005, M0T30471, M0T30475
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2011 - Subaru Forester | H | 2498 | Manual | 4 Cyl 2.5L | Naturally Aspirated | 152 |
- Premium Remanufactured
- Product Attributes:
- New or Remanufactured: Remanufactured
- Power Rating: 1.4
- Prop 65 Y/N: Y
- Nose Cone Type: Closed Nose
- Prop 65 Warning: Warning: Cancer And Reproductive Harm
- Rotation Direction: Counterclockwise
This Part Fits the Following OEM/Substitute Numbers:
23300-AA570, 23300-AA572, 23300-AA573, 23300-AA710, 23300-AA71A, 23300-AA860, 23300AA570, 23300AA572, M000T20175, M0T20175, M0T20176, M0T20176ZC, M0T38571
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2011 - Subaru Forester | H | 2498 | Automatic | 4 Cyl 2.5L | Naturally Aspirated | 152 |
- FRAM, PH9688, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.130
- Non Slip Grip: Yes
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Advanced
- Gasket Outside Diameter: 2.420
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 183...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Subaru Forester | H | 2458 | 4 Cyl 2.5L | - |
- Spin-on Oil Filter
- DEFENSE
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 183...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Subaru Forester | H | 2458 | 4 Cyl 2.5L | - |
Showing 1 - 10 of 39 products
Loading...