Shop By Product Matching "280"
Choose your Submodel for your 2012 Acura TSX
Image
Product
Price
- Replaces P28080N
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 14.80
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 14.80
- Brake System: Nissin
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 93.60
- Outer Pad Height: 46.50
- Outer Pad Width: 93.60
- Pad Shims Included: Yes
- Inner Pad Height: 46.50
- FMSI Number: 8447-d1336
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 0.91
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Acura TSX | Rear | V6 |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 14.80
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 14.80
- Brake System: Nissin
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 93.60
- Outer Pad Height: 46.50
- Outer Pad Width: 93.60
- Pad Shims Included: Yes
- Inner Pad Height: 46.50
- FMSI Number: 8447-d1336
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 0.91
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986494338, 105.13360, 13046056482, 16-1336, 17-1336, 2443501, 301.13360, 43022TA0A00, 43022TA0A40, 43022TA0A41, 43022TA0A70, 43022TA0A80, 43022TA0A81, ACT1336, BC1336, D1336 8447, D1451 8447, D1451 8711...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Acura TSX | Rear | Base |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 17.00
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 17.00
- Brake System: Nissin
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 148.80
- Outer Pad Height: 58.70
- Outer Pad Width: 148.80
- Pad Shims Included: Yes
- Inner Pad Height: 58.70
- FMSI Number: 7656-d787
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Type: Mechanical
- Pad Wear Sensor Included: Yes
- Prepared For Pad Wear Sensor: Yes
- Weight: 1.95
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986424722, 13046058782, 2372901, 45022-S0K-A01, 45022-S0K-A11, 45022-S0K-A12, 45022-SDR-A10, 45022-SEA-J00, 45022-SEA-J11, 45022-SEC-A00, 45022-SEP-A00, 45022-SEP-A01, 45022-SEP-A11, 45022-SNB-000, 45022-SNB-010, 45022-SZ3-A00, 45022-TA0-A60, 45022-TE-0A61...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Acura TSX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Acura TSX |
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Acura TSX |
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Acura TSX |
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Acura TSX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- To Control Arm
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Acura TSX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Acura TSX |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Acura TSX |
Showing 1 - 10 of 27 products
Loading...