Shop By Product Matching "280"
Choose your Submodel for your 2012 Jeep Wrangler
Image
Product
Price
- Fits Spare Tire Carrier 82210485
- Third Brake Lamp;
- Third Brake Lamp
-
Features:
- Third Brake Lamp
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Jeep Wrangler |
- Alignment Caster / Pinion Angle Control Arm
- Adjusts Pinion Angle -3.00 to +3.00 Degrees
- Product Attributes:
- Grade Type: Regular
- Contenidos del paquete: 1 Brazo De Suspensión
-
Features:
- Versatile solution - the pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions
- Ensure fit - precision-engineered for seamless installation on specified vehicle years, makes, models and configurations
- Durable materials - this adjustable control arm is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions. It is precision-engineered and manufactured from durable materials for seamless installation and reliable performance on specified makes, models and years.
This Part Fits the Following OEM/Substitute Numbers:
2CB25310, 52060015AD, 52060015AF, CMS251209, RK100216, TC7356
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Rear |
- Alignment Caster / Pinion Angle Control Arm
- Adjusts Pinion Angle -3.00 to +3.00 Degrees
- Product Attributes:
- Grade Type: Regular
- Contenidos del paquete: 1 Brazo De Suspensión
-
Features:
- Versatile solution - the pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions
- Ensure fit - precision-engineered for seamless installation on specified vehicle years, makes, models and configurations
- Durable materials - this adjustable control arm is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions. It is precision-engineered and manufactured from durable materials for seamless installation and reliable performance on specified makes, models and years.
This Part Fits the Following OEM/Substitute Numbers:
52059976AC, 52059976AF, CMS251207, RK100217
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Front |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Front |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Front |
- with 1310 Aftermarket Drive Shaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Rear Driveshaft at Rear Axle |
- with 1310 Aftermarket Drive Shaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Front Driveshaft at Front Axle |
- with 1310 Aftermarket Drive Shaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Rear Driveshaft at Transmission |
- with 1310 Aftermarket Drive Shaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Front Driveshaft - CV at Transfer Case |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 1310 Aftermarket Drive Shaft with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Jeep Wrangler | Rear Driveshaft at Transmission |
Showing 1 - 10 of 89 products
Loading...