Image
Product
Price
- Premium Remanufactured
- Product Attributes:
- New or Remanufactured: Remanufactured
- Power Rating: 1.2
- Prop 65 Y/N: Y
- Nose Cone Type: Closed Nose
- Prop 65 Warning: Warning: Cancer And Reproductive Harm
- Rotation Direction: Clockwise
This Part Fits the Following OEM/Substitute Numbers:
438000-0410, 438000-2930, 438000-2931, 438000-4540, DL3T-11000-AA, DL3T-11000-BA, DL3T-11000-CA, DL3Z-11002-A, DL3Z-11002-B, DL3Z-11002-C
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Ford E-250 | V | - | 8 Cyl 4.6L | 281 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford E-250 |
- Greaseable Premium Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium with Spicer 1350
- MOOG 331 Greaseable Premium Universal Joint for Ford F-150
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Grade Type: Premium
- Length Axis 1:
- 3.62
- 91.95
- Length Axis 2:
- 3.62
- 91.95
- Greaseable: Yes
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Regular Lube Fitting In Cross
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Ford E-250 | At Transmission |
- Greaseable Premium Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium with Spicer 1350
- MOOG 331 Greaseable Premium Universal Joint for Ford F-150
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Grade Type: Premium
- Length Axis 1:
- 3.62
- 91.95
- Length Axis 2:
- 3.62
- 91.95
- Greaseable: Yes
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Regular Lube Fitting In Cross
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
043710C082, 114-10HD, 114-10HP, 114-578, 114-578R, 114-578U, 11410HD, 11410HP, 114578, 114578R, 114578U, 12471503, 12476231, 12547189, 14067677, 15583283, 15634970, 178...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Ford E-250 | At Rear Axle |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford E-250 |
- Steering Drag Link
- Functioning as Drag Link Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG DS300003 Steering Drag Link for Ford E-350 Super Duty
- Product Attributes:
- Part Description: Steering Drag Link
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2696069, 531-617, 626.65806, 627.65805, 740-65400, 8C2Z3304D, D1287, D1287XL, DS1287, DS1287E, DS300003, F2UZ3304B, GDS1287, MDS1287, TA2800
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford E-250 |
- 7 Way Blade and 4 Way Flat
- With Factory Tow Package
- 7 Way Blade and 4 Way Flat Plug-In Style
- Endurance ™
- Product Attributes:
- End Type: 7-way Rv Blade And 4-way Flat
- Vehicle End or Trailer End: Vehicle End
- Prop 65 Y/N: Y
-
Features:
- Connects To Your Vehicle?s OEM Tow Package Connector
- Easy-Open, Weatherproof Lid With Rugged, Oversized Hinge Allows Lid To Open 180 Degrees
- Impact And Corrosion Resistant
- Plug-In Simple(R) : No Cutting, No Splicing, Saves Time
- Limited 3 Year Warranty
- Husky Towing Products offers innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford E-250 |
- 7 Way Blade and 4 Way Flat
- 7 Way Blade and 4 Way Flat; Plug-In Style; With Factory Tow Package
- 7 Way Blade and 4 Way Flat Plug-In Style
- Endurance
- Product Attributes:
- End Type: 7-way Rv Blade And 4-way Flat
- Vehicle End or Trailer End: Vehicle End
- Prop 65 Y/N: Y
-
Features:
- Connects To Your Vehicle?s OEM Tow Package Connector
- Easy-Open, Weatherproof Lid With Rugged, Oversized Hinge Allows Lid To Open 180 Degrees
- Impact And Corrosion Resistant
- Plug-In Simple(R) : No Cutting, No Splicing, Saves Time
- Limited 3 Year Warranty
- Husky Towing Products offers innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford E-250 |
- 4 Way Flat & 7 Way Rnd Utilizes OEM Connectors Mounting Bracket Bulk
- 2 Door Connector Protection; 4 Way Flat And 7 Way Round; Bulk; Utilizes OEM Connectors; With Built-In Mounting Bracket; With Factory Tow Package
- 4 Way Flat And 7 Way Round Utilizes OEM Connectors 2 Door Connector Protection With Built-In Mounting Bracket Bulk
- Multi Tow (R)
- Product Attributes:
- End Type: 7-way Rv Blade And 4-way Flat
- Vehicle End or Trailer End: Vehicle End
- Prop 65 Y/N: Y
-
Features:
- Provides Multiple Towing Options From One Connector
- Connects To Your Vehicle?s OEM Tow Package Connector
- Exact OEM Replacement For Enhanced Fit And Maximum Weatherproofing
- Applies To Over 18 Different Vehicle Makes Equipped With A Factory Tow Package
- High Impact, ABS Plastic Construction
- Limited 1 Year Warranty
- Husky Towing Products offers innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford E-250 |
- 4 Way Flat & 7 Way Rnd Utilizes OEM Connectors Mounting Bracket Carded
- 2 Door Connector Protection; 4 Way Flat And 7 Way Round; Carded; Utilizes OEM Connectors; With Built-In Mounting Bracket; With Factory Tow Package
- 4 Way Flat And 7 Way Round Utilizes OEM Connectors 2 Door Connector Protection With Built-In Mounting Bracket Carded
- Multi Tow (R)
- Product Attributes:
- End Type: 7-way Rv Blade And 4-way Flat
- Vehicle End or Trailer End: Vehicle End
- Prop 65 Y/N: Y
-
Features:
- Provides Multiple Towing Options From One Connector
- Connects To Your Vehicle?s OEM Tow Package Connector
- Exact OEM Replacement For Enhanced Fit And Maximum Weatherproofing
- Applies To Over 18 Different Vehicle Makes Equipped With A Factory Tow Package
- High Impact, ABS Plastic Construction
- Limited 1 Year Warranty
- Husky Towing Products Offers Innovative Designs, High Quality, Custom Installation And Safe, Easy Operation. Husky Is Source For A Complete Line Of Hitches, Electrical Products And Towing Accessories.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Ford E-250 |
Showing 1 - 10 of 30 products
Loading...