Shop By Product Matching "280"
Choose your Engine for your 2016 Audi A6 Quattro
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Also use (1) 4H0 973 702A Wiring Harness Connector
Additional Fitment Information:
| Vehicle | Fuel Type | Aspiration |
|---|---|---|
| 2016 - Audi A6 Quattro | GAS | Turbocharged |
Additional Fitment Information:
| Vehicle | Fuel Type |
|---|---|
| 2016 - Audi A6 Quattro | DIESEL |
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 2016 - Audi A6 Quattro | Supercharged |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Audi A6 Quattro |
- Except Wear Indicator with 356mm Diameter x 34mm Rotor Thickness with Brake Code PR-1ZK
- PRIME Low-Met
- Product Attributes:
- Inner Pad Overall Thickness: 20.00
- Grade Type: Premium
- Outer Pad Overall Thickness: 20.00
- Brake System: Teves
- Brake Lubricant Included:
- No
- Yes
- Inner Pad Width: 192.90
- Outer Pad Height: 74.00
- Outer Pad Width: 192.90
- Pad Shims Included: Yes
- Inner Pad Height: 70.90
- FMSI Number: 8758-d1549
- Chamfered Edges: Yes
- Friction Material Composition: Low-metallic
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: Yes
- Weight: 3.12
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Audi A6 Quattro | Front |
- with 356mm Diameter x 34mm Rotor Thickness with Brake Code PR-1LF with Brake Code PR-1LG with Brake Code PR-1LL with Brake Code PR-1ZK Except Wear Indicator
- PRIME Low-Met
- Product Attributes:
- Inner Pad Overall Thickness: 20.00
- Grade Type: Premium
- Outer Pad Overall Thickness: 20.00
- Brake System: Teves
- Brake Lubricant Included:
- No
- Yes
- Inner Pad Width: 192.90
- Outer Pad Height: 74.00
- Outer Pad Width: 192.90
- Pad Shims Included: Yes
- Inner Pad Height: 70.90
- FMSI Number: 8758-d1549
- Chamfered Edges: Yes
- Friction Material Composition: Low-metallic
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: Yes
- Weight: 3.12
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986494447, 104.15490, 13046072802, 16-1549, 17-1549, 2515802, 300.15490, 4G0 615 121 D, 4G0 698 151 AJ, 4G0698151B, 4G0698151G, 4G0698151M, 4G0698151R, 4G0698151S, 4H0 615 121 E, 4H0 615 121 J, 4H0698151D, 4H0698151G...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Audi A6 Quattro | Front |
- Except Wear Indicator with Brake Code PR-1ZK with 356mm Diameter x 34mm Rotor Thickness
- PRIME Low-Met
- Product Attributes:
- Inner Pad Overall Thickness: 20.00
- Grade Type: Premium
- Outer Pad Overall Thickness: 20.00
- Brake System: Teves
- Brake Lubricant Included:
- No
- Yes
- Inner Pad Width: 192.90
- Outer Pad Height: 74.00
- Outer Pad Width: 192.90
- Pad Shims Included: Yes
- Inner Pad Height: 70.90
- FMSI Number: 8758-d1549
- Chamfered Edges: Yes
- Friction Material Composition: Low-metallic
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: Yes
- Weight: 3.12
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Audi A6 Quattro | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 2016 - Audi A6 Quattro | CYNB |
- Bosch ICON Wiper Blade
- ICON
- Product Attributes:
- Adapters Required: Yes
- Prop 65 Warning Label Required?: No
- Winter Blade: No
- Automotive Item Weight (lbs): 1.212542 Lb
- Private Brand?: No
- Heated (Wiper Blade): No
- Wiping Edges: 1
- Pressure Point Quantity: Infinite
- Adapters Included: No
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: Male
- Wiper Blade Material: Epdm
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: Yes
- Blade Type: Beam
- Refillable: No
-
Features:
- ClearMax 365™ rubber technologyThis technology combines a soft rubbercore with a powder-coated shell which
- Protects the wiping edge from ozonedeterioration, snow, sleet, rain, androad debris for longer life*
- Reduces wiping friction forquieter performance
- Resists contaminants such as fluids,salts, insects and other road debrisfor streak free visibility
- Superior performance at all speedsAsymmetrical spoiler maintains consistentblade contact with the windshield
- DynamicFit™ technologyOptimized beam bending technologyadapts to the entire curve of thewindshield
- Easy installationOriginal equipment quality adapter
- Extreme All Weather Performance. Tested to Perform Up to 40% Longer*
- Bosch ICON Wiper Blade
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Audi A6 Quattro | Front Left |
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- 90 Degree Swivel Fitting Kit Included
- Product Attributes:
- BTU's Per Hour: 20000
- Mounting: 12-1/4 X 2-7/8
- Depth: 2
-
Features:
- 10 Row Stack Plate Transmission Cooler Kit 90 Degree Swivel Fitting
- With our top of the line 10 Row Stack Plate cooler, 90 Degree Swivel Fitting, this highly efficient kit extends transmission life by preventing heat-related transmission failures while also improving shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 2016 - Audi A6 Quattro | V | 2967 | Automatic | United States | 6 Cyl 3.0L | 181 |
Showing 1 - 10 of 12 products
Loading...