Shop By Product Matching "280"
Choose your Engine for your 2017 Mercedes-Benz Sprinter 2500
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- M14 x 1.5 x 120mm
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Mercedes-Benz Sprinter 2500 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 14.5-15.5mm Range
- 14.5-15.5mm
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Mercedes-Benz Sprinter 2500 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 13-14.5mm Range
- 13-14.5mm Range (Crimp Type)
- 13-14.5mm
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Mercedes-Benz Sprinter 2500 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Fuel-Water Separator and Lubrication Package (Code U41)
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Mercedes-Benz Sprinter 2500 | V | 2987 | 6 Cyl 3.0L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Mercedes-Benz Sprinter 2500 | Left |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- M10
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Mercedes-Benz Sprinter 2500 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Compensation Ring
- Compensation Ring
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Mercedes-Benz Sprinter 2500 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Mercedes-Benz Sprinter 2500 | Right |
- 1.5 in. Lift; w/Bilstein B4; For PN[K9000/K9000DL/K9003/K9003DL/K9007/K9007DL/K9010/K9010DL] Use 275/75R16 Tire w/16x8 Wheel w/6 in. BS w/Minor Trimming~Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in. Lift; w/Bilstein B4; For PN[K9000/K9000DL/K9003/K9003DL/K9007/K9007DL/K9010/K9010DL];
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Can Be Paired With Fabtech Auxiliary Shock Mounts And Dirt Logic 2.25 Shocks For A Complete Upgrade
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicles suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2017 - Mercedes-Benz Sprinter 2500 | Front | 4WD |
- 1.5 in. Lift; For PN[K9003/K9003DL/K9004DL/K9005/K9005DL/K9006/K9010/K9010DL/K9011DL/K9012/K9012DL/K9013] Use 275/75R16 Tire w/16x8 Wheel w/6 in. BS w/Minor Trimming~Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Auxiliary Shock Kit; 1.5 in. Lift; Front; For PN[K9003/K9003DL/K9004DL/K9005/K9005DL/K9006/K9010/K9010DL/K9011DL/K9012/K9012DL/K9013];
- Auxiliary Shock Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Additional Shock Damping For Upfitted Van And/Or Hauling Heavy Cargo
- Brackets Attach To Subframe For A Quiet Ride
- No Interior Removal Required For Installation
- Compatible With Fabtech Coil Assist Kit
- Sprinter vans that have been upfitted for overlanding and /or carrying additional cargo weight often need more damping capacity than what the factory struts and shocks can provide. Fabtech addresses this problem with our heavy-duty auxiliary shock kit. These heavy-duty front auxiliary shock mounts are built with 1/4 in. thick steel and attach to the suspension subframe only. There is no attachment to the unibody structure. This type of mounting is vastly superior to other shock kits that mount to the unibody. By mounting to the subframe it helps isolate road noise and eliminates potential stress to the unibody. With only two holes to drill for installation it takes about 1-2 hours with no removal of the interior required.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2017 - Mercedes-Benz Sprinter 2500 | L | 2143 | Front | 4 Cyl 2.1L | 4WD | 131 |
Showing 1 - 10 of 26 products
Loading...