Shop By Product Matching "280"
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- M14 x 1.5 x 120mm
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz Metris |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- M10
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz Metris |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Oil Filter Housing Cap to Oil Filter Housing
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz Metris |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz Metris |
- Rear Semi-Metallic Disc Brake Pads For Mercedes-Benz Metris SIM-1893
- Rear Semi-Metallic Disc Brake Pads SIM-1893 For Mercedes-Benz Metris
- SIM Semi-Metallic With Hardware
- Product Attributes:
- WebNameEbay4: For Mercedes-benz Metris Rear Semi-metallic Disc Brake Pads Sim-1893
- Friction Material Attachment: Integrally Molded
- Grade Type: Regular
- ComponentsSummaryLongWithBrands: 1x Rear Sim Disc Brake Pad Set
- WebNamePlain: Rear Semi-metallic Disc Brake Pads Sim-1893
- ComponentsSummaryShortWithBrands: Sim Disc Brake Pad Set
- Pad Shims Included: Yes
- ComponentsSummaryLong: 1x Rear Disc Brake Pad Set
- FMSI Number: 9121
- Friction Material Thickness Inner Pad: 17.3
- Chamfered Edges: Yes
- Friction Material Composition: Semi-metallic
- WebNameShort: Rear Semi-metallic Disc Brake Pads Sim-1893 For Mercedes-benz Metris
- WebNameEbay: Rear Semi-metallic Disc Brake Pads For Mercedes-benz Metris Sim-1893
- Slotted: Yes
- Friction Material Thickness Outer Pad: 17.3
- ComponentsSummaryRegularWithBrands: Sim Disc Brake Pad Set
- ComponentsSummaryShort: Disc Brake Pad Set
- NumberOfPieces: 1
- Abutment Clips Included: Yes
- WebNameLong: Rear Semi-metallic Disc Brake Pads Sim-1893 For Mercedes-benz Metris
- ComponentsSummaryRegular: Disc Brake Pad Set
- WebNameRegular: Rear Semi-metallic Disc Brake Pads Sim-1893 For Mercedes-benz Metris
- Pad Wear Sensor Included: No
- WebNameEbay2: [rear] Semi-metallic Disc Brake Pads Sim-1893 For Mercedes-benz Metris
- WebNameEbay3: Semi-metallic Disc Brake Pads Rear Sim-1893 For Mercedes-benz Metris
-
Features:
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- High density friction material to ensure a long pad life and excellent stopping power
- Premium shims for provides increased strength and insulation against noise
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Improved new technology provides stable friction consistency, ensuring better braking performance
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- Scorched for almost no break-in process required and raised initial cold effectiveness
- Premium Stainless-Steel hardware included (when required by the application)
- Post-cured, high temperature, thermo-processed pads means no break-in required
- Manufactured in ISO-Certified Installations and without asbestos
- Part Reference Numbers : 9121 FT9121 D1893 1893
- SIM offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by SIM certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1893, 9121, D1893, FT9121
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Mercedes-Benz Metris | Rear |
- 9005/90006/9012/H10;Fix Canbus and PWM Error
- All in one harness to fix CANBus and PWM errors for any LED headlight and fog light conversion
- Product Attributes:
- IP Rating: Ip67
- Prop 65 Warning Label:
- Warning - Both Cancer And Reproduction.jpg
- Warning - Both Cancer And Reproduction.tif
- Power: 6.5w
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
- Current: 0.5a At 13v
-
Features:
- Error cancelling wiring harness for vehicles equipped with CANBus and PWM system.
- Eliminates flickering, on and off flash, and dashboard warning lights and other vehicle electrical system complications.
- For use with LED headlight bulbs. Developed for upgrading LED headlight bulbs into the headlight and fog light of vehicles that operate with CANBUS / PWM technology. Simply plug and play installation to prevent bulb out warnings or flickering.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Mercedes-Benz Metris | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz Metris |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz Metris |
Showing 1 - 8 of 8 products
Loading...