Shop By Product Matching "280"
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- M14 x 1.5 x 120mm
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz S450 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- M10
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz S450 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 13-14.5mm Range
- 13-14.5mm Range (Crimp Type)
- 13-14.5mm
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz S450 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz S450 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 14.5-15.5mm Range
- 14.5-15.5mm
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz S450 |
- TPMS Sensor - Clamp-In Aluminum Valve
- Supersession (ACES) Replaces 28210 Mounting Method: Clamp-in Torque: Nut torque = 71in-lbs, 8Nm; Valve core torque = 3.5 in-lbs, 0.4Nm Max Speed Rating: 130 Max Pressure Rating: 102 Frequency: 433.0 MHz Housing Material: Plastic With Mounting Hardware Pre-Programmed Not Programmable Valve Not Included Valve Cap Included Valve Core Material: Nickel Plated Valve Material: Aluminum Valve Color: Silver Valve Stem Not Included Washer Not Included Includes 1 TPMS sensor with nut Replaces ~28214~ Quantity Included: 1
- Product Attributes:
- Washer Included: No
- Mounting Method: Clamp-in
- Mounting Hardware Included: Yes
- Grommets Included: Yes
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 71 Inch/lbs.
- Valve Stem Included: Yes
- Mounting Location: Wheel
- Frequency: 433.0
- Valve Core Material: Nickel Plated
- Programmable: No
- Recommended Torque (N-m): 8 N-m
- Valve Cap Included: Yes
- Valve Color: Silver
- Valve Material: Aluminum
- Attachment Method: Clamp-in
-
Features:
- Quick and easy installation that does not require programming
- Ready out of the box
- OE fit, form and function validated and engineered by over 350 engineers dedicated to TPMS
- Premium quality TPMS sensors produced in Schrader’s secure and highly automated OE manufacturing facilities
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and year
- Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
550-2800, 921033, 921175, 9214, 974-043, A 000 905 39 07, A0009050030, A0009053907Q01, A0009054100, A0009057200, A0025409017, A0035400217, HY53 SE360671-AA, HY53-SE360671-AA, RDE043V21, SE58001, SE58002, TPM155...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz S450 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz S450 |
- Product Attributes:
- :
- 28.3
- 70
- Groove Quantity: 6
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Number of Bearings: 1
- Flat: N
- Material: Polymer
- Belt Type: Serpentine
- :
This Part Fits the Following OEM/Substitute Numbers:
10239930, 12555423, 12555424, 12556612, 12559325, 12569301, 12580772, 12580774, 17530-54L10, 231015, 2N1Q-19A216-BD, 2N1Z-8678-BA, 2N1Z-8678-BD, 36326, 38008, 3M4E-6C348-CB, 3M4Z-6C348-CA, 419-604...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Mercedes-Benz S450 |
- PRIME Low-Met
- Product Attributes:
- Inner Pad Overall Thickness: 18.80
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 18.80
- Brake System: Trw
- Brake Lubricant Included:
- No
- Yes
- Features: With Hardware And Brake Caliper Screws
- Inner Pad Width: 116.20
- Outer Pad Height: 65.00
- Outer Pad Width: 116.20
- Pad Shims Included: Yes
- Inner Pad Height: 54.70
- FMSI Number: 8916-d1689
- Chamfered Edges: No
- Friction Material Composition: Low-metallic
- Bolts Included: Yes
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: Yes
- Weight: 1.55
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0004202805, 006 420 72 20, 0064207220, 008 420 08 20, 008 420 34 20, 0084203420, 0986TB3208, 104.16890, 13046027802, 16-1689, 17-1689, 2507101, 300.16890, A0064207220, A0084203420, D1689 8916, DG1689, EHT1689H...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Mercedes-Benz S450 | Rear |
- Bosch ICON Wiper Blade
- without Washer sprayer integrated in blade
- ICON
- Product Attributes:
- Adapters Required: Yes
- Prop 65 Warning Label Required?: No
- Winter Blade: No
- Automotive Item Weight (lbs): 1.212542 Lb
- Private Brand?: No
- Heated (Wiper Blade): No
- Wiping Edges: 1
- Pressure Point Quantity: Infinite
- Adapters Included: No
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: Male
- Wiper Blade Material: Epdm
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: Yes
- Blade Type: Beam
- Refillable: No
-
Features:
- ClearMax 365™ rubber technologyThis technology combines a soft rubbercore with a powder-coated shell which
- Protects the wiping edge from ozonedeterioration, snow, sleet, rain, androad debris for longer life*
- Reduces wiping friction forquieter performance
- Resists contaminants such as fluids,salts, insects and other road debrisfor streak free visibility
- Superior performance at all speedsAsymmetrical spoiler maintains consistentblade contact with the windshield
- DynamicFit™ technologyOptimized beam bending technologyadapts to the entire curve of thewindshield
- Easy installationOriginal equipment quality adapter
- Extreme All Weather Performance. Tested to Perform Up to 40% Longer*
- Bosch ICON Wiper Blade
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Mercedes-Benz S450 | Front Left |
Showing 1 - 10 of 11 products
Loading...