Shop By Product Matching "280"
Choose your Submodel for your 2020 Toyota Tundra
Image
Product
Price
- Fender Flares OE-Style 4Pc Set
- Tech Info: Husky Liners Custom Molded Mud Guards are not designed to fit these fender flares.
- OE Style Fender Flares Black Smooth Finish 4-Piece Set
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- CA Prop 65: Y
- Category: Fender Flares
- Prop 65 Short Label Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Requires Drilling: No
- Front Flare Tire Coverage: 0.00
- Front Flare Height: 0.00
-
Features:
- Low-profile style seamlessly blends with the contours of your make and model, while adding coverage beyond factory-tire width.
- Provides additional coverage and protection beyond factory tire width in a smooth, pati-ready, matte black finish.
- Rugged Dura-Flex® 2000 ABS material for a long-lasting, UV-resistant surface engineered to bend without breaking.
- Backed by our limited lifetime warranty against warping, cracking or other factory defects.
- Mounts in minutes with all necessary hardware (included).
- Give your ride a low-profile touch that sets it apart from the pack with Husky OE Style Fender Flares. These low-profile flares seamlessly blend with the contours of your make and model, while adding coverage and protection beyond factory-tire width. Its rugged, Dura-Flex® ABS material provides a UV-resistant surface flexible enough to withstand anything mother nature dishes out and tough enough to maintain their integrity for years to come. Installs in minutes with all necessary hardware included. Available in a smooth, matte black, paint-ready finish and backed by Husky limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2020 - Toyota Tundra | Front and Rear | United States |
- w/o Gasket
-
This Product Must be Purchased in Quantities of : 5
- You must purchase this item in multiples of 5. Your order will be delayed and possibly canceled if another amount is specified.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Toyota Tundra |
- Replacement USCAR Socket with 24in. Wires (Vehicle Side)
- 24 in. Bonded Wire For Models w/Factory Tow Package
- CURT 56229 Replacement USCAR Connector Wiring Harness; 24-Inch Wires; 7 Pin Trailer Wiring
- 7-Way USCAR Electrical Connector
-
Features:
- Replaces Damaged Or Missing Uscar Vehicle Harnesses
- Includes 24 In. Color-Coded Bonded Wires For Easy Installation
- Made In USA
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24 in. of bonded wire for easy splicing into your vehicles wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Toyota Tundra |
- RC2 Bull Bar - Mounting Bracket Kit Only
- Cruise Control: Without Cruise Control Without Toyota Safey Sense
- These vehicle specific brackets provide a secure, strong mount of the Rhino Charger 2/RC2 to the vehicle.
- Product Attributes:
- Mounting Hardware Included: Yes
- Category: Front Guards
-
Features:
- Easy installation with no drilling required on most vehicles
- Heavy duty steel mounting brackets for Go Rhino RC2 bull bars
- Note: Most Go Rhino bull bars are also offered as complete, vehicle-specific kits
- These brackets are bolted to the backside of the bull bar where they are virtually hidden from sight when installed and are then bolted to the vehicle, no drilling required.
This Part Fits the Following OEM/Substitute Numbers:
522895
Additional Fitment Information:
| Vehicle | Doors | Region | Sub Model | Body |
|---|---|---|---|---|
| 2020 - Toyota Tundra | 4 | United States | SR5 | Extended Cab Pickup |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Toyota Tundra |
- BLOCKS / U-BOLTS
- 3" LIFT BLOCKS BUILT WITH 3 DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 810030 IS A PAIR OF 3" LIFT BLOCKS FABRICATED FROM STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Toyota Tundra |
- Replaces PGD1303C
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 5.660
- Outer Pad Height: 3.280
- Outer Pad Width: 5.660
- FMSI Number: D1303-8419
- Inner Pad Height: 3.280
- Inner Pad Overall Thickness: 0.695
- Mounting Hardware Included: Yes
- Friction Material Composition: Hybrid
- Outer Pad Overall Thickness: 0.695
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0446502440, 044650C020, 0446560280, 0446560281, 102.13030, 103.13030, 105.13030, 106.13030, 16-1303, 17-1303, 171303, 21-1303, 300.13030, 301.13030, 305.13030, 306.13030, 308.13030, 309.13030...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Toyota Tundra | Front |
- Replaces ATD1303C
- Raybestos Specialty - Truck
- Product Attributes:
- Inner Pad Width: 5.660
- Outer Pad Height: 3.280
- Outer Pad Width: 5.660
- FMSI Number: D1303-8419
- Inner Pad Height: 3.280
- Inner Pad Overall Thickness: 0.695
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.695
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0446502440, 044650C020, 0446560280, 0446560281, 102.13030, 103.13030, 105.13030, 106.13030, 16-1303, 17-1303, 171303, 300.13030, 301.13030, 305.13030, 306.13030, 308.13030, 309.13030, 355013151...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Toyota Tundra | Front |
- 4 piece
- FF DRT STYLE 4PC
- Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Fender Flares
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2020 - Toyota Tundra | Fleetside |
- Catalytic Converter Shield;
- Catalytic Converter Shield
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer; And Birth Defects Or Other Reproductive Harm. For More Information: Www.roughcountry.com/prop65 And Www.p65warnings.ca.gov
-
Features:
- Made From 14-Gauge Steel For Durability And Longevity
- Provides Protection For The Catalytic Converter Against Damage From Road Debris/Speed Bumps And Other Hazards
- Reduces The Risk Of Theft Of The Catalytic Converter Which Can Be A Valuable Target For Thieves
- Powder-Coated Finish For Added Resistance To Corrosion And The Elements
- Easy Bolt-On Installation
- Are you tired of constantly worrying about the safety of your valuable catalytic converter while navigating through rough roads, speed bumps, and potential hazards? Look no further than Rough Country?ÇÖs Anti-Theft Skid Plate for the 07-21 Tundra ?Çô a game-changing solution designed to safeguard your vehicles catalytic converter while providing unparalleled peace of mind. Crafted to tackle the challenges of the road head-on, our skid plate stands out from the rest thanks to its impressive range of unique features.\
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - Toyota Tundra | 1794 Edition |
Showing 1 - 10 of 26 products
Loading...