Shop By Product Matching "280"
Choose your Submodel for your 2021 Ford F-150
Image
Product
Price
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow 2021-2023 Ford F-150 Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280267. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2021-2023 Ford F-150 and interchanges with OE part ML3Z-5E212-A. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
ML3Z-5E212-A
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Ford F-150 | V | 3496 | Left | GAS | 6 Cyl 3.5L | XLT | 213 |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow 2021-2023 Ford F-150 Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280266. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2021-2023 Ford F-150 and interchanges with OE part ML3Z-5C226-A. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
ML3Z-5C226-A
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Ford F-150 | V | 3496 | Right | GAS | 6 Cyl 3.5L | XLT | 213 |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: Yes
- Body Type: Spun
- Inlet Mounting Hardware Included: Yes
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280758
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280758. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2021-2023 Ford F-150. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Ford F-150 | V | - | Right | 6 Cyl 2.7L | 164 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Solenoid/ Oil Control Valve Assembly
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Ford F-150 | V | 3496 | 6 Cyl 3.5L | 213 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Exhaust
- Solenoid/ Oil Control Valve Assembly
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Ford F-150 | V | 4951 | 8 Cyl 5.0L | 302 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Ford F-150 | V | 3496 | Left | GAS | 6 Cyl 3.5L | Lariat | 213 |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre Converter And Midbed
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Outlet Mounting Hardware Included: Yes
- Heat Shield Attached: No
- Hangers Included: Yes
- CARB Executive Order Number: Not Applicable
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow 2021-2022 Ford F-150 Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280275. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 2021-2022 Ford F-150 and interchanges with OE part ML3Z-5E212-T. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
ML3Z-5E212-T
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Ford F-150 | V | 4951 | Right | 8 Cyl 5.0L | 302 |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280757
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280757. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2021-2023 Ford F-150. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Ford F-150 | V | - | Left | 6 Cyl 2.7L | 164 |
- 4 piece
- FF DRT STYLE 4PC
- Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Fender Flares
Additional Fitment Information:
| Vehicle | Bed | Sub Model |
|---|---|---|
| 2021 - Ford F-150 | Fleetside | Police Responder |
- Fender Flares RVL Flares 4Pc Set
- Tech Info: Flares are 3" wide (tall) and extend 1.5" out from the sheet metal.
- RVL Fender Flares Black Smooth Finish 4-Piece Set
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- CA Prop 65: Y
- Category: Fender Flares
- Prop 65 Short Label Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Requires Drilling: No
- Front Flare Tire Coverage: 1.25
- Front Flare Height: 3.25
-
Features:
- RVL Fender Flares feature an integrated running light/turn signal at the top of each wheel arch for added visibility at night or in low lighting conditions.
- Husky RVL Fender Flares feature a functional mud flap that seamlessly transitions to an extended mud flap at the rear. Giving your vehicle double-duty protection in a one-of-a-kind fender flare.
- Features proprietary Dura-Flex® 2000 ABS construction for impact and UV resistance. Its low-profile design extends past the fender of vehicle adding two inches of protection for extra-wide tires.
- Available in a smooth, matte black finish that’s ready to paint if you choose (not necessary)
- Husky RVL Fender Flares are built to last and covered by our limited lifetime warranty against warping, cracking or other factory defects.
- Installing Husky RVL Fender Flares is a snap. They’re easy to mount in minutes with all necessary hardware included (varies by vehicle make and model).
- Treat your vehicle to the added protection and visibility delivered by Husky RVL Fender Flares. These innovative, low-profile flares not only feature an integrated LED running light/turn signal, they also seamlessly transition into a mud flap at the rear. It’s double-duty protection that perfectly blends with the contours of your make and model, while adding two inches of protection beyond factory-tire width. Rugged, Dura-Flex® 2000 ABS construction gives you a UV-resistant, flexible fender flare tough enough to maintain its integrity for years to come. Installs in minutes with all necessary hardware included. Available in a smooth, matte black, paint-ready finish and backed by Husky's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2021 - Ford F-150 | Front and Rear | United States |
Showing 1 - 10 of 60 products
Loading...