Shop By Product Matching "280"
Choose your Submodel for your 2021 GMC Canyon
Image
Product
Price
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: Yes
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280676
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280676. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2017-2022 Chevrolet Colorado and 2017-2022 GMC Canyon. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - GMC Canyon | V | - | Front Left | 6 Cyl 3.6L | 222 |
- Rear Disc Coated Rotors Ceramic Pads Parking Shoes & Hardware Kit For Chevrolet
- Transit Auto Rear Disc Coated Rotors Ceramic Pads Parking Brake Shoes And Hardware Kit For 2021-2022 Chevrolet Colorado GMC Canyon KGC-103280
- KGC - Genius Rotors And CMX Pads TQ Parking Shoes And Hardware
- Product Attributes:
- WebNameEbay4: For Chevrolet Rear Disc Coated Rotors Ceramic Pads Parking Shoes & Hardware Kit
- ComponentsSummaryRegularWithBrands: 2x Genius Disc Brake Rotor, 1x Cmx Brake Pad Set, 1x Top Quality Parking Brake Shoe, 1x Top Quality Parking Brake Hardware Kit
- ComponentsSummaryShort: 2x Disc Rotor 1x Brake Pad 1x Parking Brake Shoe 1x Parking Brake Hardware Kit
- ComponentsSummaryLongWithBrands: 2x Rear Genius Disc Brake Rotor (both Side) + 1x Rear Ceramic Cmx Brake Pad Set + 1x Rear Top Quality Parking Brake Shoe + 1x Rear Top Quality Parking Brake Hardware Kit
- WebNamePlain: Transit Auto Rear Disc Coated Rotors Ceramic Pads Parking Brake Shoes And Hardware Kit Kgc-103280
- ComponentsSummaryShortWithBrands: 2x Genius Disc Rotor 1x Cmx Brake Pad 1x Tq Parking Brake Shoe 1x Tq Parking Brake Hardware Kit
- NumberOfPieces: 5
- ComponentsSummaryLong: 2x Rear Disc Brake Rotor (both Side) + 1x Rear Ceramic Brake Pad Set + 1x Rear Parking Brake Shoe + 1x Rear Parking Brake Hardware Kit
- WebNameLong: Transit Auto Rear Disc Coated Rotors Ceramic Pads Parking Brake Shoes And Hardware Kit For 2021-2022 Chevrolet Colorado Gmc Canyon Kgc-103280
- WebNameShort: Rear Disc Coated Rotors Ceramic Pads Parking Shoes & Hardware Kit For Chevrolet Colorado Kgc-103280
- ComponentsSummaryRegular: 2x Disc Brake Rotor, 1x Brake Pad Set, 1x Parking Brake Shoe, 1x Parking Brake Hardware Kit
- WebNameRegular: Transit Auto Rear Disc Coated Rotors Ceramic Pads Parking Brake Shoes And Hardware Kit For 2021-2022 Chevrolet Colorado Gmc Canyon Kgc-103280
- WebNameEbay2: [rear] Disc Coated Rotors Ceramic Pads Parking Shoes Hardware Kit For Chevrolet
- WebNameEbay3: Disc Coated Rotors Ceramic Pads Parking Shoes & Hardware Rear Kit For Chevrolet
- WebNameEbay: Rear Disc Coated Rotors Ceramic Pads Parking Shoes & Hardware Kit For Chevrolet
-
Features:
- Exclusive CeramiX™ High-Density Ceramic compound provides optimal braking performance (Stable Friction, High Temperature Stability, Extended Lifetime Durability) while maintaining low dust and noise
- Exclusive MetalliX™ Low Resin Semi-Metallic compound provides unmatched braking performance (abrasive friction, high temperature tolerance, quicker compound warming) while maintaining low dust and noise
- TQ OE-matched material gives our spring kit the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Engineered with with Carbon-Enhanced G-Cast™ (G11H18/G3000) iron castings to achieve an optimal braking performance (strength, stability, durability)
- Rubberized Multi-Layer Stainless Steel Shim reduces noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing
- resulting in high quality and reliable products
- Kit Includes: 2x Rear Genius Disc Brake Rotor (Both Side) + 1x Rear Ceramic CMX Brake Pad Set + 1x Rear Top Quality Parking Brake Shoe + 1x Rear Top Quality Parking Brake Hardware Kit
- Kit Variations: K8A-107930 K8A-108618 K8A-109215 K8C-103904 K8C-104477 K8F-104278 K8F-104752 K8F-105096 K8S-104175 K8S-104304 K8S-104662 K8T-104773 K8T-105142 KDA-103189 KDA-103227 KDA-103812 KDC-101259 KDC-101320 KDC-101502 KDF-101351 KDF
- Part Reference Numbers : AC90915 AR90915 CR90915 PR90915 YH106716C YH106716 120.66090 BR901938 55505 2488872508 488872508 7488872508 901938 950957 650041 EC582743 582743 BGM1085 9599 SG9599X PF9599X AD9599 FT9599 D2370 2370 1082 B1082 NB10
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - GMC Canyon | Rear |
- Replacement USCAR Socket with 24in. Wires (Vehicle Side)
- 24 in. Bonded Wire For Models w/Factory Tow Package
- CURT 56229 Replacement USCAR Connector Wiring Harness; 24-Inch Wires; 7 Pin Trailer Wiring
- 7-Way USCAR Electrical Connector
-
Features:
- Replaces Damaged Or Missing Uscar Vehicle Harnesses
- Includes 24 In. Color-Coded Bonded Wires For Easy Installation
- Made In USA
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24 in. of bonded wire for easy splicing into your vehicles wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - GMC Canyon |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - GMC Canyon |
- BLOCKS / U-BOLTS
- 3" LIFT BLOCKS BUILT WITH 3 DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 810030 IS A PAIR OF 3" LIFT BLOCKS FABRICATED FROM STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - GMC Canyon |
- LP-15 Load Leveler Helper Springs
- Up to 1500 lbs. load assist
- LP-15 Load Leveler Helper Springs GM 15-18 Colorado/Canyon
- The Hellwig LP-15 helper spring line fits the Mid-size and Small pick-up groups. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units increase your vehicles level load carrying capacity up to the manufacturer?s Gross Vehicle Weight Rating. Featuring heavy duty components and easy to read installation instructions this helper spring line-up does a lot of work for its size. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Packaged in one kit, this unit comes complete with plated and powder coated components, spring leaves, heavy duty hardware and installation instructions to make this unit easy to install and use. Fine tune your vehicle's leaf spring suspension to suit your particular needs by adjusting the heavy duty U-bolts provided. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new requirement. Once installed and adjusted you are free to haul and/or tow a multitude of equipment and commodities with greater control and stability.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2021 - GMC Canyon | 4WD |
- Bosch DirectConnect Wiper Blade
- DirectConnect
- Product Attributes:
- Adapters Required: Yes
- Prop 65 Warning Label Required?: No
- Winter Blade: No
- Automotive Item Weight (lbs): 0.343921 Lb
- Heated (Wiper Blade): No
- Wiping Edges: 1
- Pressure Point Quantity: 6
- Adapters Included: Yes
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: Male
- Wiper Blade Material: Natural Rubber W/graphite
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: No
- Blade Type: Conventional
- Refillable: No
-
Features:
- Dual steel tension springs supports the wiping edge for a consistent clean wipe
- Graphite-treated wiping edge reduces friction and noise
- Flow-through frame reduces blade lift-off
- Quick and easy installation
- All steel frame construction for dependable wiping
- Bosch DirectConnect Wiper Blade
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - GMC Canyon | Front Right |
- Backroadz Truck Tent - Compact Regular Bed
- Product Attributes:
- Door Quantity: 1
- Carrying Case Included: Yes
- Person Quantity: 2
- No plan? No problem. The Backroadz Truck Tent was built with the outdoors in mind. With its simple and secure setup, you can have a spacious shelter with over 5ft of headroom in minutes. The large door door makes entering a breeze, and with sewn in storm flaps and flooring, privacy and weather protection is never issue. For added protection, quickly throw on the included rainfly!
Additional Fitment Information:
| Vehicle | Bed Length |
|---|---|
| 2021 - GMC Canyon | 74.0 |
- Backroadz Truck Tent - Compact Regular Bed
- Product Attributes:
- Door Quantity: 1
- Carrying Case Included: Yes
- Person Quantity: 2
- No plan? No problem. The Backroadz Truck Tent was built with the outdoors in mind. With its simple and secure setup, you can have a spacious shelter with over 5ft of headroom in minutes. The large door door makes entering a breeze, and with sewn in storm flaps and flooring, privacy and weather protection is never issue. For added protection, quickly throw on the included rainfly!
Additional Fitment Information:
| Vehicle | Bed Length |
|---|---|
| 2021 - GMC Canyon | 74.0 |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: Yes
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280675
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280675. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2017-2022 Chevrolet Colorado and 2017-2022 GMC Canyon. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - GMC Canyon | V | - | Front Right | 6 Cyl 3.6L | 222 |
Showing 1 - 10 of 22 products
Loading...