Shop By Product Matching "280"
Choose your Engine for your 2021 GMC Yukon XL
Image
Product
Price
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 4
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280211
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280211. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2019-2023 GMC Sierra 1500, 2019-2023 Chevrolet Silverado 1500, and more, this direct-fit catalytic converter also interchanges with OE parts 84655075 and 23241308, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
23241308, 84520355, 84557806, 84655075
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - GMC Yukon XL | V | 6162 | 8 Cyl 6.2L | 376 |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 4
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280656
- California Air Resources Board (CARB) Certified: No
-
Features:
- Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280656. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2019-2023 Chevrolet Silverado 1500, 2019-2023 GMC Sierra 1500, and more, this direct-fit catalytic converter also interchanges with OE parts 19420299 and 23241309, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
19420299, 23241309, 84520354, 84557805, 84655074
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - GMC Yukon XL | V | 5328 | 8 Cyl 5.3L | 325 |
- Rear Coat Brake Rotor Ceramic Pad Kit For Chevrolet GMC Silverado 1500 Sierra X
- Transit Auto Rear Coated Disc Brake Rotors And Ceramic Pads Kit For Chevrolet GMC Silverado 1500 Sierra Yukon Tahoe Limited XL Cadillac LTD Suburban Escalade ESV KGT-102808
- Genius Rotors And TEC
- Product Attributes:
- WebNameEbay4: For Chevrolet Gmc Silverado 1500 Sierra Xl Rear Coat Brake Rotor Ceramic Pad Kit
- ComponentsSummaryRegularWithBrands: 2x Genius Disc Brake Rotor, 1x Tec Brake Pad Set
- ComponentsSummaryShort: 2x Disc Rotor 1x Brake Pad
- ComponentsSummaryLongWithBrands: 2x Rear Coated Genius Disc Brake Rotor (both Side) + 1x Rear Ceramic Tec Brake Pad Set (with Sensor) (hardware Included)
- WebNamePlain: Transit Auto Rear Coated Disc Brake Rotors And Ceramic Pads Kit Kgt-102808
- ComponentsSummaryShortWithBrands: 2x Genius Disc Rotor 1x Tec Brake Pad
- NumberOfPieces: 3
- ComponentsSummaryLong: 2x Rear Coated Disc Brake Rotor (both Side) + 1x Rear Ceramic Brake Pad Set (with Sensor) (hardware Included)
- WebNameLong: Transit Auto Rear Coated Disc Brake Rotors And Ceramic Pads Kit For Chevrolet Gmc Silverado 1500 Sierra Yukon Tahoe Limited Xl Cadillac Ltd Suburban Escalade Esv Kgt-102808
- WebNameShort: Rear Coat Brake Rotor Ceramic Pad Kit For Chevrolet Gmc Silverado 1500 Sierra Yukon Tahoe Kgt-102808
- ComponentsSummaryRegular: 2x Disc Brake Rotor, 1x Brake Pad Set
- WebNameRegular: Transit Auto Rear Coated Disc Brake Rotors And Ceramic Pads Kit For Chevrolet Gmc Silverado 1500 Sierra Yukon Tahoe Limited Xl Cadillac Ltd Suburban Escalade Esv Kgt-102808
- WebNameEbay2: [rear] Coat Brake Rotors Ceramic Pad Kit For Chevrolet Gmc Silverado 1500 Sierra
- WebNameEbay3: Coat Brake Rotor Ceramic Pad Rear Kit For Chevrolet Gmc Silverado 1500 Sierra Xl
- WebNameEbay: Rear Coat Brake Rotor Ceramic Pad Kit For Chevrolet Gmc Silverado 1500 Sierra Xl
-
Features:
- Exclusive SilentGrip™ Low Resin Ceramic formula provides superior braking performance (Smooth Friction, Extreme Temperature Stability, Quicker Compound Cooling) while maintaining low dust and noise
- Engineered with with Carbon-Enhanced G-Cast™ (G11H18/G3000) iron castings to achieve an optimal braking performance (strength, stability, durability)
- Fiber-Reinforced Multi-Layer Shim with rubber core eliminates noise, vibration, and harshness for complete quietness
- Exclusive G-Coat™ double-layer (8µm) protective coating provides rust protection on 100% of the non-braking surface
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Scorched for almost no break-in process required, raised initial cold effectiveness and enhanced Pad-to-Rotor contact
- Kit Includes: 2x Rear Coated Genius Disc Brake Rotor (Both Side) + 1x Rear Ceramic TEC Brake Pad Set (With Sensor) (Hardware Included)
- Kit Variations: K8A-101067 K8A-101069 K8C-103046 K8F-103621 K8S-104031 K8T-104012 KDA-101986 KDA-101987 KDC-100963 KDF-101071 KDS-101076 KDT-101090 KGA-103386 KGA-103388 KGC-102211 KGF-102642 KGS-102708
- Part Reference Numbers : AC90835 AR90835 CR90835 PR90835 YH653388C YH653388 120.66081 121.66081 BR901834 55408 248882457 48882457 748882457 901834 650029 EC1582457 582457 BGM1068 BD180850E BD180850 2174A D2174A 9419 SG9419X PF9419X AD9419
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
120.66081, 121.66081, 2174, 248882457, 48882457, 55408, 582457, 650029, 748882457, 901834, 9419, BD180850, BD180850E, BGM1068, BR901834, D2174, GCR-55408, N/A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - GMC Yukon XL | Rear |
- Replacement USCAR Socket with 24in. Wires (Vehicle Side)
- 24 in. Bonded Wire For Models w/Factory Tow Package
- CURT 56229 Replacement USCAR Connector Wiring Harness; 24-Inch Wires; 7 Pin Trailer Wiring
- 7-Way USCAR Electrical Connector
-
Features:
- Replaces Damaged Or Missing Uscar Vehicle Harnesses
- Includes 24 In. Color-Coded Bonded Wires For Easy Installation
- Made In USA
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24 in. of bonded wire for easy splicing into your vehicles wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - GMC Yukon XL |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - GMC Yukon XL |
- PSX26W;100% Fitment;Compact and Powerful;Patented Thermal Management
- W/ HALOGEN CAPSULE HEADLAMPS
- COMPACT + POWERFUL: Introducing the revolutionary Tiny Monster Concept Series LED Performance Bulbs. You will be amazed by the power output of such a compact bulb. Conversion of headlights and fog lights to LED has never been easier.
- Product Attributes:
- Power Consumption: 18 Watt
- Light Output: 6,000 Lumen Per Kit
- IP Rating: Ip67
- Amp Draw per Bulb: 1.3 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 7.5-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Each kit produces a powerful 6,000 lumen light output
- Precision optics designed for long range visibility and zero glare
- Patented INTGCool integrated heat sink allowing for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in advance
- Temperature regulation provides dependable operation at full intensity
- TopAim bulb head 360degree rotates for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - GMC Yukon XL | Front |
- PSX26W;100% Fitment;Compact and Powerful;Patented Thermal Management
- W/ HID HEADLAMPS
- COMPACT + POWERFUL: Introducing the revolutionary Tiny Monster Concept Series LED Performance Bulbs. You will be amazed by the power output of such a compact bulb. Conversion of headlights and fog lights to LED has never been easier.
- Product Attributes:
- Power Consumption: 18 Watt
- Light Output: 6,000 Lumen Per Kit
- IP Rating: Ip67
- Amp Draw per Bulb: 1.3 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 7.5-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Each kit produces a powerful 6,000 lumen light output
- Precision optics designed for long range visibility and zero glare
- Patented INTGCool integrated heat sink allowing for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in advance
- Temperature regulation provides dependable operation at full intensity
- TopAim bulb head 360degree rotates for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - GMC Yukon XL | Front |
- 3rd Seat Floor Liner
- 2nd Row Configuration: 2nd Row Bench Seats
- X-act Contour - 3rd Seat Floor Liner
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- Location: Third Row
- CA Prop 65: Y
- Category: X-act Contour Series
- Requires Drilling: No
-
Features:
- Thinner plastic floor mats warp and curl over time. X-act Contour® is engineered to stay true to the shape of your floorboards for life. It's strong yet pliable material is easy to remove and clean no matter what comes down.
- Our FormFit Design™ process perfectly forms each liner to the detailed contours of your specific ride. How? Well… our Nerds use lasers and computers to precisely measure each individual make and model’s floorboard to create the perfect fit.
- With the perfect balance of strength and softness, our rubberized DuraGrip™ material delivers no-slip, no-slide, driving confidence no matter what the road brings.
- Our patented FormFit Edge™ features a raised ridge that runs along the door jam, protecting your truck, van, or SUV from all manner of muck.
- Over vinyl or carpet, our StayPut™ Cleats firmly lock to your factory anchors. It's rock-steady stability underfoot, only by Husky.
- When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem with this or any Husky product, we’ll replace it.
- Folds and molds for easy installation, removal and cleanup. Just yank it out, spray it down, and carry on.
- Proudly made in the USA.
- Line your floorboards with laser-fit toughness. X-Act Contour® mats are super-rugged wherever adventure takes you, soft and pliable where it counts. Our no-slip rubberized DuraGrip™ material stands up to whatever you're laying down with legendary Husky durability---guaranteed for life.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2021 - GMC Yukon XL | Third Row | United States |
- 2 in. Lift Includes The Following Parts~Necessary Installation Hardware~Strut Extensions
- Front Leveling Kit; 2 in. Lift;
- Front Leveling Kit
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- No Need To Disassemble Your Struts To Install
- 100 Pct. Simple Bolt-On Installation
- Works w/All Orem Control Arms
- Level Up Your Stance and Capability: Run up to a 32-inch tire and eliminate factory rake with Rough Countrys 2-Inch Leveling Suspension Kit for Chevy/GMC 1500 pickups. This easy-to-install upgrade levels the front with the rear for a bold, aggressive look and improved ground clearance-perfect for taking on trails or standing out on the street.No Strut Disassembly, No Hassle: Featuring lower front strut mount extensions, this kit installs without the need to disassemble your struts, saving time and effort. The 100% bolt-on design means no cutting, no welding, and no headaches-just straightforward installation with basic hand tools.Built for Compatibility and Performance: Whether your truck features cast steel, stamped steel, or aluminum control arms, this kit is fully compatible and designed to integrate seamlessly with all OEM configurations. Plus, youll maintain the factory ride quality you love while unlocking the freedom of a leveled stance and larger tire clearance.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - GMC Yukon XL | V | 6162 | Front | 8 Cyl 6.2L | 376 |
- Dark Smoke
- Low Profile Aerodynamic Hood Protector; Dark Smoke;
- Low Profile Aerodynamic Hood Protector
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm
-
Features:
- Aerodynamically Designed
- Provides Protection Against Chips/Bug Stains
- Made From Aerospace-Grade Acrylic
- Virtually Indestructible And Scratch Resistant
- Easily Installed
- No Drilling Required
- Beautiful/Protective Addition To Any Vehicle
- The Hood Protector is a custom-fit bug and debris shield that helps preserve and maintain paint finishes. Features a sleek and low profile made from flexible acrylic, built to withstand anything the road throws at it. Made in the USA. The Hood Protector is made from a durable, yet flexible acrylic that withstands the wear-and-tear from the daily grind. Through its exclusive, custom-fit design, the Hood Protector follows the hood's contours with a wrap design that provides a sleek, aerodynamically-friendly finish.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - GMC Yukon XL |
Showing 1 - 10 of 10 products
Loading...