Image
Product
Price
- w/o Gasket
-
This Product Must be Purchased in Quantities of : 5
- You must purchase this item in multiples of 5. Your order will be delayed and possibly canceled if another amount is specified.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Lexus IS300 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Lexus IS300 |
- NGK Laser Iridium High Ignitability Spark Plug
- Gap 0.036" Actual OE Manufacturer; OE Spark Plug Is High Ignitability. For Optimal Performance, Replace With High Ignitability Spark Plugs. 40,000 mi Factory Recommended Service Interval
- Laser Iridium High Ignitability Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Dilfr7k9g
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Dilfr7k9g
- Resistor Type: Yes
- Stock Number: 91961
- Ground Electrode Tip Design: Dual Fine Electrode (dfe) - High Ignitability
- Pre-Gap Size:
- .036
- 0.9
- Ground Electrode Core Material: Copper
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 1.043
- 26.5
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 7
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- DFE DESIGN: Double fine electrode (platinum pin) provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: DFE tip and iridium alloy center electrode produce the most advanced OE spark plug technology
- RECOMMENDED USAGE: Best for vehicles with OE DFE iridium alloy plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Laser Iridium High Ignitability spark plugs feature raised platinum pad or platinum fine wire tip on the ground electrode for even wear in distributorless ignition systems and improved spark performance.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
91961
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Lexus IS300 | L | 1998 | 4 Cyl 2.0L | 122 |
- Raybestos R-Line
- Product Attributes:
- FMSI Number: D1391-8841
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0446630280, 0446630281, 0446630282, 0446630310, 0446630311, 0446630312, 105.13911, 105.17330, 301.13911, 305.13911, 308.13911, 500.13911
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Lexus IS300 | Rear |
- 24" TRICO NeoForm Beam Blade
- Upgrade Option from Hybrid Blade to Beam Blade this is a 24'' 9 x 3 Hook Beam Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4 Side Lock
- TRICO NeoForm Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Blade Material: Natural Rubber
- AAP_UDA_121: Y
- AAP_UDA_4: 110
- AAP_UDA_122: Y
- AAP_UDA_123: N
- Engine Specific: N
- AAP_UDA_124: N
- ASIN Parent: B07gxctd52
- AAP_UDA_120: Y
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- Blade Design: Memory Curve Steel Beam
- AAP_UDA_126: N
- AAP_UDA_127: N
- AAP_UDA_128: N
- Adapter Type: Pre-attached Adapter
- AAP_UDA_33: 05070176
- Adapters Required: Yes
- Snowmobile: N
- AAP_UDA_32: Tne
- AAP_UDA_31: 326
- Shipping Exclusions: N
- High Performance: Y
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Non-Vehicle Specific: N
- Aggric Equipment: N
- Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: No
- Small Engine: N
- AAP_UDA_22: 1
- Wiper Element Formulation: All-weather Rubber
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Marine: N
- Is Item A Chemical: No
- Blade Type: Beam
- AAP_UDA_12: Ea
- Car or Light Truck: Y
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- ASIN Child: B001baeth8
- Attached Spoiler/Aerofoil: Yes
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Motorcycle ATV: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Industrial Off Highway Equip: N
-
Features:
- Premium Performance Beam Blade
- Your Vehicle-Specific Adaptor Already Pre-Attached For Easy Installation
- Extreme, all weather durability
- All-Weather, premium beam blade with Memory Curve Steel for uniform pressure and greater performance.
- Exclusive Dual-Point coupler helps eliminate streaking
- There is no wiper blade with such high-quality that is easier to install than a TRICO NeoForm blade. No extra adaptors, no guessing, way less hassle and still a superior premium beam blade. Designed with the DIY person in mind.
This Part Fits the Following OEM/Substitute Numbers:
16-240, 161-1324, 19162962, 24A, 5079280-2, 62443, 8-9924, 900-24-1B, 900-24-2B, WW-2401-PF
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Lexus IS300 | Front Left |
This Part Fits the Following OEM/Substitute Numbers:
121800H031, 121800H032, 121800P020, 121800P021, 1218028022, 1218031010, 1218038020, 14155, 703-1925, 8155, 9MO155, MO155, NI, P8155
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Lexus IS300 | L | 1998 | 4 Cyl 2.0L | 122 |
- Bosch DirectConnect Wiper Blade
- DirectConnect
- Product Attributes:
- Adapters Required: Yes
- Prop 65 Warning Label Required?: No
- Winter Blade: No
- Automotive Item Weight (lbs): 0.343921 Lb
- Heated (Wiper Blade): No
- Wiping Edges: 1
- Pressure Point Quantity: 6
- Adapters Included: Yes
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: Male
- Wiper Blade Material: Natural Rubber W/graphite
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: No
- Blade Type: Conventional
- Refillable: No
-
Features:
- Dual steel tension springs supports the wiping edge for a consistent clean wipe
- Graphite-treated wiping edge reduces friction and noise
- Flow-through frame reduces blade lift-off
- Quick and easy installation
- All steel frame construction for dependable wiping
- Bosch DirectConnect Wiper Blade
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Lexus IS300 | Front Right |
- FloorLiner™ DigitalFit®
- Black
- FloorLiner™ DigitalFit®; Black; Front;
- FloorLiner(TM) DigitalFit(R)
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Made Of Natural Heavy Duty Rubber
- Deeply Sculpted Channels
- Designed To Trap Water/Road Salt/Mud And Sand
- Made Of 16 lbs. Of Pliable Natural Rubber
- Will Not Curl/Crack/Harden In Sub-Zero Weather
- Anti-Skid Ridges To Prevent Shifting
- Protective Non-Stick Finish For Quick Cleanup
- Hold Up To 1.5 Quarts Of Water Without Spilling
- The WeatherTech FloorLiner DigitalFit accurately and completely lines the interior carpet giving absolute interior protection. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending HighDensity TriExtruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner DigitalFit over the door sill. No muss-no fuss.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Lexus IS300 | Front | RWD |
- Front Left Lower Suspension Control Arm For Lexus IS250 IS300 IS350 GS350 GS300
- TOR Front Left (Driver Side) Lower Suspension Control Arm TOR-CA1215 For Lexus IS250 IS300 IS350 GS350 GS300
- TOR
- Product Attributes:
- WebNameEbay4: For Lexus Is250 Is300 Is350 Front Left Lower Suspension Control Arm Tor-ca1215
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm
- ComponentsSummaryShort: Suspension Control Arm
- ComponentsSummaryLongWithBrands: 1x Front Left Lower Tor Suspension Control Arm
- WebNamePlain: Tor Front Left (driver Side) Lower Suspension Control Arm Tor-ca1215
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Left Lower Suspension Control Arm
- WebNameLong: Tor Front Left (driver Side) Lower Suspension Control Arm Tor-ca1215 For Lexus Is250 Is300 Is350 Gs350 Gs300
- WebNameShort: Front Left Lower Suspension Control Arm Tor-ca1215 For Lexus Is250 Is300 Is350 Gs350 Gs300
- ComponentsSummaryRegular: Suspension Control Arm
- WebNameRegular: Tor Front Left (driver Side) Lower Suspension Control Arm Tor-ca1215 For Lexus Is250 Is300 Is350 Gs350 Gs300
- WebNameEbay2: [front Left Lower] Suspension Control Arm Tor-ca1215 For Lexus Is250 Is300 Is350
- WebNameEbay3: Suspension Control Arm Front Left Lower Tor-ca1215 For Lexus Is250 Is300 Is350
- WebNameEbay: Front Left Lower Suspension Control Arm For Lexus Is250 Is300 Is350 Gs350 Gs300
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK643680 CA64063PR CA64063 MS861132 GS861132 CMS861132 CK643680 K643680 RK643680 1231168 2607905 4864030300 CP5589 CA1215
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2607905, 4864030300, 528-091, CA64063, CA64063PR, CMS861132, CP5589, GS861132, MS861132, N/A, RK643680
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Lexus IS300 | V | 3456 | Front Left Lower | 6 Cyl 3.5L | - |
- Front Right Lower Suspension Control Arm For Lexus IS250 IS300 IS350 GS350 GS30
- TOR Front Right (Passenger Side) Lower Suspension Control Arm TOR-CA1216 For Lexus IS250 IS300 IS350 GS350 GS300
- TOR
- Product Attributes:
- WebNameEbay4: For Lexus Is250 Is300 Is350 Front Right Lower Suspension Control Arm Tor-ca1216
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm
- ComponentsSummaryShort: Suspension Control Arm
- ComponentsSummaryLongWithBrands: 1x Front Right Lower Tor Suspension Control Arm
- WebNamePlain: Tor Front Right (passenger Side) Lower Suspension Control Arm Tor-ca1216
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Right Lower Suspension Control Arm
- WebNameLong: Tor Front Right (passenger Side) Lower Suspension Control Arm Tor-ca1216 For Lexus Is250 Is300 Is350 Gs350 Gs300
- WebNameShort: Front Right Lower Suspension Control Arm Tor-ca1216 For Lexus Is250 Is300 Is350 Gs350 Gs300
- ComponentsSummaryRegular: Suspension Control Arm
- WebNameRegular: Tor Front Right (passenger Side) Lower Suspension Control Arm Tor-ca1216 For Lexus Is250 Is300 Is350 Gs350 Gs300
- WebNameEbay2: [front Right Lower] Suspension Control Arm Tor-ca1216 For Lexus Is250 Is300
- WebNameEbay3: Suspension Control Arm Front Right Lower Tor-ca1216 For Lexus Is250 Is300 Is350
- WebNameEbay: Front Right Lower Suspension Control Arm For Lexus Is250 Is300 Is350 Gs350 Gs300
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK643681 CA64064PR CA64064 MS861133 GS861133 CMS861133 CK643681 K643681 RK643681 1331168 2607906 4862030300 CP5590 CA1216
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2607906, 4862030300, 528-092, CA64064, CA64064PR, CMS861133, CP5590, GS861133, MS861133, N/A, RK643681
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Lexus IS300 | V | 3456 | Front Right Lower | 6 Cyl 3.5L | - |
Showing 1 - 10 of 10 products
Loading...