Image
Product
Price
- w/o Gasket
-
This Product Must be Purchased in Quantities of : 5
- You must purchase this item in multiples of 5. Your order will be delayed and possibly canceled if another amount is specified.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Lexus IS350 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Lexus IS350 |
- Raybestos R-Line
- Product Attributes:
- FMSI Number: D1391-8841
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0446630280, 0446630281, 0446630282, 0446630310, 0446630311, 0446630312, 105.13911, 105.17330, 301.13911, 305.13911, 308.13911, 500.13911
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Lexus IS350 | Rear |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 16.80
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 16.80
- Brake System: Akebono
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 115.30
- Outer Pad Height: 45.70
- Outer Pad Width: 115.30
- Pad Shims Included: Yes
- Inner Pad Height: 45.70
- FMSI Number: 8841-d1391
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: No
- Weight: 0.9
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
04466-30280, 04466-30281, 04466-30282, 04466-30310, 04466-30311, 04466-30312, 0986AB3531, 13046056662, 2552501, 446630280, 446630281, 446630310, 446630311, ACT1391, ACT1391A, D1391 8841, DG1391, FDB5237...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Manuf. Body Code | Drive Type |
|---|---|---|---|
| 2021 - Lexus IS350 | Rear | GSE31 | RWD |
- 24" TRICO NeoForm Beam Blade
- Upgrade Option from Hybrid Blade to Beam Blade this is a 24'' 9 x 3 Hook Beam Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4 Side Lock
- TRICO NeoForm Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Blade Material: Natural Rubber
- AAP_UDA_121: Y
- AAP_UDA_4: 110
- AAP_UDA_122: Y
- AAP_UDA_123: N
- Engine Specific: N
- AAP_UDA_124: N
- ASIN Parent: B07gxctd52
- AAP_UDA_120: Y
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- Blade Design: Memory Curve Steel Beam
- AAP_UDA_126: N
- AAP_UDA_127: N
- AAP_UDA_128: N
- Adapter Type: Pre-attached Adapter
- AAP_UDA_33: 05070176
- Adapters Required: Yes
- Snowmobile: N
- AAP_UDA_32: Tne
- AAP_UDA_31: 326
- Shipping Exclusions: N
- High Performance: Y
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Non-Vehicle Specific: N
- Aggric Equipment: N
- Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: No
- Small Engine: N
- AAP_UDA_22: 1
- Wiper Element Formulation: All-weather Rubber
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Marine: N
- Is Item A Chemical: No
- Blade Type: Beam
- AAP_UDA_12: Ea
- Car or Light Truck: Y
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- ASIN Child: B001baeth8
- Attached Spoiler/Aerofoil: Yes
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Motorcycle ATV: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Industrial Off Highway Equip: N
-
Features:
- Premium Performance Beam Blade
- Your Vehicle-Specific Adaptor Already Pre-Attached For Easy Installation
- Extreme, all weather durability
- All-Weather, premium beam blade with Memory Curve Steel for uniform pressure and greater performance.
- Exclusive Dual-Point coupler helps eliminate streaking
- There is no wiper blade with such high-quality that is easier to install than a TRICO NeoForm blade. No extra adaptors, no guessing, way less hassle and still a superior premium beam blade. Designed with the DIY person in mind.
This Part Fits the Following OEM/Substitute Numbers:
16-240, 161-1324, 19162962, 24A, 5079280-2, 62443, 8-9924, 900-24-1B, 900-24-2B, WW-2401-PF
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Lexus IS350 | Front Left |
This Part Fits the Following OEM/Substitute Numbers:
121800H031, 121800H032, 121800P020, 121800P021, 1218028022, 1218031010, 1218038020, 14155, 703-1925, 8155, 9MO155, MO155, NI, P8155
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Lexus IS350 | V | 3456 | 6 Cyl 3.5L | - |
- Bosch DirectConnect Wiper Blade
- DirectConnect
- Product Attributes:
- Adapters Required: Yes
- Prop 65 Warning Label Required?: No
- Winter Blade: No
- Automotive Item Weight (lbs): 0.343921 Lb
- Heated (Wiper Blade): No
- Wiping Edges: 1
- Pressure Point Quantity: 6
- Adapters Included: Yes
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: Male
- Wiper Blade Material: Natural Rubber W/graphite
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: No
- Blade Type: Conventional
- Refillable: No
-
Features:
- Dual steel tension springs supports the wiping edge for a consistent clean wipe
- Graphite-treated wiping edge reduces friction and noise
- Flow-through frame reduces blade lift-off
- Quick and easy installation
- All steel frame construction for dependable wiping
- Bosch DirectConnect Wiper Blade
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Lexus IS350 | Front Right |
- FloorLiner™ DigitalFit®
- Black
- FloorLiner™ DigitalFit®; Black; Front;
- FloorLiner(TM) DigitalFit(R)
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Made Of Natural Heavy Duty Rubber
- Deeply Sculpted Channels
- Designed To Trap Water/Road Salt/Mud And Sand
- Made Of 16 lbs. Of Pliable Natural Rubber
- Will Not Curl/Crack/Harden In Sub-Zero Weather
- Anti-Skid Ridges To Prevent Shifting
- Protective Non-Stick Finish For Quick Cleanup
- Hold Up To 1.5 Quarts Of Water Without Spilling
- The WeatherTech FloorLiner DigitalFit accurately and completely lines the interior carpet giving absolute interior protection. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending HighDensity TriExtruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner DigitalFit over the door sill. No muss-no fuss.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2021 - Lexus IS350 | Front | F Sport | RWD |
- Axle-Back Exhaust System - S-Type
- S-Type Axle-Back Exhaust System 2014-2024 Lexus IS 250/ IS 350/ IS 350 F Sport 2.5L/ 3.5L V6 Automatic/ Manual Transmission Rear Wheel Drive/ All Wheel Drive 4 Door.
- Axle-Back Exhaust System - S-Type - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.250 In.
- Exhaust Type: Axle-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Title Extended: 2014-2024 Lexus Is 250/ Is 350/ Is 350 F Sport Axle-back Exhaust System S-type Part # 11898
- Inlet Inside Diameter: 2.250 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.250 In.
- Exit Position: Single Rear
- Tip Diameter: 4.250 In.
- Off Road Use Only: No
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
-
Features:
- 2014-2017 Vehicles have oval openings in rear valance. 2018-2023 Vehicles have rectangle openings.
- BORLA system features 4.25" x 3.5" oval polished T-304 stainless steel tips
- 2014-2017 Vehicles have oval openings in rear valance. 2018-2024 Vehicles have rectangle openings. This 2.25" diameter BORLA system features 4.25" x 3.5" oval polished T-304 stainless steel tips. It delivers the classic S-Type sound level with no drone inside the vehicle. BORLA Cat-Back & Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what youd expect from the worlds most experienced (and most winning) exhaust brand.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Lexus IS350 |
- Front Left Lower Suspension Control Arm For Lexus IS250 IS300 IS350 GS350 GS300
- TOR Front Left (Driver Side) Lower Suspension Control Arm TOR-CA1215 For Lexus IS250 IS300 IS350 GS350 GS300
- TOR
- Product Attributes:
- WebNameEbay4: For Lexus Is250 Is300 Is350 Front Left Lower Suspension Control Arm Tor-ca1215
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm
- ComponentsSummaryShort: Suspension Control Arm
- ComponentsSummaryLongWithBrands: 1x Front Left Lower Tor Suspension Control Arm
- WebNamePlain: Tor Front Left (driver Side) Lower Suspension Control Arm Tor-ca1215
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Left Lower Suspension Control Arm
- WebNameLong: Tor Front Left (driver Side) Lower Suspension Control Arm Tor-ca1215 For Lexus Is250 Is300 Is350 Gs350 Gs300
- WebNameShort: Front Left Lower Suspension Control Arm Tor-ca1215 For Lexus Is250 Is300 Is350 Gs350 Gs300
- ComponentsSummaryRegular: Suspension Control Arm
- WebNameRegular: Tor Front Left (driver Side) Lower Suspension Control Arm Tor-ca1215 For Lexus Is250 Is300 Is350 Gs350 Gs300
- WebNameEbay2: [front Left Lower] Suspension Control Arm Tor-ca1215 For Lexus Is250 Is300 Is350
- WebNameEbay3: Suspension Control Arm Front Left Lower Tor-ca1215 For Lexus Is250 Is300 Is350
- WebNameEbay: Front Left Lower Suspension Control Arm For Lexus Is250 Is300 Is350 Gs350 Gs300
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK643680 CA64063PR CA64063 MS861132 GS861132 CMS861132 CK643680 K643680 RK643680 1231168 2607905 4864030300 CP5589 CA1215
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2607905, 4864030300, 528-091, CA64063, CA64063PR, CMS861132, CP5589, GS861132, MS861132, N/A, RK643680
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Lexus IS350 | Front Left Lower | AWD |
Showing 1 - 10 of 11 products
Loading...