Image
Product
Price
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre-converter
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280376
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280376. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2018-2024 Nissan Kicks and 2020-2024 Nissan Versa, this direct-fit catalytic converter also interchanges with OE part 200A0-5RL6A. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
200A0-5RL6A
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - Nissan Kicks | L | 1598 | 4 Cyl 1.6L | 98 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Incl.Pedal Assy.
- Pedal and Sensor Assembly
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Nissan Kicks |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 15208-65F0E Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 265
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 11-14
- Flow Rate: 8-10 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 292, 0 451 104 068, 0 451 104 509, 0 986 452 061, 0 986 452 605, 0 986 452 614, 0 986 AF0 063, 0 986 AF0 203, 0 986 AF1 014, 0 986 AF1 039, 0 986 AF1 058, 0 986 AF1 070, 0 986 AF1 148, 0 986 AF1 189, 1358, 180, 21358, 31358...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2022 - Nissan Kicks | L | 1598 | Canada | 4 Cyl 1.6L | 98 |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 15208-65F0E Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 265
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 11-14
- Flow Rate: 8-10 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 292, 0 451 104 068, 0 451 104 509, 0 986 452 061, 0 986 452 605, 0 986 452 614, 0 986 AF0 063, 0 986 AF0 203, 0 986 AF1 014, 0 986 AF1 039, 0 986 AF1 058, 0 986 AF1 070, 0 986 AF1 148, 0 986 AF1 189, 1358, 180, 21358, 31358...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2022 - Nissan Kicks | L | 1598 | Canada | 4 Cyl 1.6L | 98 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Nissan Kicks |
- NGK Ruthenium HX High Ignitability Spark Plug
- Gap 0.044"
- Ruthenium HX High Ignitability Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Lkar6ahx
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Lkar6ahx
- Resistor Type: Yes
- Stock Number: 97292
- Ground Electrode Tip Design: Dual Fine Electrode (dfe) - High Ignitability
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Ruthenium
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14mm
- Reach:
- 1.043
- 26.5
- Center Electrode Tip Material: Ruthenium
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.472
- 12.0
-
Features:
- RUTHENIUM ALLOY CENTER ELECTRODE: NGK's patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
- HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
11182-82Z01, 19316339, 22401-1HC1B, 22401-CK81B, 22401-EA015, 22401-JA01B, 22401-JD01B, 97292
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - Nissan Kicks | L | 1598 | 4 Cyl 1.6L | 98 |
- Suspension Stabilizer Bar Link Kit For Nissan Versa Kicks Micra Note Cube
- Top Quality Suspension Stabilizer Bar Link Kit 72-K750098 For Nissan Versa Kicks Micra Note Cube
- Top Quality
- Product Attributes:
- WebNameEbay4: For Nissan Versa Kicks Micra Note Suspension Stabilizer Bar Link Kit 72-k750098
- ComponentsSummaryRegularWithBrands: Top Quality Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: Suspension Stabilizer Bar Link Kit
- ComponentsSummaryLongWithBrands: 1x Front Top Quality Suspension Stabilizer Bar Link Kit
- WebNamePlain: Top Quality Suspension Stabilizer Bar Link Kit 72-k750098
- ComponentsSummaryShortWithBrands: Top Quality Suspension Stabilizer Bar Link Kit
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Suspension Stabilizer Bar Link Kit
- WebNameLong: Top Quality Suspension Stabilizer Bar Link Kit 72-k750098 For Nissan Versa Kicks Micra Note Cube
- WebNameShort: Suspension Stabilizer Bar Link Kit 72-k750098 For Nissan Versa Kicks Micra Note Cube
- ComponentsSummaryRegular: Suspension Stabilizer Bar Link Kit
- WebNameRegular: Top Quality Suspension Stabilizer Bar Link Kit 72-k750098 For Nissan Versa Kicks Micra Note Cube
- WebNameEbay2: Suspension Stabilizer Bar Link Kit 72-k750098 For Nissan Versa Kicks Micra
- WebNameEbay3: Suspension Stabilizer Bar Link Kit 72-k750098 For Nissan Versa Kicks Micra Note
- WebNameEbay: Suspension Stabilizer Bar Link Kit For Nissan Versa Kicks Micra Note Cube
-
Features:
- TQ USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- TQ steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : SL69125PR SL69475XL SL69125XL SL69475PR SL69125 SL69475 GS30844 GS30899 MS30844 MS30899 K750098 1830899 2653084 TK750098
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
This Part Fits the Following OEM/Substitute Numbers:
1030777, 1830899, 2653084, 536-048, 545-1798, 58280051, GS30844, GS30899, K750098, MS30844, MS30899, SL69125, SL69125XL, SL69475, SL69475PR, TK750098
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Nissan Kicks | Front |
- Suspension Stabilizer Bar Link Kit For Nissan Versa Kicks Micra Note Cube
- TOR Suspension Stabilizer Bar Link Kit TOR-K750098 For Nissan Versa Kicks Micra Note Cube
- TOR
- Product Attributes:
- WebNameEbay4: For Nissan Versa Kicks Micra Note Suspension Stabilizer Bar Link Kit Tor-k750098
- ComponentsSummaryRegularWithBrands: Tor Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: Suspension Stabilizer Bar Link Kit
- ComponentsSummaryLongWithBrands: 1x Front Tor Suspension Stabilizer Bar Link Kit
- WebNamePlain: Tor Suspension Stabilizer Bar Link Kit Tor-k750098
- ComponentsSummaryShortWithBrands: Tor Suspension Stabilizer Bar Link Kit
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Front Suspension Stabilizer Bar Link Kit
- WebNameLong: Tor Suspension Stabilizer Bar Link Kit Tor-k750098 For Nissan Versa Kicks Micra Note Cube
- WebNameShort: Suspension Stabilizer Bar Link Kit Tor-k750098 For Nissan Versa Kicks Micra Note Cube
- ComponentsSummaryRegular: Suspension Stabilizer Bar Link Kit
- WebNameRegular: Tor Suspension Stabilizer Bar Link Kit Tor-k750098 For Nissan Versa Kicks Micra Note Cube
- WebNameEbay2: Suspension Stabilizer Bar Link Kit Tor-k750098 For Nissan Versa Kicks Micra
- WebNameEbay3: Suspension Stabilizer Bar Link Kit Tor-k750098 For Nissan Versa Kicks Micra Note
- WebNameEbay: Suspension Stabilizer Bar Link Kit For Nissan Versa Kicks Micra Note Cube
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK750098 SL69125PR SL69475XL SL69125XL SL69475PR SL69125 SL69475 GS30844 GS30899 MS30844 MS30899 K750098 1830899 2653084 TK750098
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
1030777, 1830899, 2653084, 536-048, 545-1798, 58280051, GS30844, GS30899, K750098, MS30844, MS30899, SL69125, SL69125XL, SL69475, SL69475PR, TK750098
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Nissan Kicks | Front |
- Front Suspension Stabilizer Bar Link Pair For Nissan Versa Kicks Micra Note Cub
- TOR Front Suspension Stabilizer Bar Link Pair For Nissan Versa Kicks Micra Note Cube - Left Right Side (Driver Passenger) KTR-100700
- TOR
- Product Attributes:
- WebNameEbay4: For Nissan Versa Kicks Micra Note Cube Front Suspension Stabilizer Bar Link Pair
- ComponentsSummaryRegularWithBrands: 2x Tor Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: 2x Link Kit
- ComponentsSummaryLongWithBrands: 2x Front Tor Suspension Stabilizer Bar Link Kit (both Side)
- WebNamePlain: Tor Front Suspension Stabilizer Bar Link Pair Ktr-100700
- ComponentsSummaryShortWithBrands: 2x Tor Link Kit
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Front Suspension Stabilizer Bar Link Kit (both Side)
- WebNameLong: Tor Front Suspension Stabilizer Bar Link Pair For Nissan Versa Kicks Micra Note Cube - Left Right Side (driver Passenger) Ktr-100700
- WebNameShort: Front Suspension Stabilizer Bar Link Pair For Nissan Versa Kicks Micra Note Cube Ktr-100700
- ComponentsSummaryRegular: 2x Suspension Stabilizer Bar Link Kit
- WebNameRegular: Tor Front Suspension Stabilizer Bar Link Pair For Nissan Versa Kicks Micra Note Cube - Left Right Side (driver Passenger) Ktr-100700
- WebNameEbay2: [front] Suspension Sway Bar Link Pair For Nissan Versa Kicks Micra Note Cube
- WebNameEbay3: Suspension Stabilizer Bar Link Front Pair For Nissan Versa Kicks Micra Note Cube
- WebNameEbay: Front Suspension Stabilizer Bar Link Pair For Nissan Versa Kicks Micra Note Cube
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK750098 SL69125PR SL69475XL SL69125XL SL69475PR SL69125 SL69475 GS30844 GS30899 MS30844 MS30899 K750098 1830899 2653084 TK750098
- Kit Includes: 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
- Part Reference Numbers : BK750098 SL69125PR SL69475XL SL69125XL SL69475PR SL69125 SL69475 GS30844 GS30899 MS30844 MS30899 K750098 1830899 2653084 TK750098
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
1030777, 1830899, 2653084, 536-048, 545-1798, 58280051, GS30844, K750098, MS30844, SL69125, TK750098
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Nissan Kicks | Front |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 15208-65F0E Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 265
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 11-14
- Flow Rate: 8-10 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- WIX HD Oil Filters provide superior engine protection with high quality, high capacity media for applications such as medium and heavy trucks, farm, construction, mining, and other equipment. WIX filters are recommended for OEM oil and filter change intervals. High strength, corrosion-resistant cans, center tubes, and end caps with superior sealing components ensure a leak resistant, long-lasting, high performing oil filter under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 292, 0 451 104 068, 0 451 104 509, 0 986 452 061, 0 986 452 605, 0 986 452 614, 0 986 AF0 063, 0 986 AF0 203, 0 986 AF1 014, 0 986 AF1 039, 0 986 AF1 058, 0 986 AF1 070, 0 986 AF1 148, 0 986 AF1 189, 0 B631 14 302, 0 FE3R 14 302, 0222-14300, 02971114...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2022 - Nissan Kicks | L | 1598 | Canada | 4 Cyl 1.6L | 98 |
Showing 1 - 10 of 14 products
Loading...