Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Hyundai Santa Cruz |
- CURT 13486 Class 3 Trailer Hitch; 2-Inch Receiver; Compatible with Select Hyunda
- 5000 lbs. Gross Trailer Weight; 750 lbs. Tongue Weight; Gloss Black Powder Coat
- CURT 13486 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Hyundai Santa Cruz
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
-
Features:
- Rated To 4000 lbs. Gross Trailer Weight And 400 lbs. TW
- Engineered w/A Vehicle-Specific Design For A Custom Fit
- Concealed Main Body For OE Look And Seamless Integration
- Tested For Safety In Accordance With SAE J686
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid A-Coat Inside And Out
- Equipped With An Open-Back Receiver For Easy Cleaning
- Limited Lifetime Warranty
- Made In USA
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Santa Cruz (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Hyundai Santa Cruz | Rear |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head M14 x 1.50 Thread Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Método de drenaje: Tradicional
- Threads Per Inch: 0
- SAE or Metric:
- Metric
- Métrico
- Magnetic:
- No
- Non
- Thread Pitch: 1.5
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 5.8
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- Gasket
- Junta
- Color:
- Plateado
- Silver
- Socket Points: M6 -1.0
- Head Tool Size: 16 Mm
- Thread Diameter: 14
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Hyundai Santa Cruz | L | 2497 | 4 Cyl 2.5L | - |
- EIB Pro-Alignment Kits
- Eibach Pro-Alignment Front Kit for 06-08 Eclipse / 02-05 Civic / 02-06 Civic CR-V / 02-04 RSX
- RSX & RSX S-Type start VIN2C003184.
- 3279
- Product Attributes:
- Adjustable Camber: Yes
-
Features:
- Precision Alignment Camber Bolt Kit for Maximum Performance.
- Prevents Uneven Tire Wear.
- Wider Range of Camber Adjustment-Suitable for Street or Track Tuning
- Alignment kits are necessary when lifting or lowering vehicles because changes in the height of a vehicle can affect the alignment of its wheels. If a vehicle is lowered or lifted beyond a certain point, factory alignment specifications will not be achievable which can negatively effect handling. These alignment kits not only allow the adjustment of a vehicle’s camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to achieve a more performance-oriented alignment.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2024 - Hyundai Santa Cruz | L | 2497 | 4 Cyl 2.5L | AWD | - |
- EIB Pro-Alignment Kits
- Eibach Pro-Alignment Front Kit for 06-08 Eclipse / 02-05 Civic / 02-06 Civic CR-V / 02-04 RSX
- RSX & RSX S-Type start VIN2C003184.
- 3449
- Product Attributes:
- Adjustable Camber: Yes
-
Features:
- Precision Alignment Camber Bolt Kit for Maximum Performance.
- Prevents Uneven Tire Wear.
- Wider Range of Camber Adjustment-Suitable for Street or Track Tuning
- Alignment kits are necessary when lifting or lowering vehicles because changes in the height of a vehicle can affect the alignment of its wheels. If a vehicle is lowered or lifted beyond a certain point, factory alignment specifications will not be achievable which can negatively effect handling. These alignment kits not only allow the adjustment of a vehicle’s camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to achieve a more performance-oriented alignment.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2024 - Hyundai Santa Cruz | L | 2497 | 4 Cyl 2.5L | FWD | - |
Showing 1 - 5 of 5 products
Loading...