Shop By Product Matching "280"
Choose your Submodel for your 2025 Toyota 4Runner
Image
Product
Price
- WIX Spin-On Lube Filter
- Original Equipment Part Number 90915-TA001 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 400
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 986 452 017, 0 986 452 028, 0 986 452 035, 0 986 452 038, 0 986 452 060, 0 986 452 558, 0 986 452 907, 0 986 452 917, 0 986 452 928, 0 986 AF0 061, 0 986 AF0 149, 0 986 AF1 028, 0 986 B00 048, 0060290915005, 0082115, 0410670, 0410750, 0410759...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2025 - Toyota 4Runner | L | 2393 | Canada | 4 Cyl 2.4L | 146 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2025 - Toyota 4Runner |
- 1.5-2 in. Lift; Front; Includes Strut Spacer/Strut Shims/Hardware
- Leveling Kit; 1.5-2 in. Lift; Front; Includes Strut Spacer/Strut Shims/Hardware;
- Leveling Kit
- Product Attributes:
- Lift/Drop Height:
- 1.5 In.
- 2 In.
- Lift/Drop Height:
-
Features:
- Provides Approximately 1.5 in./2 in. Of Lift For A More Aggressive Stance
- Easy Bolt-On Design For A Quick And Straightforward Upgrade
- Increased Ground Clearance Enhances Off-Road Capability
- Maintains Factory Ride Quality For A Comfortable Drive
- Levels The Front with The Rear For A Uniform Look
- Retains Factory Alignment Specs To Ensure Proper Handling
- You finally got your hands on the sixth-generation 4Runner, but that stock ride height just wont cut it-especially when adventure calls. Get the lift you need, level your stance, and take on any terrain with confidence using the Rough Country Leveling Kit.Boost Your Ride Height: Elevate your 4Runner with approximately 1.5 in.-2 in. of lift, giving it a more aggressive stance and improved off-road capability.Hassle-Free Install: No need for complicated modifications-our easy bolt-on design makes installation quick and straightforward.Tackle Tough Terrain: Increased ground clearance means better approach angles and the ability to conquer rough trails like a pro.Smooth & Stable: Love how your 4Runner handles? So do we. Our kit maintains the factory ride quality, so you get the lift without losing comfort.Balanced & Level: Say goodbye to that nose-down look. This kit ensures your front end sits perfectly level with the rear for a clean, aggressive stance.Precision Engineering: Retains factory alignment specs, ensuring proper handling and performance without additional modifications.Dont settle for stock when you can enjoy the benefits of increased ground clearance, a level stance, and a smooth ride-all in one easy upgrade. Take your 4Runner to the next level with the Rough Country Leveling Kit today!
Additional Fitment Information:
| Vehicle |
|---|
| 2025 - Toyota 4Runner |
Showing 1 - 3 of 3 products
Loading...