Shop By Product Matching "4000"

Choose your Submodel for your 2004 Toyota Highlander


Showing 1 - 10 of 40 products
Image
SKU
Product
Rating
Price

Sportz
  • Sportz SUV Tent (with screen room)
  • Napier Sportz SUV Tent with Screen Room
  • The Sportz SUV Tent connects to the cargo area of your vehicle and with an extra 6? x 7? screen room; you can eat, play, and enjoy the great outdoors bug-free!

Additional Fitment Information:
Vehicle Body
2004 - Toyota Highlander Sport Utility

Sportz
  • Sportz SUV Tent (with screen room)
  • Napier Sportz SUV Tent with Screen Room
  • The Sportz SUV Tent connects to the cargo area of your vehicle and with an extra 6? x 7? screen room; you can eat, play, and enjoy the great outdoors bug-free!

Additional Fitment Information:
Vehicle Body
2004 - Toyota Highlander Sport Utility

Putco
  • Set of Two; Bulb Type 194/921
  • Plug And Play Resistor System; Set of Two; Bulb Type 194/921;
  • Plug And Play Resistor System
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
  • Features:
    • Emits Light In A Full 360 Pattern
    • 15 LED Chips Per Bulb
    • Unrivaled Plug And Play Performance
    • Error Free Performance w/CANBUS
    • Will Not Trigger Warning Lights
    • Features A Copper Core
    • Efficient Heat Control
    • Powerful Light Output
    • Large Base Series
    • Solid Aluminum Frame

Additional Fitment Information:
Vehicle
2004 - Toyota Highlander

Dayco
  • w/Rear Air
  • Small I.D. Heater Hose
  • Product Attributes:
    • : .63
    • Centerline Length: 14
    • End 1 Inside Diameter: .63
    • Type: Single

This Part Fits the Following OEM/Substitute Numbers:
11143, 11410, 16248M, 16394M, 19143, 19410, 63989, 79721-SV4-000, 87245-48600, E87888

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Toyota Highlander L 2362 Bypass To Tee 4 Cyl 2.4L -

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number 04152-64010 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 2.921
    • Burst Pressure: 275
    • Duty Type: Ld
    • Micron: 21.00
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Flow Rate: 7-9 Gpm
    • Media Material: Enhanced Cellulose
    • Class: A
    • Anti-Drain Back Valve: Yes
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.

This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2004 - Toyota Highlander V 3300 Canada 6 Cyl 3.3L -

Wagner Lighting
  • Standard Multi-Purpose Light Bulb Box of 1
  • Boxed Product Halogen
  • Wagner Standard 9005 Standard Multi-Purpose Light Bulb Box of 1
  • Product Attributes:
    • Bulb Color: Clear
    • Filament Type: C-8
    • Voltage: 12.800
    • Wattage: 65.000
    • Filament Quantity: 1
    • Amperage Rating: 5.080
    • Brightness: 136.000
    • Bulb Base Type: Right Angle Special
    • Bulb Type: T-4 Bulb 1/2 (13mm) Dia
  • Features:
    • SHINES BRIGHT -- Brighter, whiter light than incandescent lighting
    • HIGH QUALITY -- High-grade filament and glass delivers quality performance
    • DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
    • COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
    • REPLACE IN PAIRS -- For optimal performance and visibility on the road, replace headlights in pairs
  • Count on Wagner® halogen capsules for superior performance for automotive lighting. Equipped with high-grade filament and glass, Wagner halogen capsules deliver brighter, whiter light than incandescent lighting.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
09441732, 18649-65009, 1864965009, 9005, 9005C1, 9005LL, 90981-13046, 9098113046, 9441732, CJ5Z13N021A, E9SZ13N021B, HB3/9005

Additional Fitment Information:
Vehicle Position
2004 - Toyota Highlander High Beam

CURT
  • Class 3 Hitch; 2in. Receiver; Select Toyota Highlander; Lexus RX330; RX350; RX40
  • 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 4000lbs. Weight Distributing; 400lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 20 Minutes
  • CURT 13530 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Highlander; Lexus RX330; RX350; RX400h
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 3500 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 3500
    • WD Tongue Weight: 400
    • Install Time: 20 Minutes
    • WC Tongue Weight: 350
    • Weight Distribution: 4000
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Highlander and Lexus RX330, RX350 and RX400h (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2004 - Toyota Highlander L 2362 Rear 4 Cyl 2.4L -

Wagner Lighting
  • Standard Multi-Purpose Light Bulb Box of 10
  • Boxed Product; Miniature Lamp
  • Wagner Standard 168 Standard Multi-Purpose Light Bulb Box of 10
  • Product Attributes:
    • Bulb Color: Clear
    • Filament Type: C-2f
    • Average Rated Life: 1500
    • Voltage: 14.000
    • Wattage: 4.900
    • Filament Quantity: 1
    • Amperage Rating: 0.350
    • Brightness: 3.000
    • Bulb Base Type: Wedge
    • Bulb Type: T-3 1/4 Bulb 13/32 (10mm) Dia
  • Features:
    • MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
    • BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
    • HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
    • DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
    • COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
  • Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
  • This item must be purchased in quantities of 10

Additional Fitment Information:
Vehicle
2004 - Toyota Highlander

Wagner Lighting
  • Standard Multi-Purpose Light Bulb Box of 10
  • Boxed Product; Miniature Lamp
  • Wagner Standard 168 Standard Multi-Purpose Light Bulb Box of 10
  • Product Attributes:
    • Bulb Color: Clear
    • Filament Type: C-2f
    • Average Rated Life: 1500
    • Voltage: 14.000
    • Wattage: 4.900
    • Filament Quantity: 1
    • Amperage Rating: 0.350
    • Brightness: 3.000
    • Bulb Base Type: Wedge
    • Bulb Type: T-3 1/4 Bulb 13/32 (10mm) Dia
  • Features:
    • MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
    • BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
    • HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
    • DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
    • COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
  • Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
  • This item must be purchased in quantities of 10

This Part Fits the Following OEM/Substitute Numbers:
0K2AA51B49, 0K2BA51B05, 0K53E5141A, 110168, 11016822, 11079451, 168, 168CP, 1821940530, 1821940540, 1864305009, 1864305009E, 1864305009L, 1864305009N, 1NL847440000, 1WDH43470000, 1WDH47440000, 2123313...VIEW MORE

Additional Fitment Information:
Vehicle
2004 - Toyota Highlander
Showing 1 - 10 of 40 products

Loading...