Shop By Product Matching "5500"

Choose your Submodel for your 1983 Ford Ranger


Showing 1 - 10 of 11 products
Image
SKU
Product
Rating
Price

Husky Liners
  • Rubber Front Mud Flaps-12IN w/o Weight
  • Black; 12 in.; Rubber; w/o Weight; 2 piece
  • MD FR MUD FLAPS-12IN W/O WGHT
  • MudDog Mud Flaps
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Made In The USA
    • Lifetime Guarantee
    • Designed To Fit Almost Any Truck
    • Built To Withstand Whatever The Road Throws Their Way
    • Installation Is A Snap
    • Stainless Steel Accent Or Matte Black Finish
  • MudDog Mud Flaps are a breed apart. Not only do they look better than the other mutts, they're made from an impact resistant, tough and flexible material. The universal design will fit almost any truck and they're eaaaaaasy to install. You'll be on the road to off-roading in no time.

Additional Fitment Information:
Vehicle Position
1983 - Ford Ranger Front

Hellwig
  • EZ-550 Helper Spring Kit
  • Up to 550 lbs. load assist; 2 and 4 wheel drive;Do Not Use with Composite Springs
  • EZ-550 Helper Spring Kit for Various Truck Makes and Models. See Vehicle Fitment
  • Hellwig's light-duty EZ-550 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 500 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.

Additional Fitment Information:
Vehicle
1983 - Ford Ranger

Wix
  • WIX Spin-On Lube Filter
  • Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Burst Pressure: 290
    • Duty Type: Ld
    • Bypass Relief Valve Setting: 8-11
    • Flow Rate: 7-9 Gpm
    • Media Material: Synthetic
    • Class: A
    • Outlet: 0.00
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1983 - Ford Ranger L - Canada 4 Cyl 2.3L 140

Wix
  • WIX Spin-On Lube Filter
  • Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1983 - Ford Ranger L - Canada 4 Cyl 2.3L 140

Fram
  • FRAM, PH8A, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Reusable: No
    • Grade Type: Regular
    • Replacable Filter: Yes
    • Gasket Inside Diameter: 2.422
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.203
    • Torque Nut: No
    • Attachment Type: Spin-on
    • Burst Pressure: 230.000
    • Gasket Type: Base
    • Housing Color: Orange
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 12.000
    • Grade: Advanced
    • Gasket Outside Diameter: 2.797
    • Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • Features:
    • Silicone anti-drain back valve helps ensure safe engine start up
    • SureGrip® technology for easy install and removal
    • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
  • FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).

This Part Fits the Following OEM/Substitute Numbers:
000-983-0607, 00120-00001, 00120-00012, 02-7088230, 041-0745, 041-8159, 041-8756, 1-5360, 1-829195, 1-8A, 10-00041, 10-00074, 10-00132, 10-00280, 10-00314, 10-00520, 10-00967, 10-50132...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Ford Ranger L - 4 Cyl 2.3L 140

Pro-Tec
  • PROTEC-NEW Spin-On Lube Filter
  • Also Available In Master Pack Version Also Available In Master Pack Version
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 0410365, 0410423, 0410563, 0418038, 0418159, 0451103325, 0451104065, 1 986 452 001, 1 986 452 002...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1983 - Ford Ranger L - Canada 4 Cyl 2.3L 140

Dayco
  • Product Attributes:
    • Top Width: .44
    • Outside Circumference:
      • 1157.48
      • 45.57
    • Color: Black
    • Banded Belt: N
    • Standards: Sae J636, Sae J637
    • Effective Length:
      • 1143.00
      • 45
    • Belt Construction: Bottom Cog
    • Minimum Operating Temperature:
      • -35
      • -37.2
    • Material: Synthetic Rubber Compound
    • Maximum Operating Temperature:
      • 175
      • 79.4

This Part Fits the Following OEM/Substitute Numbers:
10034695, 10A1145, 11720-P801001, 118671, 1264036, 13-452, 13-542, 13450, 13451, 1374979, 14017797, 14054477, 14064191, 14072731, 14092344, 15-450, 15-456, 15447M...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1983 - Ford Ranger L - Fan and Alternator 4 Cyl 2.2L 134

Derale
  • 1/2" Aluminum Belt Fan Spacer
  • 1/2" length with 5/8" female pilot
  • 1/2" Aluminum Belt Fan Spacer
  • Derale 1/2" Fan Spacer Kit
  • Product Attributes:
    • Male pilot diameter: 5/8
    • Female pilot diameter: 5/8
    • Flange bolt spacing: 1-3/4-2-1/4
  • Features:
    • 1/2" Aluminum Belt Fan Spacer
  • This 1/2" belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8" pilot water pumps.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1983 - Ford Ranger L - 4 Cyl 2.3L XLT 140

National Bearing
  • Taper Bearing Set Includes Cup and Cone
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
001 980 62 02, 001 980 63 02, 001 981 62 02, 001 981 63 02, 0079811305, 012-409-123, 016-409-123, 016-409-123A, 016-409-123B, 016-409-399, 018-409-123, 01937770, 01E-409-123, 01X-409-123, 03712762, 05103779AA, 088-409-123, 102729A...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
1983 - Ford Ranger Front Inner 4WD

Husky Liners
  • Rubber Front Mud Flaps-12IN w/Weight
  • Black; 12 in.; Rubber; w/Weight; 2 piece
  • MD FR MUD FLAPS-12IN W/WGHT
  • MudDog Mud Flaps
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Made In The USA
    • Lifetime Guarantee
    • Designed To Fit Almost Any Truck
    • Built To Withstand Whatever The Road Throws Their Way
    • Installation Is A Snap
    • Stainless Steel Accent Or Matte Black Finish
  • MudDog Mud Flaps are a breed apart. Not only do they look better than the other mutts, they're made from an impact resistant, tough and flexible material. The universal design will fit almost any truck and they're eaaaaaasy to install. You'll be on the road to off-roading in no time.

Additional Fitment Information:
Vehicle Position
1983 - Ford Ranger Front
Showing 1 - 10 of 11 products

Loading...