Shop By Product Matching "5500"

Showing 1 - 7 of 7 products
Image
SKU
Product
Rating
Price

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number 15208-AA020 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.15
    • Burst Pressure: 280
    • Duty Type: Ld
    • Micron: 21.00
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Flow Rate: 9-11 Gpm
    • Media Material: Enhanced Cellulose
    • Class: A
    • Anti-Drain Back Valve: Yes
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.

This Part Fits the Following OEM/Substitute Numbers:
8-97140-666-0, 0 451 103 275, 0 451 103 316, 0 986 452 006, 0 986 452 007, 0 986 452 016, 0 986 452 036, 0 986 452 059, 0 986 452 916, 0 986 AF0 047, 0 986 AF0 064, 0 986 AF1 038, 0 986 AF1 093, 0 986 AF1 181, 0 RF03 23 802, 0 RF03 23802A, 000.14.145, 0116331...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1995 - Subaru SVX H 3318 Canada 6 Cyl 3.3L -

Wagner Lighting
  • Standard Multi-Purpose Light Bulb Card of 1
  • Blister Pack; Halogen Capsule
  • Wagner Standard BP1255/H3 Multi-Purpose Light Bulb Card of 1
  • Product Attributes:
    • Bulb Color: Clear
    • Bulb Type: T-3 1/4 Bulb 13/32 (10mm) Dia
  • Features:
    • SHINES BRIGHT -- Brighter, whiter light than incandescent lighting
    • HIGH QUALITY -- High-grade filament and glass delivers quality performance
    • DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
    • COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
    • REPLACE IN PAIRS -- For optimal performance and visibility on the road, replace headlights in pairs
  • Count on Wagner® halogen capsules for superior performance for automotive lighting. Equipped with high-grade filament and glass, Wagner halogen capsules deliver brighter, whiter light than incandescent lighting.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
01007, 01007BP, 11513798, 12336B1, 1255/H3, 18647-55004, 1864755004, 33165-SB0-731, 33165SB0731, 34908SA0811, 565462360071, 90981-13048, 9098113048, BP1255H3, E7ZZ13466C, H3, H3-55/BP, H3.BP...VIEW MORE

Additional Fitment Information:
Vehicle Position
1995 - Subaru SVX Front

Wagner Lighting
  • Standard Multi-Purpose Light Bulb Box of 1
  • Boxed Product Halogen
  • Wagner Standard 9006 Standard Multi-Purpose Light Bulb Box of 1
  • Product Attributes:
    • Bulb Color: Clear
    • Filament Type: C-8
    • Voltage: 12.800
    • Wattage: 55.000
    • Filament Quantity: 1
    • Amperage Rating: 4.300
    • Brightness: 80.000
    • Bulb Base Type: Right Angle Special
    • Bulb Type: T-4 Bulb 1/2 (13mm) Dia
  • Features:
    • SHINES BRIGHT -- Brighter, whiter light than incandescent lighting
    • HIGH QUALITY -- High-grade filament and glass delivers quality performance
    • DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
    • COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
    • REPLACE IN PAIRS -- For optimal performance and visibility on the road, replace headlights in pairs
  • Count on Wagner® halogen capsules for superior performance for automotive lighting. Equipped with high-grade filament and glass, Wagner halogen capsules deliver brighter, whiter light than incandescent lighting.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
00234-H9006, 00234H9006, 05182000AA, 119006, 14211501701, 143165, 18649-55009, 1864955009, 19257054, 1999366, 1K6617332, 2629660U02, 262967S001, 2629689910, 2629689911, 2629689913, 2629689918, 2629689921...VIEW MORE

Additional Fitment Information:
Vehicle Position
1995 - Subaru SVX Low Beam

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 3
    • Body Height: 3
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: No
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Spun
    • Inlet Inside Diameter: 2
    • Substrate Material: Metallic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru SVX H 3318 Front Left 6 Cyl 3.3L -

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 3
    • Body Height: 3
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: No
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Spun
    • Inlet Inside Diameter: 2
    • Substrate Material: Metallic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru SVX H 3318 Front Right 6 Cyl 3.3L -

Magnaflow
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 3
    • Body Height: 3
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Finish: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Series: Standard Grade
    • Heat Shield Attached: No
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Spun
    • Inlet Inside Diameter: 2
    • Substrate Material: Metallic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Prop 65 Y/N: No
    • Sensor Port Count: 0
    • Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 50004
  • Features:
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru SVX H 3318 Front Left 6 Cyl 3.3L -

Magnaflow
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 3
    • Body Height: 3
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Finish: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Series: Standard Grade
    • Heat Shield Attached: No
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Spun
    • Inlet Inside Diameter: 2
    • Substrate Material: Metallic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Prop 65 Y/N: No
    • Sensor Port Count: 0
    • Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 50004
  • Features:
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru SVX H 3318 Front Right 6 Cyl 3.3L -
Showing 1 - 7 of 7 products

Loading...