Image
Product
Price
- w/o A.C.
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1119.38
- 44.07
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1104.90
- 43.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
02-7106055, 11A1105, 13-435, 13434, 13435, 13438, 13440, 1374978, 14058790, 15-435, 15-437, 15-443, 15435, 15440, 15443, 1555585, 1565407, 15W435L...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1972 - Oldsmobile Cutlass | V | 7456 | Fan and Power Steering | 8 Cyl 7.5L | 455 |
- w/A.C.
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1170.18
- 46.07
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1155.70
- 45.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
11A1155, 1232791, 1255243, 13-454, 13454, 13455, 13458, 14050459, 14072009, 14079251, 14087507, 141-0489, 141-1201, 1490919, 1494934, 15-455, 15-461, 15453...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1972 - Oldsmobile Cutlass | V | 7456 | Fan and Power Steering | 8 Cyl 7.5L | 455 |
- Coil Spring Set
- Variable Rate
- MOOG CC501 Coil Spring Set for Chevrolet Chevelle
- Product Attributes:
- Rear Spring Relaxed Length:
- 12.63
- 320.80
- Wire Diameter:
- 0.61
- 15.50
- Free Height - MM: 320.80
- Bar Diameter - MM: 15.50
- Rear Spring Compressed Length:
- 203.20
- 8.00
- End 1 Type: Pigtail
- Free Height - Inches: 12.63
- Spring Rate - lbs per inch: 175.00
- ID - Inches: 5.53
- ID - MM: 140.50
- Spring Color: Black
- Bar Diameter - Inches: 0.61
- End 2 Type: Pigtail
- Load - lbs: 810.00
- Installation Height - Inches: 8.00
- Rear Spring Outside Diameter: 6.750
- Installation Height - MM: 203.20
- Part Description: Coil Spring Set
- Spring Type: Variable Rate
- Rear Spring Relaxed Length:
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
110104, 110217, 277-5164, 277-5383, 4412130, 45H3006, 45H3095, 591-1006, 5911095, 630.66037, 64007, 64039, 832-501, 832-509, 91-0501, CC501, CC509, RCS501V...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|---|
| 1972 - Oldsmobile Cutlass | V | 5733 | Rear | 2 | 8 Cyl 5.7L | S | Coupe | 350 |
- W/A.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1164
- 45.82
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1143
- 45
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
005455, 0106400, 02028380, 0221599890, 0226405, 027017645, 03-02-501-2, 0337303, 0337304, 0400030, 053536, 0545350, 0609230, 09433743, 0TX10276, 10-01817, 1001390, 10019362...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1972 - Oldsmobile Cutlass | V | - | Fan and Power Steering | GAS | 8 Cyl 7.5L | 455 |
- W/A.C.; W/X.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1164
- 45.82
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1143
- 45
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1972 - Oldsmobile Cutlass | V | - | Fan and Power Steering | GAS | 8 Cyl 5.7L | 350 |
- Magnetic
- Oil Pan Drain Plug; Magnetic;
- Oil Pan Drain Plug
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Accumulates Metal Particles
- Prevents Possible Damage
- Rare Earth Magnetic drain plug accumulates metal particles, preventing possible engine damage. Includes rubber seal washer. 1/2-20 thread.
Additional Fitment Information:
| Vehicle |
|---|
| 1972 - Oldsmobile Cutlass |
- Magnetic
- Oil Pan Drain Plug; Magnetic;
- Oil Pan Drain Plug
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Accumulates Metal Particles
- Prevents Possible Damage
- Rare Earth Magnetic drain plug accumulates metal particles, preventing possible engine damage. Includes rubber seal washer. 1/2-20 thread.
Additional Fitment Information:
| Vehicle |
|---|
| 1972 - Oldsmobile Cutlass |
- Fits Pontiac And Oldsmobile V8
- High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:166-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- Black Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 11 : 1
- Make: Gm
- Finish: Natural
- Category: High-torque Starter
- Power Output: 1.4 Kw
- Applications: Pontiac And Oldsmobile Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Flywheel Tooth Number: 166-tooth
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Oldsmobile Cutlass | V | - | 8 Cyl 5.7L | 350 |
- Fits Pontiac And Oldsmobile V8
- High-Torque Starter Gear Reduction Type 1.4KW Compression Ratio: 11:1 Finish: Natural Flywheel Tooth Number: 166-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Straight Bolt Mounting Plate
- Black Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 11 : 1
- Make: Gm
- Finish: Natural
- Category: High-torque Starter
- Power Output: 1.4 Kw
- Applications: Pontiac And Oldsmobile Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Flywheel Tooth Number: 166-tooth
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Oldsmobile Cutlass | V | - | 8 Cyl 5.7L | 350 |
- Fixed Length End Link Set
- Fixed Length End Link Set; Red; L-2 7/8 in.;
- Red; L-2 7/8 in.
- Product Attributes:
- Prop 65 Warning Label: P65.png
- Prop 65 (C, R or CR): Cr
-
Features:
- Lasts Much Longer Than OEM Rubber End Links
- Made From HYPER-Flex Polyurethane
- Allows Vehicle To Work At Maximum Efficiency
- Easy To Install
- Superior Performance And Greater Longevity
- Made of high durometer, very firm, Hyper-Flex(TM) performance polyurethane. They're economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Oldsmobile Cutlass | Front |
Showing 1 - 10 of 46 products
Loading...