Shop By Product Matching "AE"

Showing 1 - 10 of 12 products
Image
SKU
Product
Rating
Price

NGK
  • NGK G-Power Platinum Spark Plug
  • Gap 0.036"
  • G-Power Spark Plug
  • Product Attributes:
    • Center Electrode Design: Fine Wire
    • Center Electrode Insulator Tip Projection:
      • 0.12
      • 3.0
    • Washer Included: Yes
    • Electrical Terminal Type: Removable Nut
    • Grade Type: Standard Replacement
    • Service Number: Bpr6egp
    • Washer Type: Crush
    • Ground Electrode Tip Material: Nickel
    • Short Style Spark Plug: No
    • Skirt: No
    • Center Electrode Core Material: Copper
    • Part Number: Bpr6egp
    • Resistor Type: Yes
    • Stock Number: 7084
    • Ground Electrode Tip Design: Trapezoid
    • Pre-Gap Size:
      • .040
      • 1.0
    • Ground Electrode Core Material: Nickel
    • Material Grade: Platinum
    • Center Electrode Projection: Mid Projection
    • Seat Type: Flat
    • Ground Electrode Quantity: 1
    • Insulator Material: Ceramic
    • Hex Size: 13/16"
    • Reach:
      • 0.750
      • 19.0
    • Center Electrode Tip Material: Platinum
    • Skirt Length: 0.0
    • Manufacturer Heat Range: 6
    • Ground Configuration: J-gap
    • Resistance: 5000.0
    • Insulator Height:
      • 2.20
      • 56.0
    • Thread Diameter:
      • 0.551
      • 14.0
  • Features:
    • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
    • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
    • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
    • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
    • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
    • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
3115, 3229, 3238, 3415, 3415-2, 4017, 4217, 4502, 4709, 6737, 7084, 7415, AP403, AP404, AP63, AP63DP2, AP64, AP64DP2...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1975 - Nissan 260Z L 2565 6 Cyl 2.6L -

Autolite
  • Autolite 63 Copper Spark Plug
  • Auto; OE Style
  • Copper Spark Plug
  • Product Attributes:
    • Center Electrode Projection: Mid Projection
    • Center Electrode Insulator Tip Projection:
      • 0.133
      • 3.38
    • Seat Type: Flat
    • Washer Included: Yes
    • Electrical Terminal Type: Removable Nut
    • Ground Electrode Quantity: 1
    • Grade Type: Regular
    • Core Nose Length:
      • 0.38
      • 9.65
    • Washer Type: Flat
    • Ground Electrode Tip Material: Nickel
    • Center Electrode Core Material: Copper
    • Hex Type: Hex
    • Resistor Type: Yes
    • Insulator Material: Ceramic
    • Indexed: No
    • Hex Size: 13/16
    • Reach:
      • 0.75
      • 19.05
    • Center Electrode Tip Material: Nickel
    • Ground Electrode Tip Design: Standard
    • Pre-Gap Size:
      • 0.034
      • 0.86
    • Resistance: 4000
    • Insulator Height:
      • 2.223
      • 56.46
  • Features:
    • The copper core center electrode aids in thermal control and improves resistance to fouling.
    • Its specially engineered high nickel alloy center and ground electrode provides extended life.
    • The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
    • Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
  • Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
05613100, 09482-00299, 114, 14 GH-7 DTUR, 14 R-6 DU, 14 R-6 DUX, 14 R-7 DU, 14 R-7 DUX, 14-6 DTU, 14-6 DU, 14-6 DUO, 14-7 DTU, 14-7 DU, 14-7 DUO, 176-5310, 19302733, 22721, 25164642...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1975 - Nissan 260Z L 2565 6 Cyl 2.6L 157

Wix
  • WIX Spin-On Lube Filter
  • Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Burst Pressure: 290
    • Duty Type: Ld
    • Bypass Relief Valve Setting: 8-11
    • Flow Rate: 7-9 Gpm
    • Media Material: Synthetic
    • Class: A
    • Outlet: 0.00
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1975 - Nissan 260Z L 2565 Canada 6 Cyl 2.6L 157

Gates
  • W/O A.C.
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .41
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 34.84
      • 885
    • Construction: Notched
    • Cross Section Designation: Hc41
    • Effective Length:
      • 34
      • 864
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0029974992, 0049979892, 0114596, 0119791, 023145271, 023145271B, 027903137A, 03-02-719-8, 030768, 039289, 0403341, 049903137, 054903137, 054903157, 06346, 074145271J, 0950863, 10-01866...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1975 - Nissan 260Z L 2565 Air Pump GAS 6 Cyl 2.6L -

Wix
  • WIX Spin-On Lube Filter
  • Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1975 - Nissan 260Z L 2565 Canada 6 Cyl 2.6L 157

Gates
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .47
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 35.62
      • 905
    • Construction: Notched
    • Cross Section Designation: Hc50
    • Effective Length:
      • 35
      • 889
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
000067524704, 0070186, 0110033, 0211787023, 0211787026, 027004127, 027004127Y, 027015078, 0303289, 0401353, 0407333, 04353, 069707829, 105807, 107038, 1104531, 1109614, 11378...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1975 - Nissan 260Z L 2565 Fan and Alternator GAS 6 Cyl 2.6L -

Gates
  • Cut to Length, 4"
  • Straight Heater Hose (Standard)
  • Product Attributes:
    • Molded: No
    • Working Pressure: 60
    • Weight Per Length: 11.70 Lbs./carton
    • Centerline Length:
      • 15.24
      • 15240
      • 600
    • End 1 Inside Diameter:
      • .625
      • 16
    • Material: Epdm
    • End 2 Inside Diameter:
      • .625
      • 16
  • Features:
    • Good resistance to high temperatures for extended periods of time, which prolongs service life
    • Meets SAE 20R3 Standard Wall Class D-2 requirements
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Caution: Do not use for fuel or oil transfer applications
  • Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1975 - Nissan 260Z L 2565 Heater Outlet GAS 6 Cyl 2.6L -

Rampage
  • Headlight Conversion Kit, 7 Inch Round Assemblies
  • Headlight Conversion Kit, 7 Inch Round Assemblies
  • Product Attributes:
    • Shape: Round
    • Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • Multi Surface Reflectors and Clear Glass Lens
    • Die Cast Aluminum Housing Quickly Dissipates Heat
    • Produces A Sixty Percent More Luminous Beam
    • Complex Reflector For Wider/Longer Beam Pattern
    • Sold In Pairs
    • Compatible With Most Factory Harnesses
  • Halogen conversion headlight kit with advanced multi surface reflector and clear glass lens. These headlights produce 60% more luminous beam than conventional OEM sealed beam headlamps. Made from a durable die cast aluminum reflector for more reliable quality and improved beam output. They are SAE/DOT approved for street legal use. Includes replaceable H4, 12V street legal 55/60 watt bulbs and will also accept off road bulbs up to 130 watts. Easy install for all replacement factory 7-inch round or 200mm rectangle headlamps. Also compatible with most factory harness and hardware for most street applications (50/60w). Lighting upgrade for most factory sealed beam applications -autos, trucks, SUV's, motorcycles, vintage vehicles and hot rods.

Additional Fitment Information:
Vehicle
1975 - Nissan 260Z

Pro-Tec
  • PROTEC-NEW Spin-On Lube Filter
  • Also Available In Master Pack Version Also Available In Master Pack Version
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 0410365, 0410423, 0410563, 0418038, 0418159, 0451103325, 0451104065, 1 986 452 001, 1 986 452 002...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1975 - Nissan 260Z L 2565 Canada 6 Cyl 2.6L 157

Terada
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Production: -11/1974, for front or Rear bar (4 per Wheel) These bushings are used on the link that attaches the sway bar to the suspension arm. Please refer to the specific application info to determine location and number of bushings required.

Additional Fitment Information:
Vehicle Prod. Date Range
1975 - Nissan 260Z To:11-00-74
Showing 1 - 10 of 12 products

Loading...