Shop By Product Matching "AE"
Image
Product
Price
- Part No. 0000 67 0115 83
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 39.12
- 994
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 38.5
- 978
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00006750903, 00092756, 0009930595, 0009974992, 0009975192, 0009975192A, 0009975792, 0019974092, 0019974992, 0019976092, 0029971892, 0049973692, 0069970592, 0070168, 0070182, 00938Y9210, 009975192, 0131403C1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1981 - Mazda RX-7 | R | 1146 | Air Conditioning | GAS | 2 Cyl 1.1L | - |
- Part No. 90861 10000
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1031
- 40.62
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 1016
- 40
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0049972092, 0059977192, 0070101, 008554, 0109700, 0110038, 0197811004, 0200066, 027016441, 027023887, 03-02-085-1, 031105091, 031106721, 0351452716, 035145271C, 035145271E, 035145271F, 0401403...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1981 - Mazda RX-7 | R | 1146 | Air Conditioning | GAS | 2 Cyl 1.1L | - |
- Headlight Conversion Kit, 7 Inch Round Assemblies
- Headlight Conversion Kit, 7 Inch Round Assemblies
- Product Attributes:
- Shape: Round
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Multi Surface Reflectors and Clear Glass Lens
- Die Cast Aluminum Housing Quickly Dissipates Heat
- Produces A Sixty Percent More Luminous Beam
- Complex Reflector For Wider/Longer Beam Pattern
- Sold In Pairs
- Compatible With Most Factory Harnesses
- Halogen conversion headlight kit with advanced multi surface reflector and clear glass lens. These headlights produce 60% more luminous beam than conventional OEM sealed beam headlamps. Made from a durable die cast aluminum reflector for more reliable quality and improved beam output. They are SAE/DOT approved for street legal use. Includes replaceable H4, 12V street legal 55/60 watt bulbs and will also accept off road bulbs up to 130 watts. Easy install for all replacement factory 7-inch round or 200mm rectangle headlamps. Also compatible with most factory harness and hardware for most street applications (50/60w). Lighting upgrade for most factory sealed beam applications -autos, trucks, SUV's, motorcycles, vintage vehicles and hot rods.
Additional Fitment Information:
| Vehicle |
|---|
| 1981 - Mazda RX-7 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Mazda RX-7 | Front |
- Fuel Filter
- OD 1.688 in.; 3.813 in.; 5/16 Barbed Inlet/Outlet In-line Filter~Fuel Filter
- K/N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements.
- In-Line Gas Filter
- Product Attributes:
- Filter Material: Cellulose Media
- Automotive Item Grade: High Performance
- Product Box Width: 3.100 In. (79mm)
- Package Material: Paperboard
- Product Box Length: 3.200 In. (81mm)
- WARNING CA Proposition 65: No
- Fitting Type:
- 0.3125 In. Npt
- Not Applicable
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Package Type: Box
- Product Box Height: 5.000 In. (127mm)
-
Features:
- Superior Construction
- Low Restriction
- Large Capacity
- Outstanding Filtration
- K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Mazda RX-7 | R | 1146 | 2 Cyl 1.1L | - |
- Fuel Filter
- OD 1.688 in.; 3.813 in.; 5/16 Barbed Inlet/Outlet
- K/N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements.
- In-Line Gas Filter
- Product Attributes:
- Filter Material: Cellulose Media
- Automotive Item Grade: High Performance
- Product Box Width: 3.100 In. (79mm)
- Package Material: Paperboard
- Product Box Length: 3.200 In. (81mm)
- WARNING CA Proposition 65: No
- Fitting Type:
- 0.3125 In. Npt
- Not Applicable
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Package Type: Box
- Product Box Height: 5.000 In. (127mm)
-
Features:
- Superior Construction
- Low Restriction
- Large Capacity
- Outstanding Filtration
- K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.
This Part Fits the Following OEM/Substitute Numbers:
0014773801, 0014773901, 022213470, 022213470A, 022213470B, 022213478, 0430124, 0450904004, 10034G1, 105483206102, 1130000, 1131700, 1139803, 1139815, 1200526, 120410, 120678, 13200250...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1981 - Mazda RX-7 |
Showing 1 - 6 of 6 products
Loading...