Shop By Product Matching "AE"
Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mazda B2000 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 36.62
- 930
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length: 914
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
000067014320, 0049977492, 0059970092, 0059977692, 0069976392, 0070163, 00938S8200, 0110034, 0200094, 0211786523, 0211789523, 0211790525, 0211790526, 0211791523, 027004128, 027068250, 034260849, 034260849C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1986 - Mazda B2000 | L | 1998 | Air Conditioning | GAS | 4 Cyl 2.0L | 122 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Green - 2 Pin - ECT
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mazda B2000 |
- Includes Guide Pin Boots, Piston Seals, Boots
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Mazda B2000 | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mazda B2000 |
- BEDRUG BED MAT 66" X 98" - CUT TO FIT
- Universal - Cut To Fit; 66 in. x 98 in.1/2 in. Thick; For Use w/Drop In Bed Liner; w/o Bed Rail Storage
- BedRug Floor Truck Bed Mat; Cut To Fit; 66 in. x 98 in. 1/2 in. Thick; For Use w/Drop In Bed Liner; w/o Bed Rail Storage;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Surface Configuration: Smooth
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: One Piece
- Mounting: Bed Floor / Shop Floor
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Tailgate
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Xmas Tree Studs
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Tailgate Mat Sold Separately
- Instruction Manual Included: Yes
- Category: Bedrug Mat - Universal
- Paintable: No
- Tailgate Cover Included: No
- Drilling Required: No
-
Features:
- Tailgate Mat Sold Separately
- - Cut to fit is required
- Constructed of the same, durable material as the BedRug liner, BedRug Mat works great with drop-in or spray-in/non-liner applications. Available for most popular truck applications, both styles are cut to match the contour of the truck bed.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 1986 - Mazda B2000 | United States |
Showing 1 - 6 of 6 products
Loading...