Shop By Product Matching "AE"
Image
Product
Price
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 36.43
- 925
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 35.6
- 904
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0026169000, 0039975592, 007753009502, 0119788, 01629, 0200097, 0211790013, 0211790513, 028145271F, 03-02-682-5, 046145271A, 046903137, 048903137, 050121039A, 05110243, 053903137, 068121039M, 0950900...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Acura Integra | L | 1590 | Power Steering | GAS | 4 Cyl 1.6L | - |
- Cut to Length, 16"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Acura Integra | L | 1590 | Heater To Valve | GAS | 4 Cyl 1.6L | - |
- Headlight Conversion Kit, 7 Inch Round Assemblies
- Headlight Conversion Kit, 7 Inch Round Assemblies
- Product Attributes:
- Shape: Round
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Multi Surface Reflectors and Clear Glass Lens
- Die Cast Aluminum Housing Quickly Dissipates Heat
- Produces A Sixty Percent More Luminous Beam
- Complex Reflector For Wider/Longer Beam Pattern
- Sold In Pairs
- Compatible With Most Factory Harnesses
- Halogen conversion headlight kit with advanced multi surface reflector and clear glass lens. These headlights produce 60% more luminous beam than conventional OEM sealed beam headlamps. Made from a durable die cast aluminum reflector for more reliable quality and improved beam output. They are SAE/DOT approved for street legal use. Includes replaceable H4, 12V street legal 55/60 watt bulbs and will also accept off road bulbs up to 130 watts. Easy install for all replacement factory 7-inch round or 200mm rectangle headlamps. Also compatible with most factory harness and hardware for most street applications (50/60w). Lighting upgrade for most factory sealed beam applications -autos, trucks, SUV's, motorcycles, vintage vehicles and hot rods.
Additional Fitment Information:
| Vehicle |
|---|
| 1987 - Acura Integra |
- For Large End of Boot outer boot
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle |
|---|
| 1987 - Acura Integra |
- For Large End of Boot inner boot
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle |
|---|
| 1987 - Acura Integra |
- For Small End of Boot inner or outer boot
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle |
|---|
| 1987 - Acura Integra |
- This kit contains 2 universal clamps; 1 large clamp for the wide boot end and 1 small clamp for the narrow boot end (use 1 clamp kit per boot).
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle |
|---|
| 1987 - Acura Integra |
- Black
- All Weather Floor Mats; Black; Rear;
- All Weather Floor Mats
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Made Of Natural Heavy Duty Rubber
- Deeply Sculpted Channels
- Designed To Trap Water/Road Salt/Mud And Sand
- Made Of 16 lbs. Of Pliable Natural Rubber
- Will Not Curl/Crack/Harden In Sub-Zero Weather
- Anti-Skid Ridges To Prevent Shifting
- Protective Non-Stick Finish For Quick Cleanup
- Hold Up To 1.5 Quarts Of Water Without Spilling
- The WeatherTech All-Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. They wont curl, crack or harden in sub-zero weather. Our All-Weather Floor Mats also have anti-skid ridges to prevent shifting in your vehicle and come with a protective, non-stick finish to make cleanup quick and easy. Choose from Black, Tan or Grey to complement virtually any interior color. Includes a 10 year warranty.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1987 - Acura Integra | Rear |
- Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- The Premier Splashguard from RoadSport(TM) is a universal fit product that comes in 3 sizes. The A-B-C sizing is designed to eliminate the need for custom fit applications and to allow you to simply select a size that best suits your style and choice of coverage. The product is sold in pairs and comes with installation hardware and instructions. Once you make your size selection, you can then choose either plain black or from a variety of decorative designs. The A-Series Premier Splashguards fit nicely on compact cars and smaller mini-vans. The B-Series Premier Splashguards generally fit well on larger cars, mid-sized vans, SUVs, Crossovers and smaller pick-up trucks. The C-Series Premier Splashguards fit well on all full size pick-up trucks, vans and SUVs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1987 - Acura Integra | Rear |
- Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- The Premier Splashguard from RoadSport(TM) is a universal fit product that comes in 3 sizes. The A-B-C sizing is designed to eliminate the need for custom fit applications and to allow you to simply select a size that best suits your style and choice of coverage. The product is sold in pairs and comes with installation hardware and instructions. Once you make your size selection, you can then choose either plain black or from a variety of decorative designs. The A-Series Premier Splashguards fit nicely on compact cars and smaller mini-vans. The B-Series Premier Splashguards generally fit well on larger cars, mid-sized vans, SUVs, Crossovers and smaller pick-up trucks. The C-Series Premier Splashguards fit well on all full size pick-up trucks, vans and SUVs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1987 - Acura Integra | Front |
Showing 1 - 10 of 11 products
Loading...