Image
Product
Price
- Product Attributes:
- Top Width: .53
- Outside Circumference:
- 37.27
- 946.66
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 37
- 939.80
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
02117-92523, 11502336, 11720-V5001, 11720-V5012, 11920-05D01, 11920-J7525, 11920-N9505, 11920-P30101, 11920-W3200, 12.5X940, 13A0940, 141-1237, 16-372, 16.97-07553, 16370, 17-372, 17370, 17371...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Nissan Sentra | Water Pump and Power Steering |
- NGK G-Power Platinum Spark Plug
- Gap 0.044"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Standard Replacement
- Service Number: Bpr6egp
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bpr6egp
- Resistor Type: Yes
- Stock Number: 7084
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16"
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.20
- 56.0
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
3115, 3229, 3238, 3415, 3415-2, 4017, 4217, 4502, 4709, 6737, 7084, 7415, AP403, AP404, AP63, AP63DP2, AP64, AP64DP2...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Nissan Sentra | L | 1597 | 4 Cyl 1.6L | 97 |
- Autolite 63 Copper Spark Plug
- Auto; OE Style
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.38
- 9.65
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 13/16
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.034
- 0.86
- Resistance: 4000
- Insulator Height:
- 2.223
- 56.46
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
05613100, 09482-00299, 114, 14 GH-7 DTUR, 14 R-6 DU, 14 R-6 DUX, 14 R-7 DU, 14 R-7 DUX, 14-6 DTU, 14-6 DU, 14-6 DUO, 14-7 DTU, 14-7 DU, 14-7 DUO, 176-5310, 19302733, 22721, 25164642...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Nissan Sentra | L | 1597 | 4 Cyl 1.6L | 97 |
- 9004;Extreme Brightness;Turbo Fan Cooling
- (COMPARE TO ORIGINAL - OPTION 1)
- EXTREME BRIGHTNESSIf you?re looking for the brightest monster of all it is our Xtreme series LED headlight bulb. The Xtreme Series can produce 5x the light output of stock halogen bulbs and is brighter than a 35W HID system.
- Product Attributes:
- Power Consumption: 45 Watt
- Light Output: 10,000 Lumen Per Kit
- IP Rating: Ip65
- Amp Draw per Bulb: 3.0 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Powerful 10,000 lumens output produces stunning illumination that beats the 35W HID system
- Precision optics designed for long range visibility with zero glare
- Patented VacPipe cooling integrated heat sink allows for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in Advanced Temperature Regulation provides dependable operation at full intensity
- Temperature Regulation provides dependable operation at full intensity
- Bulb collar rotates 360degree for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Automotive grade LED chips paired with advanced cooling technology make the Xtreme Series the brightest LED headlight bulbs on the market. Produces a stunning output that's brighter than a 35W HID system and 5x brighter than a stock halogen bulb. Bulky fan cooling LED bulbs have become history. The Xtreme Series is designed to be compact enough to fit in the tightest spaces.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Nissan Sentra | High Beam and Low Beam |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-4012, 28016-AA011, 28016-AA011NT, 28316-AE000, 28316-FE000, 32006324, 38-01308, 38-01316, 38-09800, 40210-01E00, 40210-16E00, 43210-01E00, 43210-16E00, 513015, 517008, 64-02273, 906000006, CR7016...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1988 - Nissan Sentra | Rear | 4WD |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.3
- 287
- End 1 Inside Diameter:
- 1.06
- 27
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.06
- 27
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
14-1880-6, 142-6043, 142-6045, 142-6133, 1657111040, 1657111071, 1657111110, 1657111210, 1785156B00, 1785160B00, 1785463B00, 1785463B10, 1785463E00, 1785563B20, 1785563B2D, 19501P08000, 20157S, 2099...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Nissan Sentra | L | 1597 | Lower | GAS | 4 Cyl 1.6L | 97 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 32.63
- 829
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 32
- 813
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0059976292, 0069976892, 0117700, 0211784523, 027002507, 027002507Y, 027015077, 0401323, 0407323, 103811, 11-2X820, 110496, 11361, 11502323, 1172016A01, 1172016A10, 1172018A10, 1192001M01...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Nissan Sentra | L | 1597 | Air Conditioning | GAS | 4 Cyl 1.6L | 97 |
- Cut to Length, 2"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Nissan Sentra | L | 1597 | Water Pump To Pipe | GAS | 4 Cyl 1.6L | 97 |
- Front Floor Mats
- Heavy Duty Floor Mats - Front Floor Mats
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- Location: Front Row
- CA Prop 65: Y
- Category: Heavy Duty Floor Mats
- Fitment: Semi-universal Fit
- Requires Drilling: No
- Driver Position: Left Hand Drive Only
-
Features:
- Easily cleaned with patented Nibs on the reverse side to keep mat from shifting.
- The perimeter edge is raised to help keep all manner of mess contained, right where you want it.
- Our raised ridges help to keep your feet out of the mud, water, and dirt you just tracked in. You’re welcome.
- With the perfect balance of strength and softness, our rubberized DuraGrip™ material delivers no-slip, no-slide, driving confidence no matter what the road brings.
- UniEdge™ creates a wall around the center channel that funnels mud, snow and other liquids into the recessed ribs—containing the mess, until you can yank, dump, wash and repeat.
- Our exclusive StayPut Cleats™ help keep your liner from shifting around underfoot like lesser liners.
- When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem, we’ll replace it.
- Proudly made in the USA.
- It's unbeatable Husky durability, custom fit to your vehicle, built for a lifetime of abuse. Its DuraGrip™ material stands up to harsh chemicals, while its UniEdge™ and center channel keep mud, snow and liquids contained, until you're ready to remove, wash and hit the road. Its StayPut Cleats™ keep it firmly anchored underfoot, and all Husky Heavy Duty floor mats mats are guaranteed for life. Found on the floors of the toughest trucks, vans and SUVs on earth.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 1988 - Nissan Sentra | Front | United States |
- FRAM, PH3614, Oil Filter
- Supersedes PH3682 (Consolidation) Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Grade: Advanced
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 04E 115 561T, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Nissan Sentra | L | 1597 | 4 Cyl 1.6L | 97 |
Showing 1 - 10 of 34 products
Loading...