Shop By Product Matching "AE"
Image
Product
Price
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.1
- 384
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
021920, 046, 09844243, 0A0880, 100899, 101337, 11531711321, 1303X00, 134MFT1, 1365619, 14-1642-4, 142-5775, 142-5930, 1433180, 155613A, 15562826, 1616812, 1616813...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1989 - Toyota Land Cruiser | L | 3956 | Upper | GAS | 6 Cyl 4.0L | - |
- WIX Spin-On Lube Filter
- Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Burst Pressure: 290
- Duty Type: Ld
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Synthetic
- Class: A
- Outlet: 0.00
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Toyota Land Cruiser | L | 3956 | Canada | 6 Cyl 4.0L | - |
- Standard Multi-Purpose Light Bulb Box of 1
- Boxed Product Halogen Sealed Beam Type
- Wagner Standard H4656 Standard Multi-Purpose Light Bulb Box of 1
- Product Attributes:
- Bulb Color: Clear
- Average Rated Life: 450
- Voltage: 12.800
- Wattage: 35.000
- Secondary Filament Type: C-6
- Amperage Rating: 2.730
- Secondary Average Rated Life: 200
- Filament Type: C-6
- Secondary Voltage: 12.800
- Secondary Amperage Rating: 2.730
- Filament Quantity: 2
- Secondary Brightness: 15000.000
- Secondary Wattage: 35.000
- Bulb Type: Rectangle Bulb 100mm X 165mm
- Bulb Base Type: 3 Lug Contact
- Brightness: 25000.000
-
Features:
- SHINES BRIGHT -- Delivers a brighter, whiter light and longer life than incandescent lighting
- HIGH QUALITY -- Extra strong filament withstands vibration and coated terminals inhibits corrosion
- FOR CHALLENGING CONDITIONS -- Non-reflective bottom shelf reduces glare in rain, snow and fog
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture, industrial and powersport applications
- Wagner® halogen sealed beams are the original sealed beam that delivers a brighter, whiter light and longer life than incandescent lighting. You’ll appreciate the non-reflective bottom shelf that inhibits glare in fog, rain and snow.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
H4652, H4656, H4656BX, H4656C1, H4656XVBX
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Toyota Land Cruiser | Low Beam |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Toyota Land Cruiser | L | 3956 | Canada | 6 Cyl 4.0L | - |
- W/Aux. Heater; Cut to Length, 5"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1989 - Toyota Land Cruiser | L | 3956 | Heater To Pipe-1 | GAS | 6 Cyl 4.0L | - |
- with Rear 0.625 (in) Diameter Mount with Rear Raised Height 0 (in)
- RS5000X
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15998555, 22007756, 22011979, 22011983, 22011984, 22011988, 22012145, 22046802, 22046805, 22046811, 22046812, 22064003, 22064004, 22064063, 22064064, 22064066, 22064067, 22064069...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1989 - Toyota Land Cruiser | Rear | 4WD |
- Headlight Conversion Kit, 7 Inch Round Assemblies
- Headlight Conversion Kit, 7 Inch Round Assemblies
- Product Attributes:
- Shape: Round
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Multi Surface Reflectors and Clear Glass Lens
- Die Cast Aluminum Housing Quickly Dissipates Heat
- Produces A Sixty Percent More Luminous Beam
- Complex Reflector For Wider/Longer Beam Pattern
- Sold In Pairs
- Compatible With Most Factory Harnesses
- Halogen conversion headlight kit with advanced multi surface reflector and clear glass lens. These headlights produce 60% more luminous beam than conventional OEM sealed beam headlamps. Made from a durable die cast aluminum reflector for more reliable quality and improved beam output. They are SAE/DOT approved for street legal use. Includes replaceable H4, 12V street legal 55/60 watt bulbs and will also accept off road bulbs up to 130 watts. Easy install for all replacement factory 7-inch round or 200mm rectangle headlamps. Also compatible with most factory harness and hardware for most street applications (50/60w). Lighting upgrade for most factory sealed beam applications -autos, trucks, SUV's, motorcycles, vintage vehicles and hot rods.
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Toyota Land Cruiser |
- PROTEC-NEW Spin-On Lube Filter
- Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 0410365, 0410423, 0410563, 0418038, 0418159, 0451103325, 0451104065, 1 986 452 001, 1 986 452 002...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Toyota Land Cruiser | L | 3956 | Canada | 6 Cyl 4.0L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -07/1988, For EFI models
- Green - 2 Pin - ECT
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1989 - Toyota Land Cruiser | To:07-00-88 |
- with Rear 0.625 (in) Diameter Mount with Rear Raised Height 0 (in)
- RS9000XL
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15998555, 22007756, 22011979, 22011983, 22011984, 22011988, 22012145, 22046802, 22046805, 22046811, 22046812, 22064003, 22064004, 22064063, 22064064, 22064066, 22064067, 22064069...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1989 - Toyota Land Cruiser | Rear | 4WD |
Showing 1 - 10 of 15 products
Loading...