Image
Product
Price
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
0002030702, 0588220, 0982656, 09913360, 101681, 101684, 1022789, 1101681, 112, 14-2186-4, 1405560U10, 142-0207, 1565137, 1592, 1657316020, 18-70704, 1B16597H01, 1J0122101CC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1989 - Toyota MR2 | L | 1587 | Upper - Pipe To Pipe | GAS | 4 Cyl 1.6L | - |
- Cut to Length, 7"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Toyota MR2 | L | 1587 | GAS | 4 Cyl 1.6L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -07/1988, For EFI models
- Green - 2 Pin - ECT
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1989 - Toyota MR2 | To:07-00-88 |
- Premium
- Production: -11/1989, Attaches to the AC compressor bracket.
Additional Fitment Information:
| Vehicle | Position | Prod. Date Range |
|---|---|---|
| 1989 - Toyota MR2 | Air Conditioning | To:11-00-89 |
Additional Fitment Information:
| Vehicle | Transmission | Position | Sub Model | Prod. Date Range |
|---|---|---|---|---|
| 1989 - Toyota MR2 | Automatic | Front Right | Super Charged | To:11-30-89 |
Additional Fitment Information:
| Vehicle | Transmission | Position | Sub Model | Prod. Date Range |
|---|---|---|---|---|
| 1989 - Toyota MR2 | Automatic | Front Left | Super Charged | To:11-00-89 |
- Engine Oil Drain Plug For Toyota Nissan Corolla RAV4 Rogue Lexus Camry Tacoma C
- Regular M12 x 1.25 Thread
- Engine Oil Drain Plug 95-7738 For Toyota Nissan Corolla RAV4 Rogue Lexus Camry Tacoma Sienna Sentra Highlander Yaris Matrix INFINITI Altima Tundra Murano RX350 4Runner Pathfinder Versa Venza Kicks C V
- Top Quality
- Product Attributes:
- WebNameEbay4: For Toyota Nissan Corolla Rav4 Rogue Lexus Camry C Engine Oil Drain Plug 95-7738
- ComponentsSummaryRegularWithBrands: Top Quality Engine Oil Drain Plug
- ComponentsSummaryShort: Engine Oil Drain Plug
- ComponentsSummaryLongWithBrands: 1x Top Quality Engine Oil Drain Plug
- WebNamePlain: Engine Oil Drain Plug 95-7738
- ComponentsSummaryShortWithBrands: Top Quality Engine Oil Drain Plug
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Engine Oil Drain Plug
- WebNameLong: Engine Oil Drain Plug 95-7738 For Toyota Nissan Corolla Rav4 Rogue Lexus Camry Tacoma Sienna Sentra Highlander Yaris Matrix Infiniti Altima Tundra Murano Rx350 4runner Pathfinder Versa Venza Kicks Frontier Qashqai Pontiac Vibe Note Echo Micra Prius C-hr S
- WebNameShort: Engine Oil Drain Plug 95-7738 For Toyota Nissan Corolla Rav4 Rogue Lexus Camry Tacoma Sienna Sentra
- ComponentsSummaryRegular: Engine Oil Drain Plug
- WebNameRegular: Engine Oil Drain Plug 95-7738 For Toyota Nissan Corolla Rav4 Rogue Lexus Camry Tacoma Sienna Sentra Highlander Yaris Matrix Infiniti Altima Tundra Murano Rx350 4runner Pathfinder Versa Venza Kicks C V
- WebNameEbay2: Engine Oil Drain Plug 95-7738 For Toyota Nissan Corolla Rav4 Rogue Lexus Camry C
- WebNameEbay3: Engine Oil Drain Plug 95-7738 For Toyota Nissan Corolla Rav4 Rogue Lexus Camry C
- WebNameEbay: Engine Oil Drain Plug For Toyota Nissan Corolla Rav4 Rogue Lexus Camry Tacoma C
-
Features:
- TQ exclusive alloy steel formula enhances strength and durability
- Allows for tighter tolerances vs traditional competitor plug, providing a more durable and extended life for the plug
- Precision built for easy installation and durability
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Part Reference Numbers : 090038 1069 7738
- TQ Engine Oil Drain Plug
This Part Fits the Following OEM/Substitute Numbers:
090038, 1069
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Toyota MR2 |
Showing 1 - 7 of 7 products
Loading...