Image
Product
Price
- Electric Fuel Pump
- Product Attributes:
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Connector Shape: Rectangle
- Minimum Pressure: 43
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Maximum Amperage Draw: 6.0
- Inlet Outside Diameter: 11.0
- Average Flow Rating: 26.0
- Wire Quantity: 0
- Average Current Draw: 6.0
- Maximum Pressure: 94.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
0K01A13350B, 0K01D-13-35Z, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-54830, 15100-58B00, 15100-58B01, 15100-58B10, 15100-60G00, 15100-60G20, 15100-60G21, 15100-61A1V, 15100-61AA1, 15100-65D02, 15100-65D12...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1493 | In-Tank | 2 | 4 Cyl 1.5L | CX | - |
- Suspension Ball Joint
- Product Attributes:
- Nuts Included:
- Oui
- Sí
- Yes
- Bushing Included:
- No
- Non
- Tapered Stud:
- Oui
- Sí
- Yes
- Housing Press Fit Diameter: 40.25 Mm
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Thread Pitch: 1.25 Mm
- Maximum Outside Diameter: 61
- Wrench Size: 12 Mm
- Articulación de rótula instalada: Sí
- Bushings Included:
- No
- Non
- Greaseable:
- No
- Non
- Ball Joint Assembly:
- Oui
- Sí
- Yes
- Cotter Pin Hole:
- Oui
- Sí
- Yes
- Diámetro del acoplado a presión de la caja: 40,25mm
- Dust Boot Material:
- Policloropreno
- Polychloroprene
- Attachment Type:
- Cono
- Taper
- Stud Type:
- Roscado
- Threaded
- Adjustable:
- No
- Non
- Mount Plate Included:
- No
- Non
- Color:
- Grey
- Gris
- Suspension Grade Type: Premium
- Stud Thread Pitch: 1.5
- Bolts/Studs Included:
- Oui
- Yes
- Bushing Quantity: 0
- Cotter Pin Included:
- No
- Non
- Type:
- Roscado
- Threaded
- Material:
- Acero
- Steel
- Ball Joint Installed:
- Oui
- Yes
- Stud Thread Length: 35.5
- Mounting Bolts Included:
- No
- Non
- Stud Taper Per Foot: 2
- Washers Included:
- No
- Non
- Mounting Hole Quantity: 0
- Castle Nut Included:
- Oui
- Sí
- Yes
- Pernos/argollas incluidos: Sí
- Grease Fitting Included:
- No
- Non
- Dust Boot Included:
- Oui
- Sí
- Yes
- Stud Tapered End 1 Diameter: 27.2
- Bearing Material:
- Polímero
- Polymer
- Contenidos del paquete: Rótula, Tuerca De Seguridad, Chaveta, Anillo De Retención
- Mounting Type:
- A Presión
- Press-in
- Nuts Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
45D2196, 46D2196A, 51220S04003, 51220SR3003, 610.40016, FA2084, GK9802, JBJ153, K-9802, K9802, MK9802, TC836, TXK9802
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Honda Civic | Front Lower |
- Spare Tire And Jack Tool Kit
- Packaging Type: Box
- Product Attributes:
- Color:
- Black
- Negro
- Plata
- Silver
- Contenidos del paquete:
- 1 Bolsa
- 1 Brazo De Extensión
- 1 Llave De Espárrago
- Wrench Size: 19 Mm
- Material:
- Acero
- Steel
- Color:
-
Features:
- Ideal replacement - this spare tire jack handle and lug wrench matches the original part on specified vehicles
- Durable construction - made of tough, durable materials and coated with corrosion-resistant finish
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone dimensional and material testing to ensure a quality fit and long service life
- Replace a damaged or missing spare tire jack handle and wheel lug wrench with this direct replacement. Made of tough, durable materials, this tool is made to the original equipment dimensions and finished to prevent corrosion.
This Part Fits the Following OEM/Substitute Numbers:
5083894AA, 5083894AB, 5164068AA, 52106835AC, 52106835AD, 52106835AE, 52106835AF, 52106835AG, 52113502AB, 52113502AC, 52113502AE, 52121986AA, 52121986AB, 52121986AC, 52121986AD, 52121986AE, 52121986AF, 52121986AG...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - Honda Civic |
- Relief pressure 16 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10242, 10242ST, 12R19, 1640131520, 1640131650, 1640131792, 1640131830, 1640136020, 1640137520, 1640146610, 1640150370, 1640175440, 1650221060, 1650221080, 1678-20126, 17037, 19045PWA004, 19045RAA003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Honda Civic | L | 1493 | 4 Cyl 1.5L | - |
- Electric Fuel Pump
- Japan Built USA Built
- Product Attributes:
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Connector Shape: Rectangle
- Minimum Pressure: 44
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Maximum Amperage Draw: 5.0
- Inlet Outside Diameter: 11.0
- Average Flow Rating: 29.0
- Wire Quantity: 0
- Average Current Draw: 5.0
- Maximum Pressure: 85.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1493 | In-Tank | 4 | 4 Cyl 1.5L | DX | - |
- Electric Fuel Pump
- Product Attributes:
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Connector Shape: Rectangle
- Minimum Pressure: 44
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Maximum Amperage Draw: 5.0
- Inlet Outside Diameter: 11.0
- Average Flow Rating: 29.0
- Wire Quantity: 0
- Average Current Draw: 5.0
- Maximum Pressure: 85.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
152-0886, 152-0925, 152-0961, 152-0964, 152-0965, 152-0970, 152-0972, 152-0998, 17040-S0X-A00, 17040-S0X-A01, 17040-S10-A10, 17040-S10-C20, 17040-S2A-930, 17040-S30-A31, 17040-S30-A50, 17040-S30-L01, 17040-SR2-A31, 17040-SR3-A31...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1493 | In-Tank | 2 | 4 Cyl 1.5L | DX | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.3
- 287
- End 1 Inside Diameter:
- 1.06
- 27
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.06
- 27
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
14-1880-6, 142-6043, 142-6045, 142-6133, 1657111040, 1657111071, 1657111110, 1657111210, 1785156B00, 1785160B00, 1785463B00, 1785463B10, 1785463E00, 1785563B20, 1785563B2D, 19501P08000, 20157S, 2099...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1588 | Upper | GAS | 4 Cyl 1.6L | 98 |
- Engine Mount
- OEM Replacement
- Product Attributes:
- Per Vehicle Quantity: 1
- Mount Material: Steel
- Mounting Position: Rear
- Grade Type: Regular
- Mounting Hardware Included: No
- Bushing Color: Black
- Stud Quantity: 0
- Mounting Hole Quantity: 4
- Meets or Exceeds Original Equipment Manu: Yes
- Heat Shield Included: No
- Housing Color: Gray
- Bracket Color: Black
This Part Fits the Following OEM/Substitute Numbers:
50810SR3030, 50810SR3981, 50810SR3983, 50810ST0980, 50810ST7000, 50810ST7Z00, 601058, 6022110, 6022165, 8010, 8897, A6506, B8010, BK8010, BK8897, EM-8897
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1588 | Rear | 4 Cyl 1.6L | Si | 98 |
- AEM Short Ram Intake System
- Includes Dryflow Air Filter/Alum. Tubing/Clamps; Polished;CARB E.O. D-670-15 All Intake Tube Ports Needed For The Specified Applications Are Included
- AEM s Performance Short Ram Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly. The intake tube has an attractive yet durable powder-coated finish.
- Short Ram Induction System
- Product Attributes:
- Oil Included: No Filter Oil Required
- Air Filter Height: 5.125 In. (130mm)
- Clamp Style: Regular
- Coupler Color: Not Applicable
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: 21-201dk
- Item Weight: 6.000 Lbs. (2.7 Kg)
- Filter Material: Non-woven Synthetic
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.500 In. (64mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.500 In. (64mm)
- Intake Pipe Inlet Length: 28.000 In. (711mm)
- Air Filter Element Washable: Yes
- Couplers Included: No
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 28.000 In. (711mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Affordable and Simple Horsepower Upgrade
- Improved Throttle Response and Engine Sound
- Low Restriction Aluminum Intake Tube
- Easy To Install With Common Hand Tools
- Lasts Up To 100 000 Miles Before Service Is Required
- Washable And Reusable Lifetime Air Filter
- AEM Limited Lifetime Warranty
- The AEM 22-401P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose, vacuum lines and inlet air temperature sensor (where equipped). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-401P vehicle applications to determine the legal status for each vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1588 | 4 Cyl 1.6L | Si | 98 |
- AEM Short Ram Intake System
- Includes Dryflow Air Filter/Alum. Tubing/Clamps; Polished;CARB E.O. D-670-15
- AEM s Performance Short Ram Air Intake System gives you more power and acceleration by replacing the restrictive factory air filter and air intake assembly. The intake tube has an attractive yet durable powder-coated finish.
- Short Ram Induction System
- Product Attributes:
- Oil Included: No Filter Oil Required
- Air Filter Height: 5.125 In. (130mm)
- Clamp Style: Regular
- Coupler Color: Not Applicable
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: 21-201dk
- Item Weight: 6.000 Lbs. (2.7 Kg)
- Filter Material: Non-woven Synthetic
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.500 In. (64mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.500 In. (64mm)
- Intake Pipe Inlet Length: 28.000 In. (711mm)
- Air Filter Element Washable: Yes
- Couplers Included: No
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 28.000 In. (711mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Affordable and Simple Horsepower Upgrade
- Improved Throttle Response and Engine Sound
- Low Restriction Aluminum Intake Tube
- Easy To Install With Common Hand Tools
- Lasts Up To 100 000 Miles Before Service Is Required
- Washable And Reusable Lifetime Air Filter
- AEM Limited Lifetime Warranty
- The AEM 22-401P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose, vacuum lines and inlet air temperature sensor (where equipped). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-401P vehicle applications to determine the legal status for each vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1588 | 4 Cyl 1.6L | Si | 98 |
Showing 1 - 10 of 30 products
Loading...