Shop By Product Matching "AE"
Image
Product
Price
- NGK Laser Iridium Spark Plug
- Gap 0.044"
- Laser Iridium Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.14
- 3.5
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Ifr6e11
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ifr6e11
- Resistor Type: Yes
- Stock Number: 6741
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
- NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
09482-00548, 1765272, 3172, 3403, 3418, 4504, 4702, 6741, 9603, 9604, 9607, 98079-56A7S, FR7DII33X , FR7KII33X , FR7LII33X, IK20TT, MD372588, PK20PR-L13...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Acura Legend | V | 3206 | 6 Cyl 3.2L | - |
- Relief pressure 16 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10242, 10242ST, 12R19, 1640131520, 1640131650, 1640131792, 1640131830, 1640136020, 1640137520, 1640146610, 1640150370, 1640175440, 1650221060, 1650221080, 1678-20126, 17037, 19045PWA004, 19045RAA003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Acura Legend | V | 3206 | 6 Cyl 3.2L | - |
- Replaces PGD536C
- Raybestos Element 3
- Product Attributes:
- Inner Pad Width: 3.490
- Outer Pad Height: 1.870
- Outer Pad Width: 3.490
- Inner Pad Height: 1.870
- Inner Pad Overall Thickness: 0.240
- Mounting Hardware Included: Yes
- Friction Material Composition: Hybrid
- Outer Pad Overall Thickness: 0.240
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
06430S7S000, 082-1498, 086-1498C, 087-1498, 088-1498D, 088-1498M, 100.05360, 101.05360, 102.05360, 103.05360, 104.05360, 105.05360, 105.05361, 106.05360, 106.05361, 107.05360, 108.05360, 109.05360...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Acura Legend | Rear |
- Raybestos R-Line
- Product Attributes:
- Inner Pad Width: 3.490
- Outer Pad Height: 1.870
- Outer Pad Width: 3.490
- Inner Pad Height: 1.870
- Inner Pad Overall Thickness: 0.240
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.240
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
06430S7S000, 082-1498, 086-1498C, 087-1498, 088-1498D, 088-1498M, 100.05360, 101.05360, 102.05360, 103.05360, 104.05360, 105.05360, 105.05361, 106.05360, 106.05361, 107.05360, 108.05360, 109.05360...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Acura Legend | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- TW Sensor
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Acura Legend |
- For Small End of Boot inner or outer boot
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Acura Legend |
- For Large End of Boot Inner or Outer boot
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Acura Legend |
- This kit contains 2 universal clamps; 1 large clamp for the wide boot end and 1 small clamp for the narrow boot end (use 1 clamp kit per boot).
- This kit contains 2 universal clamps: 1 for the wide boot end and 1 for the narrow boot end (use 1 kit per boot).
- 1 large + 1 small clamp
- 1 Large + 1 Small Clamp
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Acura Legend |
- Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- The Premier Splashguard from RoadSport(TM) is a universal fit product that comes in 3 sizes. The A-B-C sizing is designed to eliminate the need for custom fit applications and to allow you to simply select a size that best suits your style and choice of coverage. The product is sold in pairs and comes with installation hardware and instructions. Once you make your size selection, you can then choose either plain black or from a variety of decorative designs. The A-Series Premier Splashguards fit nicely on compact cars and smaller mini-vans. The B-Series Premier Splashguards generally fit well on larger cars, mid-sized vans, SUVs, Crossovers and smaller pick-up trucks. The C-Series Premier Splashguards fit well on all full size pick-up trucks, vans and SUVs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Acura Legend | Front |
- Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; A Series; 12.75 in. x 7.375 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Designed To Fit Most Fender Configurations
- Popular Models And Colors Provide Maximum Coverage
- Molded To Original Equipment Specifications
- Guards Remain Flexible Down To -40F
- Will Not Crack Or Discolor
- Supplied With Installation Instructions And Mounting Hardware
- Packaged One Pair Per Display Card
- The Premier Splashguard from RoadSport(TM) is a universal fit product that comes in 3 sizes. The A-B-C sizing is designed to eliminate the need for custom fit applications and to allow you to simply select a size that best suits your style and choice of coverage. The product is sold in pairs and comes with installation hardware and instructions. Once you make your size selection, you can then choose either plain black or from a variety of decorative designs. The A-Series Premier Splashguards fit nicely on compact cars and smaller mini-vans. The B-Series Premier Splashguards generally fit well on larger cars, mid-sized vans, SUVs, Crossovers and smaller pick-up trucks. The C-Series Premier Splashguards fit well on all full size pick-up trucks, vans and SUVs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Acura Legend | Rear |
Showing 1 - 10 of 11 products
Loading...