Image
Product
Price
- Champion Copper Plus- Boxed - RC10YC4
- Gap 0.044in; Plug Type RC10YC4
- Champion Copper Plus 346 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.041
- 1.05
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Plug Type: Rc10yc4
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
7956, FR6AP10, FR7DCX, PFR5N11, RC10YC4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Toyota Previa | L | 2438 | 4 Cyl 2.4L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.1
- 384
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
021920, 046, 09844243, 0A0880, 100899, 101337, 11531711321, 1303X00, 134MFT1, 1365619, 14-1642-4, 142-5775, 142-5930, 1433180, 155613A, 15562826, 1616812, 1616813...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1997 - Toyota Previa | L | 2438 | Lower - Engine To Pipe | GAS | 4 Cyl 2.4L | - |
- 17'' ANCO Extreme Weather Wiper Blade
- Upgrade Option from Conventional Blade to Beam Blade this is a 17'' JAPTS Beam Wiper Blade
- 9mm Hook, 9x4 Hook, 3/16 Side Lock, 7mm Bayonet, Side Pin (22mm), Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- ANCO Extreme Weather Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- AAP_UDA_4: 110
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Beam
- Adapter Type: Swift One-click
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: Yes
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (22mm)
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: No
- Small Engine: N
-
Features:
- Extreme Weather Blade
- Articulated Contact Technology one-piece, flexible design that comforms to all windshields for a superior blade-to-windshield contact
- Arctic Armor is a ruggedly constructed armor that protects the blade from severe weather
- SWIFT Universal One-Click provides for a quick and easy wiper blade replacement
- ANCO Extreme Weather blades feature a ruggedly constructed armor to protect the blade against extreme weather conditions. The one-piece flexible design conforms to the curve of all windshields for a streak-free wipe. ANCO Extreme Weather blades offer performance you can count on, even in the harshest conditions.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Toyota Previa | Rear |
- 26" TRICO View Wiper Blade
- Reuse Mounting Bracket and Hardware OE Design this is a 26'' JAPTS Conventional Wiper Blade
- 9mm Hook, 9x4 Hook
- TRICO View Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Blade Material: Natural Rubber
- Frame Material: Steel
- AAP_UDA_4: 110
- Contains Electronic Components: No
- Engine Specific: N
- ASIN Parent: B00j6cu09y
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- ASIN Child: B00j6cu09y
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- Pre-attached universal adaptor fits most arm types directly
- Available in lengths from 11" to 28
- Conventional Wiper Blade
- Engineered for better wrap on today's highly curved windshields
- Precision-cut rubber edge creates superior wiping action
- Aerodynamic steel frame provides exceptional strength and durability
- TRICO View Wiper Blade feature an aerodynamic steel frame that delivers exceptional strength and durability and is engineered to provide a better wrap on today's highly curved windshields. The pre-attached universal adaptor fits 9mm hook, 9x4 hook, side lock and bayonet arms.
This Part Fits the Following OEM/Substitute Numbers:
1002737093, 36-261C, WW-2601-WT
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Toyota Previa | Front Right |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Toyota Previa | L | 2438 | 4 Cyl 2.4L | - |
- FRAM, PH3614, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Grade: Advanced
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 04E 115 561T, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Toyota Previa | L | 2438 | 4 Cyl 2.4L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1997 - Toyota Previa | L | 2438 | Reservoir To Radiator | GAS | 4 Cyl 2.4L | - |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .75
- 19
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10017940, 10065640, 10065675, 10120065, 10135307, 10145119, 10188037, 10218423, 10227419, 10385281, 10441374, 1405531U00, 1405646R00, 1405670F05, 14244S, 15077061, 15123654, 15258060...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1997 - Toyota Previa | L | 2438 | Coupler To Thermostat | GAS | 4 Cyl 2.4L | - |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 04152-64010 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1997 - Toyota Previa | L | 2438 | Canada | 4 Cyl 2.4L | Supercharged | - |
- FRAM, XG3614, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: 3/4-16
- Grade: Ultimate
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 04E 115 561T, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Toyota Previa |
Showing 1 - 10 of 16 products
Loading...